DVD burning goosed?

Thu Mar 24 07:08:40 UTC 2005

Paul wrote:

>Hi,
>
>  
>
>>>growisofs comand:
>>>-----------------------
>>>/usr/bin/growisofs -Z /dev/hdf -use-the-force-luke=notray
>>>-use-the-force-luke=tty -use-the-force-luke=dao -dvd-compat -speed=6
>>>-overburn -gui -graft-points -volid Features -volset  -appid K3B THE CD
>>>KREATOR VERSION 0.11.12 (C) 2003 SEBASTIAN TRUEG AND THE K3B TEAM
>>>-publisher  -preparer K3b - Version 0.11.12 -sysid LINUX -volset-size 1
>>>-volset-seqno 1 -sort /tmp/kde-paul/k3b36KXbc.tmp -rational-rock
>>>-hide-list /tmp/kde-paul/k3b1tUicb.tmp -udf -untranslated-filenames
>>>-iso-level 2 -path-list /tmp/kde-paul/k3bjPtb1b.tmp 
>>>
>>>Is this likely to be a burner fault or is DVD burning currently a bit
>>>broken? I've not tried this using another kernel - it's been a while
>>>since I did any burning.
>>>      
>>>
>
>  
>
>>dmesg output?
>>    
>>
>
>Linux version 2.6.11-1.1185_FC4 (bhcompile at bugs.build.redhat.com) (gcc
>version 4.0.0 20050314 (Red Hat 4.0.0-0.34)) #1 Thu Mar 17 10:10:16 EST
>2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
> BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>On node 0 totalpages: 262128
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 225280 pages, LIFO batch:16
>  HighMem zone: 32752 pages, LIFO batch:7
>DMI 2.3 present.
>ACPI: RSDP (v000 Nvidia                                ) @ 0x000f6a70
>ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @
>0x3fff3000
>ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @
>0x3fff3040
>ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @
>0x3fff74c0
>ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000c) @
>0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
>Built 1 zonelists
>Kernel command line: ro root=LABEL=/ rhgb quiet
>Initializing CPU#0
>CPU 0 irqstacks, hard=c045a000 soft=c0459000
>PID hash table entries: 4096 (order: 12, 65536 bytes)
>Detected 1664.018 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1033028k/1048512k available (2528k kernel code, 14720k reserved,
>688k data, 184k init, 131008k highmem)
>Checking if this processor honours the WP bit even in supervisor mode...
>Ok.
>Calibrating delay loop... 3293.18 BogoMIPS (lpj=1646592)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
>CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000
>00000000 00000000 00000000
>CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000
>00000000 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>CPU: After all inits, caps: 0383f3f7 c1cbfbff 00000000 00000020 00000000
>00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU: AMD Sempron(tm)   2400+ stepping 01
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>ACPI: setting ELCR to 0200 (from 0e20)
>checking if image is initramfs... it is
>Freeing initrd memory: 978k freed
>NET: Registered protocol family 16
>PCI: PCI BIOS revision 2.10 entry at 0xfaab0, last bus=2
>PCI: Using configuration type 1
>mtrr: v2.0 (20020519)
>ACPI: Subsystem revision 20050211
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (00:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: nForce2 C1 Halt Disconnect fixup
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
>disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
>disabled.
>ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
>disabled.
>ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
>disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
>disabled.
>ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
>disabled.
>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
>disabled.
>ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
>ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 15 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>** PCI interrupts are no longer routed automatically.  If this
>** causes a device to stop working, it is probably because the
>** driver failed to call pci_enable_device().  As a temporary
>** workaround, the "pci=routeirq" argument restores the old
>** behavior.  If this argument makes the device work again,
>** please email the output of "lspci" to bjorn.helgaas at hp.com
>** so I can fix the driver.
>spurious 8259A interrupt: IRQ7.
>pnp: 00:00: ioport range 0x1000-0x107f could not be reserved
>pnp: 00:00: ioport range 0x1080-0x10ff has been reserved
>pnp: 00:00: ioport range 0x1400-0x147f has been reserved
>pnp: 00:00: ioport range 0x1480-0x14ff could not be reserved
>pnp: 00:00: ioport range 0x1800-0x187f has been reserved
>pnp: 00:00: ioport range 0x1880-0x18ff has been reserved
>pnp: 00:01: ioport range 0x1c00-0x1c3f has been reserved
>pnp: 00:01: ioport range 0x2000-0x203f has been reserved
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1111440465.424:0): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key E3A980FC930EFB38
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>Linux agpgart interface v0.100 (c) Dave Jones
>agpgart: Detected NVIDIA nForce2 chipset
>agpgart: Maximum main memory to use for agp memory: 941M
>agpgart: AGP aperture is 64M @ 0xd0000000
>[drm] Initialized drm 1.0.0 20040925
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing
>enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with
>idebus=xx
>NFORCE2: IDE controller at PCI slot 0000:00:09.0
>NFORCE2: chipset revision 162
>NFORCE2: not 100% native mode: will probe irqs later
>NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
>NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
>    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
>Probing IDE interface ide0...
