[Date Prev][Date Next] [Thread Prev][Thread Next]
[Thread Index]
[Date Index]
[Author Index]
cannot connect with newer 205 kernel :(
- From: Antonio Olivares <olivares14031 yahoo com>
- To: fedora-test-list redhat com
- Subject: cannot connect with newer 205 kernel :(
- Date: Fri, 1 Aug 2008 11:49:21 -0700 (PDT)
Dear all,
I have gotten a Wireless USB modem that works with Linux.
http://www.mycricket.com/broadband/
I have not succeeded connecting with 2.6.27 rc kernels, 0-186 so I removed it, and it had bugs (kernel oops and there is a bugzilla). While the new kernel there appears not to be bugs, it boots and all, but when I try to connect, I am unsuccessful. I have to use the older 2.6.26rc kernel
[olivares localhost ~]$ uname -a
Linux localhost.localdomain 2.6.26-0.44.rc4.git2.fc10.i686 #1 SMP Thu May 29 13:44:38 EDT 2008 i686 i686 i386 GNU/Linux
[olivares localhost ~]$
Connection bombs out with an error 1 and I have created a file with the necessary information. I use wvdial to connect and the device is /dev/ttyACM0
[olivares localhost ~]$ cat /etc/wvdial.conf
[Dialer Defaults]
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = USB Modem
Phone = #777
ISDN = 0
Username = MYUSERNAME
Init1 = ATZ
Password = MYPASSWORD.
Modem = /dev/ttyACM0
Baud = 460800
Carrier Check = no
Stupid Mode = yes
I have successfully put in all updates with 2.6.26rc kernels under rawhide. With the new 2.6.27rc kernels, the errors always show up :(
Should you need further information, please let me know. I have attached the erros in the file.
Thanks in advance,
Antonio
[root localhost ~]# wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
CONNECT
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Fri Aug 1 13:25:56 2008
--> Pid of pppd: 3390
--> pppd: 0[1d]y �&y
--> Disconnecting at Fri Aug 1 13:25:57 2008
--> The PPP daemon has died: Fatal pppd error (exit code = 1)
--> man pppd explains pppd error codes in more detail.
--> Try again and look into /var/log/messages and the wvdial and pppd man pages for more information.
--> Auto Reconnect will be attempted in 5 seconds
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
CONNECT
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Fri Aug 1 13:26:05 2008
--> Pid of pppd: 3408
--> pppd: 0[1d]y �&y
--> Disconnecting at Fri Aug 1 13:26:05 2008
--> The PPP daemon has died: Fatal pppd error (exit code = 1)
--> man pppd explains pppd error codes in more detail.
--> Try again and look into /var/log/messages and the wvdial and pppd man pages for more information.
--> Auto Reconnect will be attempted in 10 seconds
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
CONNECT
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Fri Aug 1 13:26:18 2008
--> Pid of pppd: 3474
--> pppd: 0[1d]y �&y
--> Disconnecting at Fri Aug 1 13:26:18 2008
--> The PPP daemon has died: Fatal pppd error (exit code = 1)
--> man pppd explains pppd error codes in more detail.
--> Try again and look into /var/log/messages and the wvdial and pppd man pages for more information.
--> Auto Reconnect will be attempted in 20 seconds
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
^CCaught signal 2: Attempting to exit gracefully...
--> Disconnecting at Fri Aug 1 13:26:43 2008
[root localhost ~]#
ALSA sound/pci/hda/hda_intel.c:1394: azx_pcm_prepare: bufsize=0x1800, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
r8169: eth1: link down
ADDRCONF(NETDEV_UP): eth1: link is not ready
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
[drm] Initialized i915 1.6.0 20060119 on minor 0
SELinux: Context system_u:object_r:user_gconf_home_t:s0 is not valid (left unmapped).
SELinux: Context unconfined_u:object_r:user_gconf_home_t:s0 is not valid (left unmapped).
ALSA sound/pci/hda/hda_intel.c:1394: azx_pcm_prepare: bufsize=0x10000, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_intel.c:1394: azx_pcm_prepare: bufsize=0x10000, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_intel.c:1394: azx_pcm_prepare: bufsize=0x10000, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x9, stream=0x1, channel=0, format=0x4011
ALSA sound/pci/hda/hda_intel.c:1394: azx_pcm_prepare: bufsize=0x10000, format=0x4011
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x9, stream=0x1, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x9
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x9
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
SELinux: Context system_u:object_r:user_gnome_home_t:s0 is not valid (left unmapped).
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x9
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
ALSA sound/pci/hda/hda_intel.c:1394: azx_pcm_prepare: bufsize=0x10000, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_intel.c:1394: azx_pcm_prepare: bufsize=0x10000, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_intel.c:1394: azx_pcm_prepare: bufsize=0x10000, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 32, phase 16, 23 us
PPP generic driver version 2.4.2
uhci_hcd 0000:00:1d.2: release dev 2 ep81-INT, period 32, phase 16, 23 us
uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 32, phase 16, 23 us
uhci_hcd 0000:00:1d.2: release dev 2 ep81-INT, period 32, phase 16, 23 us
uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 32, phase 16, 23 us
uhci_hcd 0000:00:1d.2: release dev 2 ep81-INT, period 32, phase 16, 23 us
uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 32, phase 16, 23 us
[olivares localhost ~]$ su -
Password:
[root localhost ~]# tail -f /var/log/messages
Aug 1 13:25:57 localhost kernel: PPP generic driver version 2.4.2
Aug 1 13:25:57 localhost pppd[3390]: pppd 2.4.4 started by root, uid 0
Aug 1 13:25:57 localhost pppd[3390]: Couldn't set tty to PPP discipline: Invalid argument
Aug 1 13:25:57 localhost pppd[3390]: Exit.
