[libvirt] [PATCH 8/9] Re-arrange doTunnelMigrate to simplify cleanup code
Daniel P. Berrange
berrange at redhat.com
Mon Oct 5 11:44:55 UTC 2009
Re-arrange the doTunnelMigrate method putting all non-QEMU local
state setup steps first. This maximises chances of success before
then starting destination QEMU for receiving incoming migration.
Altogether this can reduce the number of goto cleanup labels to
something more managable.
* qemu/qemu_driver.c: Re-order steps in doTunnelMigrate
---
src/qemu/qemu_driver.c | 119 +++++++++++++++++++++++++++++-------------------
1 files changed, 72 insertions(+), 47 deletions(-)
diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
index eea85b3..a15f8ed 100644
--- a/src/qemu/qemu_driver.c
+++ b/src/qemu/qemu_driver.c
@@ -6510,47 +6510,43 @@ static int doTunnelMigrate(virDomainPtr dom,
unsigned long resource)
{
struct qemud_driver *driver = dom->conn->privateData;
- int client_sock, qemu_sock;
+ int client_sock = -1;
+ int qemu_sock = -1;
struct sockaddr_un sa_qemu, sa_client;
socklen_t addrlen;
- virDomainPtr ddomain;
+ virDomainPtr ddomain = NULL;
int retval = -1;
- ssize_t bytes;
- virStreamPtr st;
+ virStreamPtr st = NULL;
char *unixfile = NULL;
int internalret;
unsigned int qemuCmdFlags;
int status;
unsigned long long transferred, remaining, total;
- /* the order of operations is important here; we make sure the
- * destination side is completely setup before we touch the source
+ /*
+ * The order of operations is important here to avoid touching
+ * the source VM until we are very sure we can successfully
+ * start the migration operation.
+ *
+ * 1. setup local support infrastructure (eg sockets)
+ * 2. setup destination fully
+ * 3. start migration on source
*/
- st = virStreamNew(dconn, 0);
- if (st == NULL)
- /* virStreamNew only fails on OOM, and it reports the error itself */
- goto cleanup;
- internalret = dconn->driver->domainMigratePrepareTunnel(dconn, st,
- flags, dname,
- resource, dom_xml);
-
- if (internalret < 0)
- /* domainMigratePrepareTunnel sets the error for us */
- goto close_stream;
+ /* Stage 1. setup local support infrastructure */
if (virAsprintf(&unixfile, "%s/qemu.tunnelmigrate.src.%s",
driver->stateDir, vm->def->name) < 0) {
virReportOOMError(dom->conn);
- goto finish_migrate;
+ goto cleanup;
}
qemu_sock = socket(AF_UNIX, SOCK_STREAM, 0);
if (qemu_sock < 0) {
virReportSystemError(dom->conn, errno, "%s",
_("cannot open tunnelled migration socket"));
- goto free_unix_path;
+ goto cleanup;
}
memset(&sa_qemu, 0, sizeof(sa_qemu));
sa_qemu.sun_family = AF_UNIX;
@@ -6559,20 +6555,20 @@ static int doTunnelMigrate(virDomainPtr dom,
qemudReportError(dom->conn, NULL, NULL, VIR_ERR_INTERNAL_ERROR,
_("Unix socket '%s' too big for destination"),
unixfile);
- goto close_qemu_sock;
+ goto cleanup;
}
unlink(unixfile);
if (bind(qemu_sock, (struct sockaddr *)&sa_qemu, sizeof(sa_qemu)) < 0) {
virReportSystemError(dom->conn, errno,
_("Cannot bind to unix socket '%s' for tunnelled migration"),
unixfile);
- goto close_qemu_sock;
+ goto cleanup;
}
if (listen(qemu_sock, 1) < 0) {
virReportSystemError(dom->conn, errno,
_("Cannot listen on unix socket '%s' for tunnelled migration"),
unixfile);
- goto close_qemu_sock;
+ goto cleanup;
}
/* check that this qemu version supports the unix migration */
@@ -6580,25 +6576,53 @@ static int doTunnelMigrate(virDomainPtr dom,
qemudReportError(dom->conn, NULL, NULL, VIR_ERR_INTERNAL_ERROR,
