2009-July Archive by Thread
Messages are ordered newest-to-oldest in this index. The newest
threads will be at the top of this page, the oldest will be at the bottom.
Within a single thread, the first mail note is the START of the
thread; the notes following that are in the chronological order of
when they were received. So globally, newest messages are at the top,
but within a thread, the oldest (the start of the thread) is at the
top.
If you think about it, it is confusing. Just go with the flow and everything will be all right.
- [libvirt] [PATCH 0/5] Various logging cleanups,
Amy Griffis
- [libvirt] [PATCH] Don't clobber ID when redefining dom in xm driver,
Cole Robinson
- [libvirt] PATCH: Add name uniqueness checking to LXC driver,
Daniel P. Berrange
- [libvirt] PATCH: Fix cleanup of transient VMs,
Daniel P. Berrange
- [libvirt] PATCH: Fix startup of LXC vms without cgroups,
Daniel P. Berrange
- [libvirt] PATCH: Fix crash attempting to shutdown inactive QEMU vm,
Daniel P. Berrange
- [libvirt] [PATCH] Fix PCIe FLR detection,
Mark McLoughlin
- [libvirt] [PATCH] Fix latent buffer overflow in qemudOpenMonitorUnix.,
Chris Lalancette
- [libvirt] [PATCH] Remove ATTRIBUTE_UNUSED from flags to qemudDomainMigratePerform.,
Chris Lalancette
- [libvirt] [PATCH] Add a comment about setting errors after qemudStartVMDaemon().,
Chris Lalancette
- [libvirt] [PATCH] Fix an erroneous debug error to KVM; it should read QEMU/KVM.,
Chris Lalancette
- [libvirt] [PATCH] Remove a stray semicolon in qemudDomainMigratePrepare2.,
Chris Lalancette
- [libvirt] [PATCH] Split virDomainMigrate into functions.,
Chris Lalancette
- [libvirt] [PATCH] Convert a few stray users of free() in libvirt.c to VIR_FREE().,
Chris Lalancette
- [libvirt] [PATCH] Use virGetHostname instead of gethostname.,
Chris Lalancette
- [libvirt] [PATCH] Allow libvirtd to RPC to external libvirtd.,
Chris Lalancette
- [libvirt] [PATCH] Fix up a minor indentation issue with virDomainMigratePrepare.,
Chris Lalancette
- [libvirt] [PATCH] Fix virCapabilitiesDefaultGuestMachine documentation.,
Chris Lalancette
- [libvirt] [PATCH] Fix up a silly typo in apibuild.py.,
Chris Lalancette
- [libvirt] [PATCH] Workaround for broken GCC in Debian Etch,
Maximilian Wilhelm
- [libvirt] [PATCH] Add some automatic dependency checks for configure to enable/disable {ESX, UML, LXC, Xen-Inotify},
Maximilian Wilhelm
- [libvirt] [PATCH] BZ481602: Attempted to reproduce the bug led to issues around type mapping. They are resolved, and the code from the bug runs aginst hte test driver. Once published I will have the submitter reproduce it.,
Bryan Kearney
- [libvirt] PATCH: Re-enable ESX driver on Mingw32,
Daniel P. Berrange
- [libvirt] PATCH: Disable IPv6 on virtual network bridges,
Daniel P. Berrange
- [libvirt] Fix -Werror build error regarding to '#ifdef IFF_VNET_HDR',
Maximilian Wilhelm
- [libvirt] [PATCH] Drop the leading lib from libvirt. Based on testing by thomas@scripty.at this is a better way to load the libarary,
Bryan Kearney
- [libvirt] PATCH: Fix permissions problem starting QEMU,
Daniel P. Berrange
- [libvirt] PATCH: Always start dnsmasq to provide DNS,
Daniel P. Berrange
- [libvirt] VMware ESX: Scheduler documentation and cleanup,
Matthias Bolte
- [libvirt] PATCH: Fix RPM upgrades to create qemu user,
Daniel P. Berrange
- [libvirt] vcpupin broken towards Xen using xend,
Henrik Persson
- [libvirt] VM creation failed : Permission denied : bind(unix:/var/run/libvirt/qemu//VM.monitor),
Pierre-Gilles Mialon
- [libvirt] Feature request? Console tunnelling..,
r-c rocketmail com
- [libvirt] [PATCH] Modify the java bindings html page to reflect the new repositories, JNA, and maven access,
Bryan Kearney
- [libvirt] ANNOUNCE: Java Libvirt bindings version 0.3.0,
Bryan Kearney
- [libvirt] [PATCH] Remove MAX_TAP_ID, take 3,
Aron Griffis
- Re: [libvirt] [PATCH] Remove MAX_TAP_ID, take 3,
Daniel Veillard
- Re: [libvirt] [PATCH] Remove MAX_TAP_ID, take 3,
Daniel Veillard
- Re: [libvirt] [PATCH] Remove MAX_TAP_ID, take 3,
