usb disk installations
Ow Mun Heng
Ow.Mun.Heng at wdc.com
Fri Sep 3 02:57:45 UTC 2004
On Fri, 2004-09-03 at 10:19, Jim Cornette wrote:
> Ow Mun Heng wrote:
> > On Wed, 2004-07-21 at 09:57, Jim Cornette wrote:
> >
> >>I attempted to install FC3T1 on a USB drive using expert mode. It seems
> >>that all the proper files installed on the disk. The disk is a laptop
> >>disk contained inside a usb - ATA adapter and seems to work with the
> >>proper modeles loaded.
> >
> >
> > You can install it.. but as far as I can tell, you won't be able to boot
> > into it unless you tweak the initrd
> >
> >
> >>Are there any plans to get the module needed to mount USB disks loaded
> >>soon enough to be able to boot from these disks.
> >
> >
> >>My grub.conf file is in the attached file.
> >>
> >>There is a lot of interest in getting this concept to work.
> >
> >
> > This concept works. I've gotten it to work. As mentioned, you need to
> > get the initrd to load up the usb modules and you're all set.
> >
> >>Thanks,
> >>Jim
> >
> >
>
> Thanks for the response. It would be decent to have a ready-made setup
> that works without a lot of tweaking. But since this is a hobby, I'll
> learn in the process when attempting to get the usb drive to boot up.
>
> I did chroot to the usb installation and do some tinkering with the USB
> installation, but that was all that I tried so far. The chrooted
> environment was educational and I learned some processes that Linux has,
> so it wasn't a total loss.
>
Well.. if you need more info on how to set it up.. here's 2 sites you
can try.
http://benusa.com/linux/boot.htm
http://simonf.com/usb/
--
Ow Mun Heng
Fedora GNU/Linux Core 2 on D600 1.4Ghz CPU kernel 2.6.8.1.Aug.29
Neuromancer 10:56:44 up 2:47, 8 users, load average: 0.35, 0.21, 0.30
More information about the fedora-test-list
mailing list