_("Cannot extract Qemu version from '%s'"),
vm->def->emulator);
- goto close_qemu_sock;
+ goto cleanup;
+ }
+
+ if (!(qemuCmdFlags & QEMUD_CMD_FLAG_MIGRATE_QEMU_UNIX) &&
+ !(qemuCmdFlags & QEMUD_CMD_FLAG_MIGRATE_QEMU_EXEC)) {
+ qemudReportError(dom->conn, NULL, NULL, VIR_ERR_OPERATION_FAILED,
+ "%s", _("Source qemu is too old to support tunnelled migration"));
+ goto cleanup;
}
+
+
+ /* Stage 2. setup destination fully
+ *
+ * Once stage 2 has completed successfully, we *must* call finish
+ * to cleanup the target whether we succeed or fail
+ */
+ st = virStreamNew(dconn, 0);
+ if (st == NULL)
+ /* virStreamNew only fails on OOM, and it reports the error itself */
+ goto cleanup;
+
+ internalret = dconn->driver->domainMigratePrepareTunnel(dconn, st,
+ flags, dname,
+ resource, dom_xml);
+
+ if (internalret < 0)
+ /* domainMigratePrepareTunnel sets the error for us */
+ goto cleanup;
+
+ /* 3. start migration on source */
if (qemuCmdFlags & QEMUD_CMD_FLAG_MIGRATE_QEMU_UNIX)
internalret = qemuMonitorMigrateToUnix(vm, 1, unixfile);
else if (qemuCmdFlags & QEMUD_CMD_FLAG_MIGRATE_QEMU_EXEC) {
const char *args[] = { "nc", "-U", unixfile, NULL };
internalret = qemuMonitorMigrateToCommand(vm, 1, args, "/dev/null");
- }
- else {
- qemudReportError(dom->conn, NULL, NULL, VIR_ERR_OPERATION_FAILED,
- "%s", _("Source qemu is too old to support tunnelled migration"));
- goto close_qemu_sock;
+ } else {
+ internalret = -1;
}
if (internalret < 0) {
qemudReportError(dom->conn, dom, NULL, VIR_ERR_OPERATION_FAILED,
"%s", _("tunnelled migration monitor command failed"));
- goto close_qemu_sock;
+ goto finish;
}
+ /* From this point onwards we *must* call cancel to abort the
+ * migration on source if anything goes wrong */
+
/* it is also possible that the migrate didn't fail initially, but
* rather failed later on. Check the output of "info migrate"
*/
@@ -6606,13 +6630,13 @@ static int doTunnelMigrate(virDomainPtr dom,
&transferred,
&remaining,
&total) < 0) {
- goto qemu_cancel_migration;
+ goto cancel;
}
if (status == QEMU_MONITOR_MIGRATION_STATUS_ERROR) {
qemudReportError(dom->conn, dom, NULL, VIR_ERR_OPERATION_FAILED,
"%s",_("migrate failed"));
- goto qemu_cancel_migration;
+ goto cancel;
}
addrlen = sizeof(sa_client);
@@ -6621,36 +6645,37 @@ static int doTunnelMigrate(virDomainPtr dom,
continue;
virReportSystemError(dom->conn, errno, "%s",
_("tunnelled migration failed to accept from qemu"));
- goto qemu_cancel_migration;
+ goto cancel;
}
retval = doTunnelSendAll(dom, st, client_sock);
- close(client_sock);
-
-qemu_cancel_migration:
+cancel:
if (retval != 0)
qemuMonitorMigrateCancel(vm);
-close_qemu_sock:
- close(qemu_sock);
-
-free_unix_path:
- unlink(unixfile);
- VIR_FREE(unixfile);
-
-finish_migrate:
+finish:
dname = dname ? dname : dom->name;
ddomain = dconn->driver->domainMigrateFinish2
(dconn, dname, NULL, 0, uri, flags, retval);
+
+cleanup:
+ if (client_sock != -1)
+ close(client_sock);
+ if (qemu_sock != -1)
+ close(qemu_sock);
+
if (ddomain)
virUnrefDomain(ddomain);
-close_stream:
- /* don't call virStreamFree(), because that resets any pending errors */
- virUnrefStream(st);
+ if (unixfile) {
+ unlink(unixfile);
+ VIR_FREE(unixfile);
+ }
-cleanup:
+ if (st)
+ /* don't call virStreamFree(), because that resets any pending errors */
+ virUnrefStream(st);
return retval;
}
--
1.6.2.5
More information about the libvir-list
mailing list