Matthias Bolte
- Re: [libvirt] [PATCH] Remove MAX_TAP_ID, take 3,
Aron Griffis
- Re: [libvirt] [PATCH] Remove MAX_TAP_ID, take 3,
Daniel Veillard
- Re: [libvirt] [PATCH] Remove MAX_TAP_ID, take 3,
Mark McLoughlin
- Re: [libvirt] [PATCH] Remove MAX_TAP_ID, take 3,
Matthias Bolte
- Re: [libvirt] [PATCH] Remove MAX_TAP_ID, take 3,
Daniel Veillard
- Re: [libvirt] [PATCH] Remove MAX_TAP_ID, take 3,
Aron Griffis
- [libvirt] [PATCH 1/3] Move ldconfig calls to libvirt-client %post/%postun,
Mark McLoughlin
- [libvirt] [PATCH] Fix trailing whitespace in NEWS,
Mark McLoughlin
- [libvirt] [PATCH] Remove MAX_TAP_ID, take 2,
Aron Griffis
- [libvirt] [PATCH] Remove MAX_TAP_ID,
Aron Griffis
- [libvirt] ANNOUNCE: New release virtinst 0.500.0,
Cole Robinson
- [libvirt] ANNOUNCE: New release virt-manager 0.8.0,
Cole Robinson
- [libvirt] Debug the username/passwords,
Bryan Kearney
- [libvirt] [PATCH 00/14] Clean up spec files mess,
Mark McLoughlin
- [libvirt] [PATCH 11/14] Use a %postun -p for one line scriptlet,
Mark McLoughlin
- [libvirt] [PATCH 05/14] Enable netcf by default,
Mark McLoughlin
- [libvirt] [PATCH 12/14] Remove executable perms from /etc/sysconfig/libvirtd,
Mark McLoughlin
- [libvirt] [PATCH 10/14] Convert NEWS to UTF-8,
Mark McLoughlin
- [libvirt] [PATCH 07/14] Fix some unowned directories,
Mark McLoughlin
- [libvirt] [PATCH 03/14] Make vbox support configurable,
Mark McLoughlin
- [libvirt] [PATCH 04/14] Default to with_polkit,
Mark McLoughlin
- [libvirt] [PATCH 13/14] Add Requires: libselinux,
Mark McLoughlin
- [libvirt] [PATCH 14/14] Remove the spec files,
Mark McLoughlin
- [libvirt] [PATCH 08/14] Remove python cruft from python/tests,
Mark McLoughlin
- [libvirt] [PATCH 09/14] Don't explicitly require libxml2,
Mark McLoughlin
- [libvirt] [PATCH 01/14] BuildRequires libcap-ng-devel not capng-devel,
Mark McLoughlin
- [libvirt] [PATCH 02/14] Build with --without-capng if capng is disabled,
Mark McLoughlin
- [libvirt] [PATCH 06/14] Kill qemu BuildRequires,
Mark McLoughlin
- Re: [libvirt] [PATCH 00/14] Clean up spec files mess,
Cole Robinson
- Re: [libvirt] [PATCH 00/14] Clean up spec files mess,
Daniel Veillard
- Re: [libvirt] [PATCH 00/14] Clean up spec files mess,
Daniel Veillard
- [libvirt] [PATCH 15/14] No need to build require both python-devel and python,
Mark McLoughlin
- [libvirt] PATCH: Fix remote domain events deadlock,
Daniel P. Berrange
- [libvirt] [PATCH] qemu: fix monitor socket reconnection,
Ryota Ozaki
- [libvirt] [PATCH] qemu: fix missing ifname in qemu argument,
Ryota Ozaki
- [libvirt] XenStore fix,
Jonas Eriksson
- [libvirt] [RFC] secrets API, was Re: [PATCH 0/9] Add support for (qcow*) volume encryption,
Miloslav Trmac
- [libvirt] Pre-0.7.0 release for testing,
Daniel Veillard
- [libvirt] VMware support and Server 2.0.1,
Timo Makinen
[libvirt] [PATCH] Kernel command line support for UML,
Ron Yorston
[libvirt] PATCH: Implement vCPU cpuTime + cpu fields for QEMU,
Daniel P. Berrange
[libvirt] VMware ESX: Accept VI API version 4.0,
Matthias Bolte
[libvirt] VMware ESX: Allow leading dots in VMX config entry names,
Matthias Bolte
[libvirt] VMware ESX: Add no_verify query parameter,
Matthias Bolte
[libvirt] VMware ESX: Fix memory leaks in esxDomainDumpXML(),
Matthias Bolte
[libvirt] Unable to get libvirt working with KVM using direct kernel boot.,
Tiit Kaeeli
[libvirt] VMware support and libcurl on rhel-u1,
Shahar Klein
- Re: [libvirt] VMware support and libcurl on rhel-u1,
Matthias Bolte
- Message not available
- Message not available
- Re: [libvirt] VMware support and libcurl on rhel-u1,
Shahar Klein
- Re: [libvirt] VMware support and libcurl on rhel-u1,
Tom Hughes
- Re: [libvirt] VMware support and libcurl on rhel-u1,
Matthias Bolte
- Re: [libvirt] VMware support and libcurl on rhel-u1,
Tom Hughes
- Re: [libvirt] VMware support and libcurl on rhel-u1,
Matthias Bolte
- Re: [libvirt] VMware support and libcurl on rhel-u1,
Shahar Klein
- Re: [libvirt] VMware support and libcurl on rhel-u1,
Tom Hughes
- Re: [libvirt] VMware support and libcurl on rhel-u1,
