2011-October Archive by Thread
Messages are ordered newest-to-oldest in this index. The newest
threads will be at the top of this page, the oldest will be at the bottom.
Within a single thread, the first mail note is the START of the
thread; the notes following that are in the chronological order of
when they were received. So globally, newest messages are at the top,
but within a thread, the oldest (the start of the thread) is at the
top.
If you think about it, it is confusing. Just go with the flow and everything will be all right.
- [libvirt] [PATCH 1/2] docs: improve typed parameter documentation,
Eric Blake
- [libvirt] [PATCH] python: Fix documentation of virStream recv,
Matthias Bolte
- [libvirt] [PATCH V5 0/4] Support for multiple IP addresses using lists,
Stefan Berger
- [libvirt] [PATCH] Fix URI alias prefix matching,
Wen Ruo Lv
- Re: [libvirt] [BUG] Fix order of disks and controllers,
Philipp Hahn
- [libvirt] Start of freeze for libvirt-0.9.7 and availability of rc1,
Daniel Veillard
- [libvirt] how can I get these packages?,
chang liu
- [libvirt] building failed,
Wen Congyang
- [libvirt] [PATCH] storage: add lvchange operation while lvremove fails.,
chang liu
- Re: [libvirt] [PATCH] vbox: Support shared folders,
Matthias Bolte
- Re: [libvirt] [PATCH] xenapi: Improve error reporting in xenapiOpen once again,
Matthias Bolte
- [libvirt] RFC decoupling VM NIC provisioning from VM NIC connection to backend networks,
Sumit Naiksatam (snaiksat)
- [libvirt] [PATCH] macvtap: Fix error return value convention/inconsistencies,
Roopa Prabhu
- [libvirt] [PATCH] qemu: plug memory leak,
ajia
- [libvirt] [PATCH] util: Fix virUUIDGeneratePseudoRandomBytes,
Ryota Ozaki
- [libvirt] [PATCH v4] pci address conflict when virtio disk with drive type,
Xu He Jie
- [libvirt] [PATCH V4 0/4] Support for multiple IP addresses using lists,
Stefan Berger
- [libvirt] [PATCH v4 00/13] Implement keepalive protocol for libvirt RPC,
Jiri Denemark
- [libvirt] [PATCH v4 01/13] Define keepalive protocol,
Jiri Denemark
- [libvirt] [PATCH v4 02/13] Implement common keepalive handling,
Jiri Denemark
- [libvirt] [PATCH v4 03/13] Introduce virConnectSetKeepAlive,
Jiri Denemark
- [libvirt] [PATCH v4 04/13] virsh: Always run event loop,
Jiri Denemark
- [libvirt] [PATCH v4 05/13] Implement keepalive protocol in libvirt daemon,
Jiri Denemark
- [libvirt] [PATCH v4 06/13] Add support for non-blocking calls in client RPC,
Jiri Denemark
- [libvirt] [PATCH v4 07/13] Add support for async close of client RPC socket,
Jiri Denemark
- [libvirt] [PATCH v4 08/13] Implement keepalive protocol in remote driver,
Jiri Denemark
- [libvirt] [PATCH v4 09/13] Introduce virConnectIsAlive API,
Jiri Denemark
- [libvirt] [PATCH v4 10/13] Implement virConnectIsAlive in all drivers,
Jiri Denemark
- [libvirt] [PATCH v4 11/13] Add keepalive support into domain-events examples,
Jiri Denemark
- [libvirt] [PATCH v4 12/13] qemu: Add support for keepalive messages during p2p migration,
Jiri Denemark
- [libvirt] [PATCH v4 13/13] qemu: Cancel p2p migration when connection breaks,
Jiri Denemark
- [libvirt] custom network filter,
Shahar Havivi
- [libvirt] QEMU 1.0 test day - November 7th,
Paolo Bonzini
- [libvirt] [PATCH] lxc: remove dummy function,
ajia
- [libvirt] [PATCH v2] Add documentation about migration.,
Daniel P. Berrange
- [libvirt] [PATCH 8/8] Support virDomainGetBlockIoThrottle in the python API,
Lei Li
- [libvirt] [PATCH 7/8] Enable the blkiothrottle command in virsh,
Lei Li
- [libvirt] [PATCH 6/8] Implement Get Block IO Throttle for qemu driver,
Lei Li
- [libvirt] [PATCH 5/8] Getting Block IO Throttle support to remote driver,
Lei Li
- [libvirt] [PATCH 4/8] Add new API virDomainGetBlockIoThrottle,
Lei Li
- [libvirt] [PATCH 3/8] Implement Block Io Throttle setting for the qemu driver,
Lei Li
- [libvirt] [PATCH 2/8] Add Block IO Throttle support setting to the remote driver,
Lei Li
- [libvirt] [PATCH 1/8] Add new API virDomainSetBlockIoThrottle,
Lei Li
- [libvirt] [RFC PATCH 0/8 v2] Summary on block IO throttle,
Lei Li
- Re: [libvirt] [RFC PATCH v3 4/4] qemu/rbd: improve rbd device specification,
Daniel P. Berrange
