[Date Prev][Date Next] [Thread Prev][Thread Next]
[Thread Index]
[Date Index]
[Author Index]
RE: pump told us: No DHCP reply received
- From: "Shabazian, Chip" <Chip Shabazian bankofamerica com>
- To: Discussion list about Kickstart <kickstart-list redhat com>
- Subject: RE: pump told us: No DHCP reply received
- Date: Mon, 27 Nov 2006 12:44:58 -0800
RHEL 3 or 4? RHEL 4 enumerates the bus in a different
order than RHEL 3, so if there are any NIC's on expansion cards, this could
cause problems.
What happens if you pass the IP information at the boot:
prompt?
Chip
Hi,
First off, I’d like to thank Chip, Mike and Colin
for
their help earlier.
I was asked to postpone this project for
about a week
but eventually I experimented with different setups
and
managed to create a kickstart environment that
utilizes PXE
boot.
Well, now I’m getting this strange error message after
the
client boots off the PXE/DHCP server:
* running dhcp for
eth0
* pump told us: No DHCP reply received
* eth0 isn’t a
wireless adapter
It looks like the DHCP server can’t assign an
ip.
This error is a little confusing because the
kickstart
client is definitely getting an IP from the DHCP
server which
allows
it to boot into PXE. After initially getting an
IP
to boot into PXE, anaconda begins to install the
driver
modules.
What I then see is various drivers loading like the
megaraid
SCSI, megaraid SAS and NIC drivers.
The installation just halts
when it asks me for the
networking info. Here’s what I
tried:
I tried to do a kick off of a Dell 1950 and 2950.
I
tried to boot off of both NICs to no avail
I connected a crossover
cable from the kickstart
client directly to the DHCP/PXE server.
I get
the same results. An initial ip is assigned the
first time for a PXE
boot but doesn’t subsequently
get one during the anaconda install
phase.
Any suggestions would be VERY helpful. I can’t
find
any useful info about this error message on
google.
Thanks in advance,
anthony
Everyone is raving about the
all-new Yahoo! Mail beta.
[Date Prev][Date Next] [Thread Prev][Thread Next]
[Thread Index]
[Date Index]
[Author Index]