Matthias Bolte
- Re: [libvirt] VMware support and libcurl on rhel-u1,
Tom Hughes
- Re: [libvirt] VMware support and libcurl on rhel-u1,
Shahar Klein
- Message not available
- Message not available
- Message not available
- Re: [libvirt] VMware support and libcurl on rhel-u1,
Shahar Klein
- Re: [libvirt] VMware support and libcurl on rhel-u1,
Matthias Bolte
- Re: [libvirt] VMware support and libcurl on rhel-u1,
Shahar Klein
- Re: [libvirt] VMware support and libcurl on rhel-u1,
Daniel P. Berrange
- Re: [libvirt] VMware support and libcurl on rhel-u1,
Matthias Bolte
- Re: [libvirt] VMware support and libcurl on rhel-u1,
Daniel Veillard
Re: [libvirt] VMware support and libcurl on rhel-u1,
Matthias Bolte
[libvirt] Java JNA Patch series,
Bryan Kearney
- [libvirt] [PATCH] Initial work on the JNA port, still a work in progress,
Bryan Kearney
- [libvirt] [PATCH] Network is ported,
Bryan Kearney
- [libvirt] [PATCH] Exceptions are working using the callback,
Bryan Kearney
- [libvirt] [PATCH] Domain object is converted,
Bryan Kearney
- [libvirt] [PATCH] Add type safe pointers based on reviewing the RHQ code,
Bryan Kearney
- [libvirt] [PATCH] Storage Pool and Volumes are converted,
Bryan Kearney
- [libvirt] [PATCH] Auth code to review,
Bryan Kearney
- [libvirt] [PATCH] A bit of clean up from the list,
Bryan Kearney
- [libvirt] [PATCH] Ant build script to compile, doc, package, rpm,
Bryan Kearney
- [libvirt] [PATCH] Cleaned up the javadoc and the javadoc rpm,
Bryan Kearney
- Re: [libvirt] [PATCH] Cleaned up the javadoc and the javadoc rpm,
Daniel Veillard
- Re: [libvirt] [PATCH] Ant build script to compile, doc, package, rpm,
Daniel Veillard
- Re: [libvirt] [PATCH] Ant build script to compile, doc, package, rpm,
Bryan Kearney
- Re: [libvirt] [PATCH] Ant build script to compile, doc, package, rpm,
Daniel Veillard
- Re: [libvirt] [PATCH] Ant build script to compile, doc, package, rpm,
Bryan Kearney
- Re: [libvirt] [PATCH] Ant build script to compile, doc, package, rpm,
Daniel Veillard
- Re: [libvirt] [PATCH] A bit of clean up from the list,
Daniel Veillard
- Re: [libvirt] [PATCH] Auth code to review,
Daniel Veillard
- Re: [libvirt] [PATCH] Storage Pool and Volumes are converted,
Daniel Veillard
- Re: [libvirt] [PATCH] Storage Pool and Volumes are converted,
Bryan Kearney
- Re: [libvirt] [PATCH] Add type safe pointers based on reviewing the RHQ code,
Daniel Veillard
- Re: [libvirt] [PATCH] Domain object is converted,
Daniel Veillard
- Re: [libvirt] [PATCH] Domain object is converted,
Bryan Kearney
- Re: [libvirt] [PATCH] Domain object is converted,
Daniel Veillard
- Re: [libvirt] [PATCH] Exceptions are working using the callback,
Daniel Veillard
- Re: [libvirt] [PATCH] Network is ported,
Daniel Veillard
- Re: [libvirt] [PATCH] Network is ported,
Bryan Kearney
- Re: [libvirt] [PATCH] Network is ported,
Daniel Veillard
- Re: [libvirt] [PATCH] Network is ported,
Bryan Kearney
- Re: [libvirt] [PATCH] Initial work on the JNA port, still a work in progress,
Daniel Veillard
[libvirt] RFC: libvirt java bindings based on JNA,
Bryan Kearney
[libvirt] test driver and virtOpenAuth(),
Bryan Kearney
[libvirt] [PATCH] python: Raise exceptions if virDomain*Stats fail.,
Cole Robinson
[libvirt] [PATCH] test: Implement BlockStats and InterfaceStats,
Cole Robinson
[libvirt] [PATCH] test: Generate net interface names when assigning XML.,
Cole Robinson
[libvirt] [PATCH] Don't allow NULL paths for BlockStats and InterfaceStats,
Cole Robinson
Re: [libvirt] [PATCH 1/9] Add volume encryption information handling.,
Miloslav Trmac
[libvirt] [PATCH] docs: say that the old repository is deprecated...,
Jim Meyering
[libvirt] OpenVZ : The restriction of domain name should be addressed,
Yuji NISHIDA
[libvirt] How to call QEMU with -snapshot ?,
Jun Koi
Re: [libvirt] [PATCH 9/9] Add support for qcow encrypted volumes to qemu.,
Miloslav Trmac
[libvirt] How to get access to QEMU monitor?,
Jun Koi
[libvirt] [PATCH] document telnet serial console options,
Guido Günther