- Re: [libvirt] [RFC PATCH v3 3/4] qemu: pass virConnectPtr into Domain{Attach, Detach}*,
Daniel P. Berrange
- Re: [libvirt] [RFC PATCH v3 2/4] storage: add auth to virDomainDiskDef,
Daniel P. Berrange
- Re: [libvirt] [RFC PATCH v3 1/4] secret: add Ceph secret type,
Daniel P. Berrange
- [libvirt] [PATCH] Fix typo in virFileAccessibleAs,
Daniel P. Berrange
- [libvirt] [PATCH] lxc: avoid missing '{' in the function,
ajia
- [libvirt] [PATCH] lxc: avoid null deref on lxcSetupLoopDevices failure,
ajia
- [libvirt] [PATCH] lxc: remove redundant check,
ajia
- Re: [libvirt] [PATCH] lxc: remove redundant check,
Daniel P. Berrange
- Re: [libvirt] [PATCH] lxc: remove redundant check,
Alex Jia
- Re: [libvirt] [PATCH] lxc: remove redundant check,
Daniel P. Berrange
- Re: [libvirt] [PATCH] lxc: remove redundant check,
Alex Jia
- Re: [libvirt] [PATCH] lxc: remove redundant check,
Daniel P. Berrange
- Re: [libvirt] [PATCH] lxc: remove redundant check,
Alex Jia
- Re: [libvirt] [PATCH] lxc: remove redundant check,
Alex Jia
- Re: [libvirt] [PATCH] lxc: remove redundant check,
Michal Privoznik
- Re: [libvirt] [PATCH] lxc: remove redundant check,
Alex Jia
- Re: [libvirt] [PATCH] lxc: remove redundant check,
Daniel P. Berrange
- Re: [libvirt] [PATCH] lxc: remove redundant check,
Eric Blake
- Re: [libvirt] [PATCH] lxc: avoid missing '{' in the function,
Peter Krempa
- Re: [libvirt] [PATCH] lxc: avoid missing '{' in the function,
Daniel P. Berrange
- Re: [libvirt] [RFC PATCH v3 0/4] Improve Ceph Qemu+RBD support,
Sage Weil
- [libvirt] [libvirt-glib 1/2] Add API to build & start storage pools,
Zeeshan Ali (Khattak)
- [libvirt] [PATCH] build: avoid RHEL 5 build failure on LXC,
Eric Blake
- [libvirt] changes to domain XML for SCSI support,
Paolo Bonzini
- [libvirt] [PATCH V1 0/9] NWFilter: Filter more protocols and other extensions,
Stefan Berger
- [libvirt] [PATCH V4 00/10] Make inner workings of nwfilters more flexible + extensions,
Stefan Berger
- [libvirt] [PATCH V4 01/10] Extend virHashTable with function to get hash tables keys,
Stefan Berger
- [libvirt] [PATCH V4 02/10] Introduce an internal priority for chains,
Stefan Berger
- [libvirt] [PATCH V4 03/10] Make filter creation in root table more flexible,
Stefan Berger
- [libvirt] [PATCH V4 04/10] Use scripting for cleaning and renaming of chains,
Stefan Berger
- [libvirt] [PATCH V4 05/10] Use the actual names of chains in data structure,
Stefan Berger
- [libvirt] [PATCH V4 08/10] Extend rule priorities into negative numbers,
Stefan Berger
- [libvirt] [PATCH V4 07/10] Enable chains with names having a known prefix,
Stefan Berger
- [libvirt] [PATCH V4 06/10] Extend the filter XML to support priorities of chains,
Stefan Berger
- [libvirt] [PATCH V4 09/10] Interleave jumping into chains with filtering rules in root table,
Stefan Berger
- [libvirt] [PATCH V4 10/10] Add test cases,
Stefan Berger
- [libvirt] [PATCH] startupPolicy: Change event argument,
Michal Privoznik
- [libvirt] [PATCH] startupPolicty: Minor cleanups,
Michal Privoznik
- [libvirt] [libosinfo 1/2] Add gvir_connection_create_storage_pool(),
Zeeshan Ali (Khattak)
- [libvirt] [libosinfo 1/2] Set GError even if libvirt error is unknown,
Zeeshan Ali (Khattak)
- [libvirt] [PATCH 0/8 v3] Allow a client to connect to QEMU's VNC by passing an FD via libvirt,
Daniel P. Berrange
- [libvirt] [PATCH] nwfilter: extend schema to support new targets,
Stefan Berger
- [libvirt] [PATCH] util: Add virFileAccessibleAs to private symbols,
Michal Privoznik
- [libvirt] Minor correction in the website text,
Siddhesh Poyarekar
- [libvirt] [PATCH] fix compile error :undefined reference to `virFileAccessibleAs',
taget
- [libvirt] [PATCH 0/4] New APIs and virsh commands to manage saved-state & core-dump files,
Hong Xiang
- [libvirt] [PATCH 0/3] Restrict saved-state and core-dump files in controlled directories,
Hong Xiang
- [libvirt] [PATCH 0/2] V2 Modify generic ethernet interface so it will work when sVirt is enabled with qemu,
Tyler Coumbes
- [libvirt] [libvirt PATCHv4 0/2] DHCP Snooping support for libvirt,
David L Stevens
[libvirt] [libvirt PATCHv4 2/2] add leasefile support,
David L Stevens
Re: [libvirt] [libvirt PATCHv4 0/2] DHCP Snooping support for libvirt,
Stefan Berger
