On Tue, 2 Dec 2003, norbert wrote:
K12LTSP Server V3.1.2 with all current updates
Two 10/100 NICs
SMC2-1211TX connected to a cable-modem for internet (DHCP) - eth1
RTL-8139 local lan (Static) - eth0
no firewall
route with gateway via eth0
Problem:
When I let kudzu & neat configure the cards neither work.
Actions
Restart the server without kudzu
Use neat to define the two NIC cards
Activate only the SMC2 for internet
Save & exit
Internet works !
manually configure the RTL8139 - ifconfig eth0 192.168.0.130 up
both work
Restart the network - service network restart
Neither work - no ping, no internet !!!!!
Yes I know you said my first mistake was playing with the network, so I
re-installed everything from scratch but I did run apt-get update &
apt-get upgrade :-(
Prior to having the updates/upgrade the system worked but since then
NOTHING WORKS !!!!!!
Norbert,
first things first: make your eth1 the dhcp interface to the
world, and have eth0 as the internal network gateway. this is actually
important, because the dhp setup will try to put all the dns and default
gateway info for the server. you don't have to mess with cards or even
files - if neccessary just change the assignment in /etc/modules.conf.
after you do that, reboot and see if all is forgiven ;-)
julius
_______________________________________________
K12OSN mailing list
K12OSN redhat com
https://www.redhat.com/mailman/listinfo/k12osn
For more info see <http://www.k12os.org>