[libvirt] clone memory leak and libvirt connection selection,
Johnny Luong
[libvirt] [PATCH 0/7] QEMU network/bridge backed NIC hotplug,
Mark McLoughlin
[libvirt] [PATCH] Add bare %s format string to printf-derivatives called with no format string,
Laine Stump
[libvirt] PATCH: Fix many many win32 bugs,
Daniel P. Berrange
[libvirt] [PATCH] Power Hypervisor support,
Eduardo Otubo
[libvirt] [PATCH 0/2] Add some more features to LXC driver,
Daniel P. Berrange
[libvirt] [PATCH 0/1] RFC Fix problems with TLS connections & threading,
Daniel P. Berrange
[libvirt] [PATCH 0/8] Support cgroups in QEMU driver (v2),
Daniel P. Berrange
[libvirt] [PATCH] Release conn lock before reporting errors,
Laine Stump
[libvirt] [PATCH] Rename remaining occurrences of 'interface' to avoid MINGW32 build problem,
Laine Stump
[libvirt] managing libvirt users in a one-server context,
Juan Miscaro
[libvirt] [PATCH] libvirt-glib: add missing details argument to callbacks,
Guido Günther
[libvirt] [PATCH] libvirt-glib: import gtk instead of pygtk,
Guido Günther
[libvirt] fix "make distcheck" failures,
Jim Meyering
[libvirt] OpenVZ : cannot assign bridge to any interface,
Yuji NISHIDA
[libvirt] [PATCH 0/4] Fixes to some bugs encountered testing virInterface*,
Laine Stump
[libvirt] [PATCH] Support physical memory in virDomainMemoryPeek(),
Nguyen Anh Quynh
[libvirt] [PATCH 0/1] Multipath pool support,
David Allan
[libvirt] [PATCH] Make tcp_chr_read() use recvmsg(),
Mark McLoughlin
[libvirt] [PATCH] Add support for fd=name to tap and socket networking,
Mark McLoughlin
[libvirt] [PATCH] Add monitor_get_fd() command for fetching named fds,
Mark McLoughlin
[libvirt] [PATCH] Add SCM_RIGHTS support to unix socket character devices,
Mark McLoughlin
[libvirt] [PATCH] Add getfd and closefd monitor commands,
Mark McLoughlin
[libvirt] c&p error in api doc,
Thomas Treutner
[libvirt] [PATCH] Canonicalize qemu machine types,
Mark McLoughlin
[libvirt] VMware ESX driver progress,
Matthias Bolte
[libvirt] Workaround to start xen inside a buggy kvm,
Thomas Fricke
[libvirt] [PATCH 0/9] Add support for (qcow*) volume encryption,
Miloslav Trmač
[libvirt] [PATCH 3/9] Recognize encryption format of qcow volumes.,
Miloslav Trmač
[libvirt] [PATCH 4/9] Add support for encrypted (qcow) volume creation.,
Miloslav Trmač
[libvirt] [PATCH 5/9] Attach encryption information to virDomainDiskDef.,
Miloslav Trmač
[libvirt] [PATCH 6/9] Don't assume buffered output echoes the command.,
Miloslav Trmač
[libvirt] [PATCH 7/9] Make handling of monitor prompts more general.,
Miloslav Trmač
[libvirt] [PATCH 8/9] Consolidate "cont" into qemudMonitorSendCont().,
Miloslav Trmač
[libvirt] [PATCH 9/9] Add support for qcow encrypted volumes to qemu.,
Miloslav Trmač
Re: [libvirt] [PATCH 0/9] Add support for (qcow*) volume encryption,
Daniel P. Berrange
<Possible follow-ups>
Re: [libvirt] [PATCH 0/9] Add support for (qcow*) volume encryption,
Miloslav Trmac
Re: [libvirt] [PATCH 0/9] Add support for (qcow*) volume encryption,
Miloslav Trmac
Re: [libvirt] [PATCH 0/9] Add support for (qcow*) volume encryption,
Miloslav Trmac
[libvirt] MemoryPeek() is slow,
Jun Koi
[libvirt] libvirt-java, deprecated methods?,
Thomas Treutner
[libvirt] How to config my VM to use KVM with libvirt?,
Jun Koi
[libvirt] [patch] initialize a local variable in qemudOpenMonitorUnix(),
Jun Koi
[libvirt] [PATCH 0/6] virInterface bug fixes, test driver, and netcf backend driver,
Laine Stump
- [libvirt] [PATCH] Add VIR_ERR_MLTIPLE_INTERFACES error code.,
Laine Stump
- [libvirt] [PATCH] Call open method for registered interface drivers.,
Laine Stump
- [libvirt] [PATCH] Update MAC address in virInterface objects when needed.,
Laine Stump
- [libvirt] [PATCH] Add interface object list manipulation functions.,
Laine Stump
- [libvirt] [PATCH] Add a test interface driver.,
Laine Stump
- [libvirt] [PATCH] netcf backend for virInterface*.,
Laine Stump
- Re: [libvirt] [PATCH 0/6] virInterface bug fixes, test driver, and netcf backend driver,
Laine Stump