[libvirt] [PATCH] build: use gnulib fdatasync,
Eric Blake
[libvirt] libvirt and clustered volume group problems,
Rommer
[libvirt] [PATCH] Report 'errno' in int1 field of virErrorPtr,
Daniel P. Berrange
[libvirt] [PATCH] Fix off-by-one printing month in logging code,
Daniel P. Berrange
[libvirt] [PATCH V3 0/4] Support for multiple IP addresses using lists,
Stefan Berger
[libvirt] [PATCH] Add a systemtap script for watching QEMU monitor interactions,
Daniel P. Berrange
[libvirt] [PATCH] Add documentation about migration.,
Daniel P. Berrange
[libvirt] [PATCH V2 0/4] Support for multiple IP addresses using lists,
Stefan Berger
[libvirt] [PATCH] virsh: Fix error message on vol-create-from failure,
Ryota Ozaki
[libvirt] [PATCH] storage: Fix error message on vol-create-from failure,
Ryota Ozaki
[libvirt] [PATCH] qemu: Forbid specify target path for disk vol,
Osier Yang
[libvirt] [PATCH] doc: Correct the default werror policy,
Osier Yang
[libvirt] Expose qemu monitor command query_block?,
Osier Yang
[libvirt] How to use "virsh migrat" with p2p option?,
Guangya Liu
[libvirt] [PATCH] vbox: Add support for VirtualBox 4.1,
Matthias Bolte
[libvirt] [PATCH v3] pci address conflict when virtio disk with drive type,
Xu He Jie
[libvirt] [PATCH][Take2] virsh: Fix vol-info's 'Type' output,
Ryota Ozaki
[libvirt] [PATCH] qemu: avoid leaking uninit data from hotplug to dumpxml,
Eric Blake
[libvirt] [PATCH 1/2] storage: plug iscsi memory leak,
Eric Blake
[libvirt] [PATCH] storage: avoid null deref on qemu-img failure,
Eric Blake
Re: [libvirt] [PATCHv2 12/13] snapshot: minor cleanups from reviewing indentation,
Peter Krempa
[libvirt] [PATCH V1 0/4] Support for multiple IP addresses using lists,
Stefan Berger
Re: [libvirt] [PATCHv2 11/13] snapshot: simplify indentation of disk encryption xml,
Peter Krempa
Re: [libvirt] [PATCHv2 10/13] snapshot: simplify indentation of nwfilter,
Peter Krempa
[libvirt] [PATCH/RFC] Introduce VIR_MIGRATE_FORCE flag to allow for risky migration,
Guido Günther
[libvirt] [PATCH] lxc: check for waitpid failure,
Eric Blake
[libvirt] [PATCH] docs: Document filesystem type='block' for LXC,
Ryota Ozaki
[libvirt] [PATCH 0/8 v2] Allow a client to connect to QEMU's VNC by passing an FD via libvirt,
Daniel P. Berrange
[libvirt] [PATCH] esx: Support vSphere 5.x,
Patrice LACHANCE
[libvirt] [PATCH libvirt-glib] Fix vapigen on uninstalled environment,
Marc-André Lureau
[libvirt] [PATCH libvirt-glib] Fix GIR scanner on uninstalled environment,
Marc-André Lureau
[libvirt] [PATCH] qemu: simplify use of HAVE_YAJL,
Eric Blake
[libvirt] [PATCH] docs: fix incorrect info about routed networks,
Laine Stump
[libvirt] passing secrets to block devices,
Josh Durgin
[libvirt] [PATCH] macvtap: Fix error return values to -1 instead of 1,
Roopa Prabhu
[libvirt] [PATCH v4 0/5] Allow to make disk optional on migration,
Michal Privoznik
[libvirt] [PATCH 0/7] Allow multiple console devices for each guest,
Daniel P. Berrange
Re: [libvirt] [PATCHv2 09/13] snapshot: simplify indentation of network xml,
Peter Krempa
Re: [libvirt] [PATCHv2 08/13] snapshot: simplify indentation of cpu features,
Peter Krempa
[libvirt] [PATCH] virsh: Fix vol-info's 'Type' output,
Ryota Ozaki
[libvirt] [PATCH] The output of domxml-to-native should be the same as the actual commandline.,
tangchen
Re: [libvirt] [PATCHv2 07/13] snapshot: simplify indentation of sysinfo,
Peter Krempa
[libvirt] [PATCH] qemu: Restore the original states of PCI device when restarting daemon,
Osier Yang
Re: [libvirt] [PATCHv2 06/13] snapshot: test domainsnapshot indentation,
Hai Dong Li
[libvirt] [FYI] Skript to extract qcow2 snapshot info to libvirt snapshot xml,
Philipp Hahn
Re: [libvirt] [PATCHv2] snapshot: detect when qemu lacks disk-snapshot support,
lvroyce
[libvirt] Plan for the next release,
Daniel Veillard
[libvirt] [PATCH v2] pci address conflict when virtio disk with drive type,
Xu He Jie
[libvirt] [PATCH 1/3] Add vapi bindings generation,
Marc-André Lureau
[libvirt] [PATCH] build: ignore test executable,
Eric Blake
Re: [libvirt] [PATCHv2 05/13] snapshot: indent domain xml when nesting,
Peter Krempa
[libvirt] [PATCH V2 00/10] Make inner workings of nwfilters more flexible + extensions,