>hda: HDS722580VLAT20, ATA DISK drive
>hdb: Maxtor 6Y120L0, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: LG DVD-ROM DRD-8160B, ATAPI CD/DVD-ROM drive
>hdd: COMBO-52X16C, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>HPT370A: IDE controller at PCI slot 0000:01:08.0
>ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 10 (level, low) -> IRQ 10
>HPT370A: chipset revision 4
>HPT37X: using 33MHz PCI clock
>HPT370A: 100% native mode on irq 10
>    ide2: BM-DMA at 0xb800-0xb807, BIOS settings: hde:pio, hdf:pio
>    ide3: BM-DMA at 0xb808-0xb80f, BIOS settings: hdg:DMA, hdh:DMA
>Probing IDE interface ide2...
>hde: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive
>hdf: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive
>ide2 at 0xa800-0xa807,0xac02 on irq 10
>Probing IDE interface ide3...
>hdg: Maxtor 6Y120L0, ATA DISK drive
>hdh: Maxtor 6Y120L0, ATA DISK drive
>ide3 at 0xb000-0xb007,0xb402 on irq 10
>Probing IDE interface ide4...
>Probing IDE interface ide5...
>hda: max request size: 1024KiB
>hda: Host Protected Area detected.
>	current capacity is 160834367 sectors (82347 MB)
>	native  capacity is 160836480 sectors (82348 MB)
>hda: Host Protected Area disabled.
>hda: 160836480 sectors (82348 MB) w/1794KiB Cache, CHS=16383/255/63,
>UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda3 hda4 < hda5 hda6 hda7 hda8 >
>hdb: max request size: 128KiB
>hdb: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63,
>UDMA(133)
>hdb: cache flushes supported
> hdb: hdb1 hdb2
>hdg: max request size: 128KiB
>hdg: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63,
>UDMA(100)
>hdg: cache flushes supported
> hdg: hdg1 hdg2
>hdh: max request size: 128KiB
>hdh: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63,
>UDMA(100)
>hdh: cache flushes supported
> hdh: hdh1
>hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>hdd: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>hdf: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
>ide-floppy driver 0.99.newide
>hde: No disk in drive
>hde: 0kB, 0/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard on isa0060/serio0
>input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
>md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP: routing cache hash table of 2048 buckets, 64Kbytes
>TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1835008 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI wakeup devices: 
>HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1 
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 184k freed
>SCSI subsystem initialized
>ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI interrupt 0000:01:09.0[A] -> GSI 11 (level, low) -> IRQ 11
>ahc_pci:1:9:0: Host Adapter Bios disabled.  Using default SCSI device
>parameters
>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
>        <Adaptec 2902/04/10/15/20C/30C SCSI adapter>
>        aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs
>
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  3 users, 5 roles, 589 types, 61 bools
>security:  54 classes, 71803 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev hda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses
>genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), not configured for
>labeling
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for
>labeling
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses
>genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>8139too Fast Ethernet driver 0.9.27
>ACPI: PCI interrupt 0000:01:0b.0[A] -> GSI 10 (level, low) -> IRQ 10
>eth0: RealTek RTL8139 at 0xc000, 00:0f:ea:54:48:15, IRQ 10
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
>ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 5 (level, low) -> IRQ 5
>ACPI: PCI Interrupt Link [LACI] enabled at IRQ 11
>ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>intel8x0_measure_ac97_clock: measured 49300 usecs
>intel8x0: clocking to 47486
>gameport: pci0000:01:07.1 speed 877 kHz
>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2000
>Linux video capture interface: v1.00
>bttv: driver version 0.9.15 loaded
>bttv: using 8 buffers with 2080k (520 pages) each for capture
>bttv: Bt8xx card found (0).
>ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 9
>PCI: setting IRQ 9 as level-triggered
>ACPI: PCI interrupt 0000:01:0a.0[A] -> GSI 9 (level, low) -> IRQ 9
>bttv0: Bt878 (rev 17) at 0000:01:0a.0, irq: 9, latency: 32, mmio:
>0xd8000000
>bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
>bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
>bttv0: gpio: en=00000000, out=00000000 in=00fffbff [init]
>bttv0: i2c: checking for MSP34xx @ 0x80... found
>bttv0: pinnacle/mt: id=2 info="PAL+SECAM / stereo" radio=yes
>bttv0: using tuner=33
>bttv0: i2c: checking for MSP34xx @ 0x80... found
>msp34xx: init: chip=MSP3410G-B11 +nicam +simple +simpler +radio
>mode=simple
>msp3410: daemon started
>bttv0: i2c: checking for TDA9875 @ 0xb0... not found
>bttv0: i2c: checking for TDA7432 @ 0x8a... not found
>tda9885/6/7: chip found @ 0x96
>tuner: chip found at addr 0xc0 i2c-bus bt878 #0 [sw]
>tuner: type set to 33 (MT20xx universal) by bt878 #0 [sw]
>tuner: microtune: companycode=3cbf part=42 rev=2f
>tuner: microtune MT2050 found, OK
>bttv0: registered device video0
>bttv0: registered device vbi0
>bttv0: registered device radio0
>bttv0: PLL: 28636363 => 35468950 .. ok
>bt878: AUDIO driver version 0.0.0 loaded
>bt878: Bt878 AUDIO function found (0).
>ACPI: PCI interrupt 0000:01:0a.1[A] -> GSI 9 (level, low) -> IRQ 9
>bt878(0): Bt878 (rev 17) at 01:0a.1, irq: 9, latency: 32, memory:
>0xd8001000
>ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 10
>ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 10 (level, low) -> IRQ 10
>ehci_hcd 0000:00:02.2: EHCI Host Controller
>PCI: Setting latency timer of device 0000:00:02.2 to 64
>ehci_hcd 0000:00:02.2: irq 10, pci mem 0xdd004000
>ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
>PCI: cache line size of 64 is not supported by device 0000:00:02.2
>ehci_hcd 0000:00:02.2: park 0
>ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec
>2004
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 9
>ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 9 (level, low) -> IRQ 9
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ohci_hcd 0000:00:02.0: irq 9, pci mem 0xdd002000
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 5
>ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 5 (level, low) -> IRQ 5
>ohci_hcd 0000:00:02.1: OHCI Host Controller
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>ohci_hcd 0000:00:02.1: irq 5, pci mem 0xdd003000
>ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>ieee1394: Initialized config rom entry `ip1394'
>ohci1394: $Rev: 1223 $ Ben Collins <bcollins at debian.org>
>ACPI: PCI interrupt 0000:01:07.2[B] -> GSI 10 (level, low) -> IRQ 10
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]
>MMIO=[dc004000-dc0047ff]  Max Packet=[2048]
>usb 3-1: new full speed USB device using ohci_hcd and address 2
>usb 3-2: new full speed USB device using ohci_hcd and address 3
>usb 3-2: device not accepting address 3, error -110
>ACPI: Power Button (FF) [PWRF]
>ibm_acpi: ec object not found
>usb 3-2: new full speed USB device using ohci_hcd and address 4
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>ieee1394: Host added: ID:BUS[0-01:1023]  GUID[00023c00210900fa]
>cdrom: open failed.
>hde: No disk in drive
>usb 3-2: device not accepting address 4, error -110
>usb 3-2: new full speed USB device using ohci_hcd and address 5
>cdrom: open failed.
>usb 3-2: device descriptor read/64, error -110
>cdrom: open failed.
>usb 3-2: device descriptor read/64, error -110
>usb 3-2: new full speed USB device using ohci_hcd and address 6
>usb 3-2: device descriptor read/64, error -110
>usb 3-2: device descriptor read/64, error -110
>usb 3-3: new full speed USB device using ohci_hcd and address 7
>EXT3 FS on hda1, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev hda5, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hdb1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev hdb1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hdb2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev hdb2, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hdg1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev hdg1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hdg2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev hdg2, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hdh1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev hdh1, type ext3), uses xattr
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c03e9640(lo)
>IPv6 over IPv4 tunneling driver
>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0
>alt 0 proto 2 vid 0x03F0 pid 0x3004
>usbcore: registered new driver usblp
>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>Initializing USB Mass Storage driver...
>scsi1 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 7
>usb-storage: waiting for device to settle before scanning
>Adding 294904k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1
>Adding 1566328k swap on /dev/hda3.  Priority:-2 extents:1
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses
>genfs_contexts
>
>TTFN
>
>Paul
>  
>
is this the output after the burning has failed?