[Date Prev][Date Next] [Thread Prev][Thread Next] [Thread Index] [Date Index] [Author Index]

Re: [K12OSN] Need help integrating LTSP Server into school network

From: "Mel Wade" <mel melwade com>
To: "Support list for open source software in schools." <k12osn redhat com>
Subject: Re: [K12OSN] Need help integrating LTSP Server into school network
Date: Tue, 29 Jan 2008 08:11:28 -0800

Mine here is set up with 10.0.1.x network for the terminals, and the other NIC connnects to the school network with a static address in the 192.168.0.x range. I set it up with a static address as we have part of our address pool reserved for things like servers, print servers, etc.
Hope this helps you, and good luck with things.

This is an important point. K12LTSP uses 192.168.0.x subnet. Check what IP Addresses the school's DHCP server is giving out. If it is the same subnet as the K12LTSP, change your K12LSTP DHCP server to a different address schema. I would use a 10.0.0.x.
--
Mel Wade
"The real problem is not whether machines think but whether men do." - BF Skinner
http://www.melwade.com

References:
- [K12OSN] Need help integrating LTSP Server into school network
  - From: Devry Lin
- Re: [K12OSN] Need help integrating LTSP Server into school network
  - From: pstech

[Date Prev][Date Next] [Thread Prev][Thread Next] [Thread Index] [Date Index] [Author Index]