Stefan Berger
- [libvirt] [PATCH V2 02/10] Introduce an internal priority for chains,
Stefan Berger
- [libvirt] [PATCH V2 09/10] Interleave jumping into chains with filtering rules in root table,
Stefan Berger
- [libvirt] [PATCH V2 05/10] Use the actual names of chains in data structure,
Stefan Berger
- [libvirt] [PATCH V2 07/10] Enable chains with names having a known prefix,
Stefan Berger
- [libvirt] [PATCH V2 06/10] Extend the filter XML to support priorities of chains,
Stefan Berger
- [libvirt] [PATCH V2 10/10] Add test cases,
Stefan Berger
- [libvirt] [PATCH V2 04/10] Use scripting for cleaning and renaming of chains,
Stefan Berger
- [libvirt] [PATCH V2 03/10] Make filter creation in root table more flexible,
Stefan Berger
- [libvirt] [PATCH V2 01/10] Extend virHashTable with function to get hash tables keys,
Stefan Berger
- [libvirt] [PATCH V2 08/10] Extend rule priorities into negative numbers,
Stefan Berger
- Re: [libvirt] [PATCH V2 00/10] Make inner workings of nwfilters more flexible + extensions,
David Stevens
[libvirt] [PATCH 0/4] Make rewriting XML files more robust,
Jiri Denemark
[libvirt] [PATCH v3 0/4] Allow to make disk optional on migration,
Michal Privoznik
[libvirt] [PATCH] qemu: Do not free the device from activePciHostdevs if it's in use,
Osier Yang
[libvirt] [PATCH] Replace virBufferAdd with virBufferAddLit for const string,
Daniel P. Berrange
[libvirt] [PATCH] snapshot: detect when qemu lacks disk-snapshot support,
Eric Blake
[libvirt] [libvirt PATCH] support continue/return targets in nwfilter,
David L Stevens
[libvirt] [PATCH 1/2] qemu: Fix name-space handling,
Philipp Hahn
[libvirt] [PATCH] documentation: trivial spelling fix,
Philipp Hahn
[libvirt] [PATCH 3/3] qemu: replace qemuMonitorEscapeShell by virBufferEscapeShell,
Guido Günther
[libvirt] [PATCH 2/3] Use virBufferEscapeShell in cmdEcho,
Guido Günther
[libvirt] [PATCH 1/3] virBufferEscapeShell: Emit quotes for the empty string,
Guido Günther
[libvirt] [PATCH 0/3] Consolidate shell escape functions,
Guido Günther
[libvirt] [PATCH libvirt-snmp 0/3] fix problems found by coverity,
Laine Stump
Re: [libvirt] [PATCHv2 04/13] virbuf: add auto-indentation support,
Hai Dong Li
[libvirt] [PATCH] pci address conflict when virtio disk with drive type address,
Xu He Jie
[libvirt] [RFC] Use libssh2 for ssh transport instead of forking ssh process.,
Peter Krempa
[libvirt] [PATCH] compile: fix undefined reference to gnutls_x509_crt_get_dn with gcc-4.6.1,
Xu He Jie
[libvirt] [PATCH] virBufferEscapeShell: Fix escaping of single quotes.,
Guido Günther
Re: [libvirt] [PATCHv2 03/13] virbuf: more detailed error reporting,
Hai Dong Li
Re: [libvirt] [PATCHv2 02/13] virbuf: improve testsuite reporting,
Hai Dong Li
[libvirt] [PATCH] compile: Add a missing function 'pciDeviceListFind' to libvirt_private.syms,
Xu He Jie
[libvirt] [PATCH] Fix virt-sanlock-cleanup documentation,
Philipp Hahn
[libvirt] [PATCH] qemu: avoid dereferencing a NULL pointer,
ajia
[libvirt] [PATCH] Fix VPATH build,
Jiri Denemark
[libvirt] Compiler warnings,
Alex Jia
[libvirt] [PATCH] Fix two comments related to error handling,
Philipp Hahn
[libvirt] [PATCH V1 0/6] Make part of inner workings of nwfilters more flexible,
Stefan Berger
[libvirt] [BUG, RFC] Python generator: missing error_codes in generated libvirError exceptions,
Philipp Hahn
[libvirt] [libvirt-glib] Remove vir- prefix from signals,
Christophe Fergeau
Re: [libvirt] [PATCHv2 01/13] virbuf: fix const-correctness,
Hai Dong Li
[libvirt] [PATCH] qemu: Honor the original properties of PCI device when detaching,
Osier Yang
[libvirt] [PATCH] Add support for autodestroy of guests to the LXC and UML drivers,
Daniel P. Berrange
[libvirt] [PATCH] qemu: Do not wait if the PCI device is not managed when reattaching,
Osier Yang
[libvirt] [PATCH] qemu: Relax -no-shutdown check to [0.14.0, 0.15.0],
Jiri Denemark
[libvirt] [PATCH] docs: document managed=yes of hostdev passthrough,
Eric Blake
[libvirt] [PATCH] Add missing strdup return value check,
Roopa Prabhu
Re: [libvirt] [PATCH] Bug Fix: Fix getPhysfnDev to always allocate memory for physfndev on success,
Eric Blake
[libvirt] [PATCH] Clarify semantics of virDomainMigrate2,
