2003-March Archive by Thread
Messages are ordered newest-to-oldest in this index. The newest
threads will be at the top of this page, the oldest will be at the bottom.
Within a single thread, the first mail note is the START of the
thread; the notes following that are in the chronological order of
when they were received. So globally, newest messages are at the top,
but within a thread, the oldest (the start of the thread) is at the
top.
If you think about it, it is confusing. Just go with the flow and everything will be all right.
- Kickstart http parameters,
Daniel Nilsson (GIS)
- ssh keys,
Jesse
- %post script to get my files off CD.,
Lloyd Thompson
- Shrinking the kickstart image,
Matt Fahrner
- which variables or macros can I use in %post,
Thomas Baumann
- How to specify hostname while kickstart,
Thomas Baumann
- Problem with RH8.0 + kickstart + dhcp + E1000 ethernet card,
Andrew Williams
- Bootloader stalling during install,
Sean P. Kane
- "second stage of the install... does not match the boot disk",
Aaron Bennett
- NFS ISO installs,
Bodle, Donald E
- Help needed adding modules to the boot image,
Rebecca . R . Hepper
- generating multiple kickstart files,
Robin Mordasiewicz
- Re: generating multiple kickstart files,
Jason L Tibbitts III
- <Possible follow-ups>
- RE: generating multiple kickstart files,
Johnston, Christopher (IDS DM&DS)
- RE: generating multiple kickstart files,
Skahan, Vince
- RE: generating multiple kickstart files,
Lynn, Michael (IDS DM&DS)
- RE: generating multiple kickstart files,
Johnston, Christopher (IDS DM&DS)
- RE: generating multiple kickstart files,
Johnston, Christopher (IDS DM&DS)
- RE: generating multiple kickstart files,
Johnston, Christopher (IDS DM&DS)
- Not writing /root/anaconda-ks.cfg,
Sean P. Kane
- emailing from %post, revisited,
James_Martin
- up2date from %post,
James_Martin
- help with kick start installation,
HEMANT BAANDAL
- creating raw devices,
Johnston, Christopher (IDS DM&DS)
- e-mailing from post,
James_Martin
- Re: e-mailing from post,
Mark D. Nagel
- Re: e-mailing from post,
Anthony Joseph Seward
- Re: e-mailing from post,
John
- <Possible follow-ups>
- RE: e-mailing from post,
Johnston, Christopher (IDS DM&DS)
- RE: e-mailing from post,
Lynn, Michael (IDS DM&DS)
- RE: e-mailing from post,
Lynn, Michael (IDS DM&DS)
- RE: e-mailing from post,
James_Martin
- RE: e-mailing from post,
Smith, Eric V.
- logging of the %post section,
James_Martin
- Dealing with rpmsave files,
Sean P. Kane
- sfdisk in %pre,
James_Martin
- remote status,
Cheryl L. Southard
- RE: mailing list archives?,
Sean P. Kane
- RE: grub config,
Sean P. Kane
- kickstart custom CD/ firewire CD install,
Stephen Mah
- %pre: pwd returns "no such directory",
Sean P. Kane
- IPChains / IPTables installed without being in Package list inks .cfg,
Lynn, Michael (DCS)
- Multiple %post and mailing list archives?,
Sean P. Kane
- NFS Mounted where?,
Sean P. Kane
- variables in kickstart??,
Lambert, Eric
- variables in ks.cfg?,
Lambert, Eric
- how to manage kickstart file,
Eric . Doutreleau
- kickstart ipchains and NIS on RH7.3,
Eric . Doutreleau
- iptables and kickstart,
Scott Melnyk
- Kickstart and modules.conf,
Karri Puumanen
- Peter Zapletal/CEN/HQ/PKB/SK is out of the office.,
Peter Zapletal
- Flashing NICs,
John
- Updating Installation Repository,
Jason P Holland
- problem %post script,
Pierrot
- Applying updates during kickstart-installation,
Daniel Nilsson (GIS)
- AW: gateway,
Klier Rainer
- gateway,
Klier Rainer
- cp tarball from CD2?,
Stephen Mah
- %pre,
Klier Rainer
- <Possible follow-ups>
- Re: %pre,
Janne Rantanen
- FWD: about the RULE distribution analyzer,
M. Fioretti
- RPMs not finding dependancies,
Matt Fahrner
- Disabling a dos boot,
moreta
- ANNOUNCE: the RULE distribution analyzer is online,
M. Fioretti
- Multiple %post,
Stephen Mah
- rh8 custom kernel on kickstart cd,
Andrew Thomson
- how can I view output from %post,
Lambert, Eric
- Re: how can I view output from %post,
John
- Re: how can I view output from %post,
Timothy E. Miller
- Re: how can I view output from %post,
Philip Rowlands
- <Possible follow-ups>
- Re: how can I view output from %post,
james . oden
- Re: how can I view output from %post,
Rebecca . R . Hepper
- RE: how can I view output from %post,
Lambert, Eric
- RE: how can I view output from %post,
Rebecca . R . Hepper
- RE: how can I view output from %post,
Lambert, Eric
- RE: how can I view output from %post,
Lambert, Eric
- Bad interaction between PXE and grub?,
Phil Radden
- Hands off install from CDROM,
T.D. Brace
- when is it OK to eject the boot floppy,
Lambert, Eric
- %post assistance in RH7.3,
Lambert, Eric
- passing modules options on boot from floppy,
Gerardo KickStart