Aug 1 13:26:05 localhost pppd[3408]: pppd 2.4.4 started by root, uid 0
Aug 1 13:26:05 localhost pppd[3408]: Couldn't set tty to PPP discipline: Invalid argument
Aug 1 13:26:05 localhost pppd[3408]: Exit.
Aug 1 13:26:18 localhost pppd[3474]: pppd 2.4.4 started by root, uid 0
Aug 1 13:26:18 localhost pppd[3474]: Couldn't set tty to PPP discipline: Invalid argument
Aug 1 13:26:18 localhost pppd[3474]: Exit.
^C
[root localhost ~]# uname -a
Linux localhost.localdomain 2.6.27-0.205.rc1.git2.fc10.i686 #1 SMP Thu Jul 31 16:12:27 EDT 2008 i686 i686 i386 GNU/Linux
from man pppd error 1 is the following:
1 An immediately fatal error of some kind occurred, such
as an essential system call failing, or running out of
virtual memory.
[root localhost ~]# dmesg | grep 'usb'
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
drivers/usb/core/inode.c: creating file 'devices'
drivers/usb/core/inode.c: creating file '001'
usb usb1: default language 0x0409
usb usb1: uevent
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: uevent
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: no power switching (usb 1.0)
drivers/usb/core/inode.c: creating file '001'
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27-0.205.rc1.git2.fc10.i686 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
drivers/usb/core/inode.c: creating file '002'
usb usb2: default language 0x0409
usb usb2: uevent
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: uevent
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: no power switching (usb 1.0)
drivers/usb/core/inode.c: creating file '001'
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27-0.205.rc1.git2.fc10.i686 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
drivers/usb/core/inode.c: creating file '003'
usb usb3: default language 0x0409
usb usb3: uevent
usb usb3: usb_probe_device
usb usb3: configuration #1 chosen from 1 choice
usb usb3: adding 3-0:1.0 (config #1, interface 0)
usb 3-0:1.0: uevent
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: no power switching (usb 1.0)
drivers/usb/core/inode.c: creating file '001'
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27-0.205.rc1.git2.fc10.i686 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
drivers/usb/core/inode.c: creating file '004'
usb usb4: default language 0x0409
usb usb4: uevent
usb usb4: usb_probe_device
usb usb4: configuration #1 chosen from 1 choice
usb usb4: adding 4-0:1.0 (config #1, interface 0)
usb 4-0:1.0: uevent
hub 4-0:1.0: usb_probe_interface
hub 4-0:1.0: usb_probe_interface - got id
hub 4-0:1.0: no power switching (usb 1.0)
drivers/usb/core/inode.c: creating file '001'
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.27-0.205.rc1.git2.fc10.i686 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
drivers/usb/core/inode.c: creating file '005'
usb usb5: default language 0x0409
usb usb5: uevent
usb usb5: usb_probe_device
usb usb5: configuration #1 chosen from 1 choice
usb usb5: adding 5-0:1.0 (config #1, interface 0)
usb 5-0:1.0: uevent
hub 5-0:1.0: usb_probe_interface
hub 5-0:1.0: usb_probe_interface - got id
hub 5-0:1.0: no power switching (usb 1.0)
usb 4-1: new full speed USB device using uhci_hcd and address 2
drivers/usb/core/inode.c: creating file '001'
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.27-0.205.rc1.git2.fc10.i686 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb 4-1: skipped 4 descriptors after interface
usb 4-1: default language 0x0409
usb 4-1: uevent
usb 4-1: usb_probe_device
usb 4-1: configuration #1 chosen from 1 choice
usb 4-1: adding 4-1:1.0 (config #1, interface 0)
usb 4-1:1.0: uevent
usb 4-1: adding 4-1:1.1 (config #1, interface 1)
usb 4-1:1.1: uevent
usb 4-1: adding 4-1:1.2 (config #1, interface 2)
usb 4-1:1.2: uevent
drivers/usb/core/inode.c: creating file '002'
usb 4-1: New USB device found, idVendor=0d08, idProduct=0300
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: UTStarcom UM100
usb 4-1: Manufacturer: UTStarcom, Incorporated
usb usb2: suspend_rh (auto-stop)
usb usb3: suspend_rh (auto-stop)
usb usb5: suspend_rh (auto-stop)
usb usb1: bus auto-suspend
usb usb2: bus auto-suspend
usb usb2: suspend_rh
usb usb3: bus auto-suspend
usb usb3: suspend_rh
usb usb5: bus auto-suspend
usb usb5: suspend_rh
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
usb usb2: uevent
usb 2-0:1.0: uevent
usb usb3: uevent
usb 3-0:1.0: uevent
usb usb4: uevent
usb 4-0:1.0: uevent
usb 4-1: uevent
usb 4-1:1.0: uevent
usb 4-1:1.1: uevent
usb 4-1:1.2: uevent
usb usb5: uevent
usb 5-0:1.0: uevent
usb usb1: uevent
usb 1-0:1.0: uevent
cdc_acm 4-1:1.0: usb_probe_interface
cdc_acm 4-1:1.0: usb_probe_interface - got id
usbcore: registered new interface driver cdc_acm
[Date Prev][Date Next] [Thread Prev][Thread Next]
[Thread Index]
[Date Index]
[Author Index]