Jiri Denemark
[libvirt] [PATCH] docs: fix network XML documentation,
Laine Stump
[libvirt] [PATCH v2 0/2] Xen: skip xenHypervisor version init in tests,
Philipp Hahn
[libvirt] [RFC PATCH v2 0/2] API to invoke S3/S4 on a host and also resume from within libvirt,
Srivatsa S. Bhat
[libvirt] [PATCH] virNetSocketNewConnectSSH: Escape netcat path too,
Guido Günther
[libvirt] (no subject),
Wayne Sun
[libvirt] [PATCH] [libvirt-tck] vol->as_xml: fix backing store element,
Guido Günther
[libvirt] [PATCH] Fix syntax problem in mingw32-libvirt.spec.in,
Daniel P. Berrange
[libvirt] [PATCH] macvtap: plug memory leak for 802.1Qbh,
Eric Blake
[libvirt] [PATCH] qemu: plug memory leak on migration,
Eric Blake
[libvirt] [PATCH] conf: plug memory leak on error,
Eric Blake
[libvirt] [PATCH] esx: drop dead code to silence Coverity,
Eric Blake
[libvirt] [PATCH] storage: plug memory leak on error,
Eric Blake
[libvirt] How to identify a VirtFS using libvirt,
Richard Maciel
[libvirt] [PATCH] util: Make getaddrinfo failure nonfatal in virGetHostname,
Jiri Denemark
[libvirt] [PATCH] qemu: Make sure BeginJob is always followed by EndJob,
Jiri Denemark
[libvirt] [PATCH] qemu: Log debug messages when changing job,
Jiri Denemark
[libvirt] [PATCH] virFDStream: close also given errfd (fd leak),
Marc-André Lureau
[libvirt] [test-API][PATCH 0/5] Update migrate module,
Wayne Sun
[libvirt] [PATCH] [libvirt-tck] Allow to pass --timer to prove,
Guido Günther
[libvirt] [PATCH] Allow for URI aliases when connecting to libvirt,
Daniel P. Berrange
[libvirt] [libvirt-glib] Don't leak virStreams, take the reference,
Marc-André Lureau
[libvirt] [PATCH] build: fix 'make dist' error,
Wen Congyang
[libvirt] [PATCH] support setting bandwidth from virsh attach-interface,
Hu Tao
[libvirt] [PATCH v2] qemu: Do not reattach PCI device used by other domain when shutdown,
Osier Yang
[libvirt] [PATCH 1/2] Fix occasional container creation failure due to misuse of grantpt,
Serge E. Hallyn
- [libvirt] [PATCH 2/2] Fix type in lxc_controller,
Serge E. Hallyn
- Re: [libvirt] [PATCH 1/2] Fix occasional container creation failure due to misuse of grantpt,
Daniel P. Berrange
- Re: [libvirt] [PATCH 1/2] Fix occasional container creation failure due to misuse of grantpt,
Eric Blake
- Re: [libvirt] [PATCH 1/2] Fix occasional container creation failure due to misuse of grantpt,
Eric Blake
- Re: [libvirt] [PATCH 1/2] Fix occasional container creation failure due to misuse of grantpt,
Serge E. Hallyn
- [libvirt] [PATCH 1/1] lxc: use our own hand-rolled code in place of unlockpt and grantpt,
Serge Hallyn
- Re: [libvirt] [PATCH 1/1] lxc: use our own hand-rolled code in place of unlockpt and grantpt,
Eli Qiao
- Re: [libvirt] [PATCH 1/1] lxc: use our own hand-rolled code in place of unlockpt and grantpt,
Serge E. Hallyn
- Re: [libvirt] [PATCH 1/1] lxc: use our own hand-rolled code in place of unlockpt and grantpt,
Eric Blake
- [libvirt] [PATCH 1/1] lxc: use our own hand-rolled code in place of unlockpt and grantpt (v2),
Serge E. Hallyn
- Re: [libvirt] [PATCH 1/1] lxc: use our own hand-rolled code in place of unlockpt and grantpt (v2),
Eric Blake
- Re: [libvirt] [PATCH 1/1] lxc: use our own hand-rolled code in place of unlockpt and grantpt (v2),
Serge E. Hallyn
- Re: [libvirt] [PATCH 1/1] lxc: use our own hand-rolled code in place of unlockpt and grantpt (v2),
Eric Blake
- Re: [libvirt] [PATCH 1/1] lxc: use our own hand-rolled code in place of unlockpt and grantpt (v2),
Serge E. Hallyn
- Re: [libvirt] [PATCH 1/1] lxc: use our own hand-rolled code in place of unlockpt and grantpt (v2),
Serge E. Hallyn
- Re: [libvirt] [PATCH 1/1] lxc: use our own hand-rolled code in place of unlockpt and grantpt (v2),
Eric Blake
- Re: [libvirt] [PATCH 1/1] lxc: use our own hand-rolled code in place of unlockpt and grantpt (v2),
Serge E. Hallyn
- Re: [libvirt] [PATCH 1/1] lxc: use our own hand-rolled code in place of unlockpt and grantpt (v2),
Daniel P. Berrange
[libvirt] [PATCH] qemu: fix text block info parsing,
Eric Blake
[libvirt] [PATCH] qemu: avoid text monitor null deref,
Eric Blake
[libvirt] [PATCH] qemu: check for json allocation failure,
Eric Blake