- [libvirt] [PATCH 0/4] Updated patches 2-6 - virInterface test driver and netcf backend,
Laine Stump
- [libvirt] [PATCH 1/4] Match MAC address as well as interface name in virGetinterface.,
Laine Stump
- [libvirt] [PATCH 2/4] Add interface object list manipulation functions.,
Laine Stump
- [libvirt] [PATCH 3/4] Add a test interface driver.,
Laine Stump
- [libvirt] [PATCH 4/4] netcf backend for virInterface*.,
Laine Stump
[libvirt] [PATCH] rpm spec cleanup and split off client only requirements,
Daniel Veillard
[libvirt] [PATCH 00/14] Add support for qemu NIC hotplug,
Mark McLoughlin
- [libvirt] [PATCH 01/14] Add XML flag for internal domain status,
Mark McLoughlin
- [libvirt] [PATCH 02/14] Retain disk PCI address across libvirtd restarts,
Mark McLoughlin
- [libvirt] [PATCH 03/14] Factor qemuBuildNicStr() out from qemuBuildCommandLine(),
Mark McLoughlin
- [libvirt] [PATCH 04/14] Factor qemuBuildHostNetStr() out from qemuBuildCommandLine(),
Mark McLoughlin
- [libvirt] [PATCH 05/14] Add checks for some NIC hotplug related features added in qemu-0.10.0,
Mark McLoughlin
- [libvirt] [PATCH 06/14] Assign names to qemu NICs and network backends,
Mark McLoughlin
- [libvirt] [PATCH 07/14] Add NIC and hostnet names to domain state XML,
Mark McLoughlin
- [libvirt] [PATCH 08/14] Store the interface vlan number in the domain state,
Mark McLoughlin
- [libvirt] [PATCH 09/14] Make qemuCmdFlags available in qemudDomainAttachDevice(),
Mark McLoughlin
- [libvirt] [PATCH 10/14] Basic qemu NIC hotplug support,
Mark McLoughlin
- [libvirt] [PATCH 11/14] Remove the network backend if NIC hotplug fails,
Mark McLoughlin
- [libvirt] [PATCH 12/14] Re-factor pci_add reply parsing and parse domain/bus numbers,
Mark McLoughlin
- [libvirt] [PATCH 13/14] Retain PCI address from NIC attach,
Mark McLoughlin
- [libvirt] [PATCH 14/14] Add support for network device detach,
Mark McLoughlin
- Re: [libvirt] [PATCH 14/14] Add support for network device detach,
Daniel Veillard
- Re: [libvirt] [PATCH 14/14] Add support for network device detach,
Mark McLoughlin
- Re: [libvirt] [PATCH 14/14] Add support for network device detach,
Daniel Veillard
- Re: [libvirt] [PATCH 14/14] Add support for network device detach,
Daniel P. Berrange
- Re: [libvirt] [PATCH 13/14] Retain PCI address from NIC attach,
Daniel Veillard
- Re: [libvirt] [PATCH 12/14] Re-factor pci_add reply parsing and parse domain/bus numbers,
Daniel Veillard
- Re: [libvirt] [PATCH 11/14] Remove the network backend if NIC hotplug fails,
Daniel Veillard
- Re: [libvirt] [PATCH 11/14] Remove the network backend if NIC hotplug fails,
Mark McLoughlin
- Re: [libvirt] [PATCH 11/14] Remove the network backend if NIC hotplug fails,
Daniel P. Berrange
- Re: [libvirt] [PATCH 10/14] Basic qemu NIC hotplug support,
Daniel Veillard
- Re: [libvirt] [PATCH 10/14] Basic qemu NIC hotplug support,
Mark McLoughlin
- Re: [libvirt] [PATCH 10/14] Basic qemu NIC hotplug support,
Daniel P. Berrange
- Re: [libvirt] [PATCH 10/14] Basic qemu NIC hotplug support,
Mark McLoughlin
- Re: [libvirt] [PATCH 09/14] Make qemuCmdFlags available in qemudDomainAttachDevice(),
Daniel Veillard
- Re: [libvirt] [PATCH 09/14] Make qemuCmdFlags available in qemudDomainAttachDevice(),
Daniel P. Berrange
- Re: [libvirt] [PATCH 08/14] Store the interface vlan number in the domain state,
Daniel Veillard
- Re: [libvirt] [PATCH 08/14] Store the interface vlan number in the domain state,
Mark McLoughlin
- Re: [libvirt] [PATCH 08/14] Store the interface vlan number in the domain state,
Daniel P. Berrange
- Re: [libvirt] [PATCH 08/14] Store the interface vlan number in the domain state,
Mark McLoughlin
- Re: [libvirt] [PATCH 07/14] Add NIC and hostnet names to domain state XML,
Daniel Veillard
- Re: [libvirt] [PATCH 07/14] Add NIC and hostnet names to domain state XML,
Daniel P. Berrange
- Re: [libvirt] [PATCH 06/14] Assign names to qemu NICs and network backends,
Daniel Veillard
- Re: [libvirt] [PATCH 06/14] Assign names to qemu NICs and network backends,
Daniel P. Berrange