[libvirt] [PATCH RESEND] command: avoid fd leak on failure,
Eric Blake
[libvirt] [PATCH RESEND] spec: mingw cleanups,
Eric Blake
[libvirt] [PATCH] build: update to latest gnulib,
Eric Blake
[libvirt] [PATCH] build: add compiler attributes to virUUIDParse,
Eric Blake
[libvirt] [PATCH 3/3] Use virBufferEscapeShell in virNetSocketNewConnectSSH,
Guido Günther
[libvirt] [PATCH 2/3] Add virBufferEscapeShell,
Guido Günther
[libvirt] [PATCH 1/3] Autodetect if the remote nc command supports the -q option,
Guido Günther
[libvirt] [PATCH 0/3] Detect netcat implementation,
Guido Günther
[libvirt] [libvirt PATCHv3 00/10] DHCP snooping support for libvirt,
David L Stevens
- [libvirt] [libvirt PATCHv3 04/10] make default chain policy "DROP",
David L Stevens
- [libvirt] [libvirt PATCHv3 08/10] add DHCP snooping,
David L Stevens
- [libvirt] [libvirt PATCHv3 01/10] support continue/return,
David L Stevens
- [libvirt] [libvirt PATCHv3 07/10] support variable value changing,
David L Stevens
- [libvirt] [libvirt PATCHv3 05/10] allow chain modification,
David L Stevens
- [libvirt] [libvirt PATCHv3 09/10] add leasefile support,
David L Stevens
- [libvirt] [libvirt PATCHv3 06/10] support addRules,
David L Stevens
- [libvirt] [libvirt PATCHv3 10/10] support multiple static IP addresses,
David L Stevens
- [libvirt] [libvirt PATCHv3 03/10] reverse sense of address matching,
David L Stevens
- [libvirt] [libvirt PATCHv3 02/10] allow required ARP packets,
David L Stevens
- Re: [libvirt] [libvirt PATCHv3 00/10] DHCP snooping support for libvirt,
Stefan Berger
[libvirt] [PATCH] [libvirt-perl] Add missing $flags arguments to documentation,
Guido Günther
Re: [libvirt] [PATCH 5/5] qemu/rbd: improve rbd device specification,
Daniel P. Berrange
Re: [libvirt] [PATCH 3/5] qemu: pass virConnectPtr into Domain{Attach, Detach}*,
Daniel P. Berrange
Re: [libvirt] [PATCH 2/5] storage: add authId, authDomain to virDomainDiskDef,
Daniel P. Berrange
Re: [libvirt] [PATCH 1/5] secret: add Ceph secret type,
Daniel P. Berrange
[libvirt] [PATCH 0/3] example: event-test.py,
Philipp Hahn
[libvirt] [PATCH 00/10] Console coruption with two or more clients series,
Peter Krempa
- [libvirt] [PATCH 01/10] fdstream: Emit stream abort callback even if poll() doesnt.,
Peter Krempa
- [libvirt] [PATCH 02/10] virnetclientstream: Propagate stream error messages to callback,
Peter Krempa
- [libvirt] [PATCH 03/10] daemon: Subscribe the stream event callback for error events.,
Peter Krempa
- [libvirt] [PATCH 04/10] fdstream: Add internal function to check if a fdstream is open,
Peter Krempa
- [libvirt] [PATCH 05/10] virsh: fix console stream error reporting,
Peter Krempa
- [libvirt] [PATCH 06/10] Add flags for virDomainOpenConsole,
Peter Krempa
- [libvirt] [PATCH 07/10] virsh: add support for VIR_DOMAIN_CONSOLE_FORCE flag,
Peter Krempa
- [libvirt] [PATCH 08/10] qemu: Add ability to abort existing console while creating new one,
Peter Krempa
- [libvirt] [PATCH 09/10] lxc: Add ability to abort existing console when creating a new one,
Peter Krempa
- [libvirt] [PATCH 10/10] uml: Add ability to abort existing console when creating a new one,
Peter Krempa
- Re: [libvirt] [PATCH 00/10] Console coruption with two or more clients series,
Peter Krempa
- Re: [libvirt] [PATCH 00/10] Console coruption with two or more clients series,
Daniel P. Berrange
[libvirt] [PATCH] qemu: Check for domain being active on successful job acquire,
Michal Privoznik
[libvirt] [PATCH 0/4] Xen fixes,
Philipp Hahn
[libvirt] [PATCH v4 0/2] add blkio.weight_device support,
Hu Tao
[libvirt] [PATCH v3 00/13] Implement keepalive protocol for libvirt RPC,
Jiri Denemark
- [libvirt] [PATCH v3 01/13] Define keepalive protocol,
Jiri Denemark
- [libvirt] [PATCH v3 02/13] Implement common keepalive handling,
Jiri Denemark
- [libvirt] [PATCH v3 03/13] Introduce virConnectSetKeepAlive,
Jiri Denemark
- [libvirt] [PATCH v3 04/13] virsh: Always run event loop,
Jiri Denemark
- [libvirt] [PATCH v3 05/13] Implement keepalive protocol in libvirt daemon,
Jiri Denemark
- [libvirt] [PATCH v3 06/13] Add support for non-blocking calls in client RPC,
Jiri Denemark
- [libvirt] [PATCH v3 07/13] Add support for async close of client RPC socket,
Jiri Denemark
- [libvirt] [PATCH v3 08/13] Implement keepalive protocol in remote driver,
Jiri Denemark
- [libvirt] [PATCH v3 09/13] Introduce virConnectIsAlive API,
Jiri Denemark
- [libvirt] [PATCH v3 10/13] Implement virConnectIsAlive in all drivers,
Jiri Denemark
- [libvirt] [PATCH v3 11/13] Add keepalive support into domain-events examples,
Jiri Denemark
- [libvirt] [PATCH v3 12/13] qemu: Add support for keepalive messages during p2p migration,
Jiri Denemark
- [libvirt] [PATCH v3 13/13] qemu: Cancel p2p migration when connection breaks,
Jiri Denemark
[libvirt] build: fail to 'make distcheck',
Wenyi Gao
[libvirt] Possible security hole? unprivileged user can use virsh to overwrite sensitive system file,
Hong Xiang
[libvirt] [PATCH] build: fix mingw build without sasl,
Eric Blake
[libvirt] [PATCH] build: fix 'make rpm',
Eric Blake
[libvirt] [PATCH] build: fix 'make distcheck',
Eric Blake
[libvirt] [PATCH] build: ship helper scripts,
Eric Blake
[libvirt] [libvirt-glib] The input stream is owned by GVirStream, don't ref it,
Marc-André Lureau
Re: [libvirt] Polling for QEMU 1.0 test day,
Paolo Bonzini
[libvirt] [PATCH] disable xenlight for non-Xen platforms,
Dan Horák
[libvirt] [PATCH] build: Fix VPATH build with new probes,
Jiri Denemark
[libvirt] [PATCH] libvirt-tck: Add testcase to test snapshot functionality.,
Guido Günther
[libvirt] [PATCH v3] Introduce <driver> under <filesystem> to support open-by-handle.,
Harsh Prateek Bora
[libvirt] [PATCH] daemon: Always advertise libvirtd service,
Osier Yang
Re: [libvirt] [PATCH 4/5] buf: implement generic virBufferEscape,
Daniel P. Berrange
[libvirt] [PATCH] Fix storage pool source comparison to avoid comparing with self,
Daniel P. Berrange
[libvirt] [PATCH] Fix handling of stream EOF,
Daniel P. Berrange
Re: [libvirt] RPM build failure on Redhat6,
Wayne Xia
[libvirt] [PATCH] qemu: Get the dev from activePciHostdevs list before reattachment,
Osier Yang
[libvirt] target for documentation,
Jason Helfman
Re: [libvirt] [PATCH v4 2/2] qemu: Implement VIR_DUMP_RESET,
Eric Blake
Re: [libvirt] [PATCH v4 1/2] virDomainCoreDump: Introduce VIR_DUMP_RESET flag,
Eric Blake
[libvirt] [PATCH] docs: fix html bug,
Eric Blake
[libvirt] [PATCH] libvirt-tck: add junit output,
Guido Günther
[libvirt] [PATCH] snapshot: use correct qmp monitor command,
Eric Blake
[libvirt] [PATCH] maint: typo fixes,
Eric Blake
[libvirt] ALERT Virtualization Automatic Builder,
berrange
[libvirt] libvirt changes/certification questions,
Udayan Bapat
[libvirt] [PATCH] add a default event handle, to passthough the new events come from qemu,
shaohef
[libvirt] [PATCH] xen_xs: Guard against set but empty kernel argument,
Guido Guenther
[libvirt] [RFC PATCH 1/5] Add new API virDomainBlockIoThrottle,
Lei Li
[libvirt] [RFC PATCH 0/5] Summary on QEMU I/O throttling support to libvirt,
Lei Li
[libvirt] [PATCH v2] Introduce <driver> under <filesystem> to support open-by-handle.,
Harsh Prateek Bora
[libvirt] [PATCH] events: Propose a separate lock for event queue,
Michal Privoznik
[libvirt] [PATCH] dissectors: Create dissector for Libvirt RPC,
Michal Privoznik
Re: [libvirt] [Qemu-devel] [RFC] Adding new filesystem 'proxy' to 9p,
Markus Armbruster
Re: [libvirt] [PATCH] qemu: Do not reattach PCI device used by other domain when shutdown,
Osier Yang
[libvirt] [v2] storage: Do not use comma as seperator for lvs output,
Osier Yang
Re: [libvirt] [PATCHv2 7/7] snapshot: implement snapshot children listing in qemu,
Daniel Veillard
Re: [libvirt] [PATCHv2 6/7] snapshot: remote protocol for snapshot children,
Daniel Veillard
Re: [libvirt] [PATCHv2 5/7] snapshot: virsh fallback for snapshot-list --descendants --from,
Daniel Veillard
Re: [libvirt] [PATCHv2 4/7] snapshot: virsh fallback for snapshot-list --from children,
Daniel Veillard
Re: [libvirt] [PATCHv2 3/7] snapshot: virsh fallback for snapshot-list --tree --from,
Daniel Veillard
Re: [libvirt] [PATCHv2 2/7] snapshot: virsh snapshot-list and children,
Daniel Veillard
Re: [libvirt] [PATCHv2 1/7] snapshot: new virDomainSnapshotListChildrenNames API,
Daniel Veillard
[libvirt] [PATCH] qemuDomainAttach: Initialize pidfile variable,
Michal Privoznik