- Re: [libvirt] [PATCH 05/14] Add checks for some NIC hotplug related features added in qemu-0.10.0,
Daniel Veillard
- Re: [libvirt] [PATCH 05/14] Add checks for some NIC hotplug related features added in qemu-0.10.0,
Mark McLoughlin
- Re: [libvirt] [PATCH 05/14] Add checks for some NIC hotplug related features added in qemu-0.10.0,
Daniel P. Berrange
- Re: [libvirt] [PATCH 04/14] Factor qemuBuildHostNetStr() out from qemuBuildCommandLine(),
Daniel Veillard
- Re: [libvirt] [PATCH 04/14] Factor qemuBuildHostNetStr() out from qemuBuildCommandLine(),
Daniel P. Berrange
- Re: [libvirt] [PATCH 03/14] Factor qemuBuildNicStr() out from qemuBuildCommandLine(),
Daniel Veillard
- Re: [libvirt] [PATCH 03/14] Factor qemuBuildNicStr() out from qemuBuildCommandLine(),
Daniel P. Berrange
- Re: [libvirt] [PATCH 02/14] Retain disk PCI address across libvirtd restarts,
Daniel Veillard
- Re: [libvirt] [PATCH 02/14] Retain disk PCI address across libvirtd restarts,
Mark McLoughlin
- Re: [libvirt] [PATCH 02/14] Retain disk PCI address across libvirtd restarts,
Daniel P. Berrange
- Re: [libvirt] [PATCH 02/14] Retain disk PCI address across libvirtd restarts,
Mark McLoughlin
- Re: [libvirt] [PATCH 02/14] Retain disk PCI address across libvirtd restarts,
Daniel Veillard
- Re: [libvirt] [PATCH 02/14] Retain disk PCI address across libvirtd restarts,
Mark McLoughlin
- Re: [libvirt] [PATCH 02/14] Retain disk PCI address across libvirtd restarts,
Daniel P. Berrange
- Re: [libvirt] [PATCH 01/14] Add XML flag for internal domain status,
Daniel Veillard
[libvirt] changing files in /var/lib/libvirt/images,
Gene Czarcinski
[libvirt] Bugfix for failing to reconnect to vbox:///session,
Pritesh Kothari
[libvirt] Tentative schedule for 0.7.0,
Daniel Veillard
[libvirt] Guest shutdown script,
SAL
[libvirt] One line logging fix,
Dave Allan
[libvirt] [PATCH 0/7] Support cgroups in QEMU driver,
Daniel P. Berrange
[libvirt] [RFC/Experimental]: Tunnelled migration,
Chris Lalancette
[libvirt] PATCH: Fix non-raw storage volume cloning,
Daniel P. Berrange
[libvirt] How to pass not xml parameters from Libvirt to Xen in xml definition,
Alexandre CABROL PERALES
[libvirt] Create a new VM from an existent image?,
Jun Koi
[libvirt] [libvirt 0.6.4] Unable to set /domain/devices/serial[@port=1] as console?,
Charles Duffy
[libvirt] [PATCH] build: do not emit a trailing blank line into VC'd file, NEWS,
Jim Meyering
Re: [libvirt] [PATCH 0/5] Add virConnectListDefinedInterfaces/NumOfDefinedInterfaces,
Daniel Veillard
[libvirt] [PATCH] Extra filesystem options during backend filesystem mount.,
Harshavardhana
[libvirt] PATCH: Allow QEMU VMs to be run unprivileged,
Daniel P. Berrange
[libvirt] PATCH: Fix free of uninitialized data on PCI device failure,
Daniel P. Berrange
[libvirt] [PATCH] Fix the configure flags in spec file,
Daniel Veillard
[libvirt] Can not get domain's cpu time,
Zhang Qian
[libvirt] Problem with libvirt and pci passthrough,
Mirko Raasch
[libvirt] consistency: push "update" hook vs. "make syntax-check",
Jim Meyering
[libvirt] Fix svirt handling of shared/readonly disks,
Daniel P. Berrange
[libvirt] [PATCH] 3/3 Add netcf XML validation and input and output tests,
Daniel Veillard
[libvirt] [PATCH] 2/3 Add netcf XML schemas and test data,
Daniel Veillard
[libvirt] [PATCH] 1/3 add support for netcf XML import and export,
Daniel Veillard
[libvirt] [PATCH] Update links to bugzilla,
Garry Dolley
[libvirt] [PATCH] build: submodule machinery now works also when no tag is reachable,
Jim Meyering
[libvirt] [PATCH] qemu: Try multiple times to open unix monitor socket,
Cole Robinson
[libvirt] virsh migrate with libvirt-0.5.1: failed to start listening VM,
Jakub Hrozek
[libvirt] [PATCH] fix generation of .git-submodule-status,
Paolo Bonzini
[libvirt] [PATCH 0/4] Prepare remote driver client for data streams,
Daniel P. Berrange
[libvirt] PATCH: Fix libvirtd autostart for test driver,
Daniel P. Berrange
[libvirt] [PATCH 0/9] Refactor remote protocol ready for data streams,
Daniel P. Berrange
- [libvirt] [PATCH 1/9] Split generic RPC message dispatch code out from remote protocol API handlers,
Daniel P. Berrange
- [libvirt] [PATCH 2/9] Decode incoming request header before invoking dispatch code,
Daniel P. Berrange
- [libvirt] [PATCH 3/9] Separate code for encoding outgoing remote message headers,
Daniel P. Berrange
- [libvirt] [PATCH 4/9] Change code generator to give async event messages their own postfix,
Daniel P. Berrange
- [libvirt] [PATCH 5/9] Move queuing of RPC replies into dispatch code,
Daniel P. Berrange
- [libvirt] [PATCH 6/9] Change the way client event loop watches are managed,
Daniel P. Berrange
- [libvirt] [PATCH 7/9] Split out code for handling incoming method call messages,
Daniel P. Berrange
- [libvirt] [PATCH 8/9] Define an API for registering incoming message dispatch filters,
Daniel P. Berrange
- [libvirt] [PATCH 9/9] Rename 'direction' to 'type' in remote_message_header,
Daniel P. Berrange
- Re: [libvirt] [PATCH 0/9] Refactor remote protocol ready for data streams,
Daniel Veillard
[libvirt] Can not shutdown and reboot KVM virtual machine,
Zhang Qian
[libvirt] Fedora Virtualization ... some comments and a request for help,
Gene Czarcinski
[libvirt] [PATCH 1/1] Support for Callbacks and VirtualBox Version 3.,
Pritesh Kothari
[libvirt] PATCH: Fix bug in error reporting for security driver,
Daniel P. Berrange
[libvirt] Moving Drivers to their respective directories under src/,
Pritesh Kothari
[libvirt] [PATCH 0/9] Storage cloning for LVM and Disk backends,
Cole Robinson
- [libvirt] [PATCH 1/9] storage: Refactor FS backend 'create' function choosing.,
Cole Robinson
- [libvirt] [PATCH 2/9] storage: Always assume we are tracking alloc progress in FS backend,
Cole Robinson
- [libvirt] [PATCH 4/9] storage: cleanup: do away with 'createFile',
Cole Robinson
- [libvirt] [PATCH 3/9] storage: Move most of the FS creation functions to common backend.,
Cole Robinson
- [libvirt] [PATCH 5/9] storage: Break out actual raw cloning to separate function.,
Cole Robinson
- [libvirt] [PATCH 6/9] storage: Implement 'CreateBlockFrom' helper.,
Cole Robinson
- [libvirt] [PATCH 7/9] storage: Don't try sparse detection if writing to block device.,
Cole Robinson
- [libvirt] [PATCH 8/9] storage: Implement CreateVolFrom for logical and disk backend.,
Cole Robinson
- [libvirt] [PATCH 9/9] storage: Fix deadlock when cloning across pools.,
Cole Robinson
- Re: [libvirt] [PATCH 0/9] Storage cloning for LVM and Disk backends,
Daniel Veillard
[libvirt] [PATCH 0/4] Storage disk backend fixes,
Cole Robinson
[libvirt] Is virConnectListDefinedDomains broken?,
Hongming Xiao
[libvirt] libvirt repositories mirrored on gitorious,
Daniel P. Berrange
[libvirt] [PATCH] Use virDomainChrTypeFromString() instead of open coding,
Mark McLoughlin
[libvirt] [PATCH] Link to libvirt tickets on the Red Hat Bugzilla Server,
Garry Dolley
[libvirt] [PATCH 0/4] Use a unix socket for the qemu monitor,
Mark McLoughlin
[libvirt] fix two "make syntax-check" failures,
Jim Meyering
[libvirt] [PATCH] implement virsh dump for qemu guests,
Paolo Bonzini
[libvirt] sound does not work for me,
Gene Czarcinski
Re: [libvirt] More then one pci device possible with libvirt and pci passthrough?,
Mirko Raasch
[libvirt] preview comments,
Gene Czarcinski
[libvirt] adding scsi disk failed (code=9),
Massimo Canonico
[libvirt] more options for virt-manager,
Gene Czarcinski
[libvirt] bootstrap/autogen.sh warnings/errors,
Daniel P. Berrange
[libvirt] [PATCH] Fix docs and code disagreements for character devices.,
Cole Robinson
[libvirt] [PATCH] qemu: Check driver is initialized up front, to avoid segfault.,
Cole Robinson
[libvirt] libvirt and physical hardware devices,
Arjun Roy
[libvirt] [PATCH] doc: clone+build instructions,
Jim Meyering
[libvirt] F11 and KVM Migrations,
Scott Baker
[libvirt] the role of libvirtd,
Hugh O. Brock
[libvirt] netcf error message...,
Shahar Klein
[libvirt] PATCH: Fix LXC container capabilities,
Daniel P. Berrange
[libvirt] [PATCH 4/4] generate ChangeLog from git logs into distribution tarball,
Jim Meyering
[libvirt] [PATCH 3/4] fix another failing "make distcheck" (qemuhelptest),
Jim Meyering
[libvirt] [PATCH 2/4] fix failing "make distcheck",
Jim Meyering
[libvirt] [PATCH 1/4] Don't use mylibtool, (subsumed by automake's silent rules),
Jim Meyering
[libvirt] PATCH 2/2: Support <video> element in QEMU driver,
Daniel P. Berrange
[libvirt] PATCH 1/2: Support <video> element in domain config,
Daniel P. Berrange
[libvirt] daily builds of pristine upstream sources for qemu, qemu-kvm, and libvirt,
Dustin Kirkland
[libvirt] PATCH: Video device config,
Tom Hughes
[libvirt] [PATCH] use gnulib via a submodule,
Jim Meyering
[libvirt] PATCH: Relabel disk images *before* hotplugging,
Daniel P. Berrange
[libvirt] PATCH: Handle changed monitor syntax for PCI hotplug/unplug,
Daniel P. Berrange
[libvirt] PATCH Fix QEMU monitor prompt confusion,
Daniel P. Berrange
[libvirt] PATCH: Set stdout/err to /dev/null for spawned children,
Daniel P. Berrange
[libvirt] PATCH: Allow libvirtd autostart to be disabled,
Daniel P. Berrange
[libvirt] turn off dnsmasq,
Mike Power
[libvirt] [PATCH] provide the object name on lookup error,
Daniel Veillard
[libvirt] Cannot get network to work with LXC,
James Yu
[libvirt] [PATCH] don't raise a missing network as an internal error,
Daniel Veillard
[libvirt] [PATCH 1/2] Added new filesystem glusterfs,
Harshavardhana
[libvirt] [PATCH 2/2] RPM spec file updated with glusterfs dependency,
Harshavardhana
[libvirt] Can't boot guest after adding an IDE storage,
M. Mohan Kumar
[libvirt] [PATCH] allow to set path to xen userspace tools,
Guido Günther
[libvirt] make distcheck failure,
Guido Günther
[libvirt] [PATCH 0/2] updated/working patches for netcf backend and virsh commands for virInterface*,
Laine Stump
Re: [libvirt] PATCH: 0/3: Run QEMU guests within a CGroup,
Nikola Ciprich
Re: [libvirt] [PATCH] Power Hypervisor Support for libvirt - minimum set of features,
Eduardo Otubo
RE: [libvirt] [PATCH] Do a correct format mapping of partitions 2,
Henrik Persson E
[libvirt] Switch from CVS to GIT is done,
Daniel Veillard
[libvirt] [PATCH] createLinux requires full-access connection,
Dan Kenigsberg
[libvirt] Save and restore with KVM!,
Erkan Unal
[libvirt] Release of libvirt-0.6.5,
Daniel Veillard
[libvirt] [PATCH 1/2] Re-label shared and readonly images,
Mark McLoughlin
[libvirt] gitignore & cscope,
Dave Allan
[libvirt] Re: kernel summit topic - 'containers end-game',
Daniel Lezcano
Re: [libvirt] [Patch] Fix network driver not to forget to save <domain/> in network XML file,
Daniel Veillard
Re: [libvirt] [Patch] Network schema fixes and updates,
Daniel Veillard
[libvirt] [PATCH] add cd and pwd commands to virsh,
Paolo Bonzini
Re: [libvirt] vTPM support in libvirt,
Andreas Sommer
[libvirt] [PATCH] Fix node dumpxml infinite loop,
Cole Robinson
[libvirt] PATCH: Opennebula Documentation updates,
Abel Míguez Rodríguez
[libvirt] libvirt 0.6.4: Confusing error message during virDomainRestore() if network not started,
Charles Duffy
[libvirt] Patch to include arm variants in virsh capabilities,
C.J. Adams-Collier
[libvirt] fix for crash in NPIV code,
Dave Allan
[libvirt] PATCH : Opennebula documentation,
Abel Míguez Rodríguez
[libvirt] While connecting through xen+ssh, virConnectClose doesn't close the connection,
Alexandru Nedelcu
Re: [libvirt] PATCH : Opennebula, adding xen i686 domain capability and updating some error messages,
Daniel Veillard
Re: [libvirt] [PATCH] Power Hypervisor Support for libvirt - minimum set of features,
Daniel P. Berrange
[libvirt] Upcoming 0.6.5 release and switching the main SCM engine (to git),
Daniel Veillard
Re: [libvirt] PATCH : Opennebula, adding xen i686 domain capability and updating some error messages,
Daniel P. Berrange
Re: [libvirt] [PATCH] logging: remove unused level 0,
Daniel Veillard
Re: [libvirt] [PATCH 0/1] Fix pool create when pool already exists,
Daniel Veillard
Re: [libvirt] [PATCH 1/1] Fix pool create when pool already exists.,
Daniel Veillard
Re: [libvirt] kernel summit topic - 'containers end-game',
Balbir Singh