[libvirt] New repositories and comments for Code Search,
Richard W.M. Jones
[libvirt] [PATCH] qemu: silence Coverity false positive,
Eric Blake
[libvirt] [PATCH] lxc: fix logic bug,
Eric Blake
[libvirt] [PATCH 0/3] snapshot: another snapshot-list filter,
Eric Blake
[libvirt] [PATCH 0/4] snapshot: optimize qemu relationship traversal,
Eric Blake
[libvirt] [PATCH 1/2] snapshot: sort snapshot-list --tree,
Eric Blake
[libvirt] [RFC PATCH 0/4] powerpc : Libvirt for the PowerPC platform,
Prerna Saxena
[libvirt] [PATCH 0/7] Update systemtap probing,
Daniel P. Berrange
- [libvirt] [PATCH 1/7] Make libvirt.so include the RPC server code,
Daniel P. Berrange
- [libvirt] [PATCH 2/7] If receiving a stream error, mark EOF on the stream,
Daniel P. Berrange
- [libvirt] [PATCH 3/7] Add virSocketRef API to facilitate dynamic probing,
Daniel P. Berrange
- [libvirt] [PATCH 4/7] Refactor TLS to facilitate dynamic probing,
Daniel P. Berrange
- [libvirt] [PATCH 5/7] Fix missing lock calls on virNetTLSContextRef,
Daniel P. Berrange
- [libvirt] [PATCH 6/7] Rewrite all the DTrace/SystemTAP probing,
Daniel P. Berrange
- [libvirt] [PATCH 7/7] Update examples for probing with systemtap,
Daniel P. Berrange
- Re: [libvirt] [PATCH 0/7] Update systemtap probing,
Eric Blake
- <Possible follow-ups>
- Re: [libvirt] [PATCH 0/7] Update systemtap probing,
lvroyce
- Re: [libvirt] [PATCH 0/7] Update systemtap probing,
Smith Brian
[libvirt] [libvirt-tck] Fix labels in SELINUX tests,
Guido Günther
[libvirt] [PATCH] snapshot: fix virsh error message typo,
Eric Blake
Re: [libvirt] [PATCH 0/5 v2] Improve Ceph Qemu+RBD support,
Wido den Hollander
[libvirt] [PATCH] Introduce <driver> under <filesystem> to support open-by-handle.,
Harsh Prateek Bora
[libvirt] [libvirt-glib 00/24] libvirt-gconfig patches,
Christophe Fergeau
- [libvirt] [libvirt-glib 01/23] Add helpers in libvirt-gconfig-helpers.[ch],
Christophe Fergeau
- [libvirt] [libvirt-glib 02/23] gvir_config_object_parse: don't parse empty documents,
Christophe Fergeau
- [libvirt] [libvirt-glib 03/23] Add getters for GVirConfig xmlNode and xmlDoc,
Christophe Fergeau
- [libvirt] [libvirt-glib 04/23] Add GVirConfigObject::node property,
Christophe Fergeau
- [libvirt] [libvirt-glib 05/23] Add GVir::Config::Domain::name property,
Christophe Fergeau
- [libvirt] [libvirt-glib 06/23] Rename gvir_config_domain_new,
Christophe Fergeau
- [libvirt] [libvirt-glib 07/23] Add gvir_config_domain_new to create an empty domain,
Christophe Fergeau
- [libvirt] [libvirt-glib 08/23] Implement gvir_config_domain_set_name,
Christophe Fergeau
- [libvirt] [libvirt-glib 09/23] Make the GVirConfigDomain::name property writable,
Christophe Fergeau
- [libvirt] [libvirt-glib 10/23] Add gvir_config_object_to_xml,
Christophe Fergeau
- [libvirt] [libvirt-glib 11/23] Use gvir_config_object_to_xml,
Christophe Fergeau
- [libvirt] [libvirt-glib 12/23] Add domain creation/parsing test,
Christophe Fergeau
- [libvirt] [libvirt-glib 13/23] Remove GVirConfigObject::docHandle,
Christophe Fergeau
- [libvirt] [libvirt-glib 14/23] Remove xml parsing from gvir_config_*_new functions,
Christophe Fergeau
- [libvirt] [libvirt-glib 15/23] Only do XML parsing when creating config objects,
Christophe Fergeau
- [libvirt] [libvirt-glib 16/23] Remove GError argument from GVirConfigObject::node getter,
Christophe Fergeau
- [libvirt] [libvirt-glib 17/23] Remove GVirConfigObject::doc,
Christophe Fergeau
- [libvirt] [libvirt-glib 18/23] Add gvir_config_object_get_node_content,
Christophe Fergeau
- [libvirt] [libvirt-glib 19/23] Add gvir_config_object_set_node_content,
Christophe Fergeau
- [libvirt] [libvirt-glib 20/23] Add test-domain-duplicate.xml which currently fails,
Christophe Fergeau
- [libvirt] [libvirt-glib 21/23] Validate document in parsing test,
Christophe Fergeau
- [libvirt] [libvirt-glib 22/23] Add GVirConfigDomain::memory,
Christophe Fergeau
- [libvirt] [libvirt-glib 23/23] Add GVirConfigDomain::features,
Christophe Fergeau
- Re: [libvirt] [libvirt-glib 00/24] libvirt-gconfig patches,
Zeeshan Ali (Khattak)
- Re: [libvirt] [libvirt-glib 00/24] libvirt-gconfig patches,
Daniel P. Berrange
[libvirt] [PATCH] virsh: Update the help information for undefine command.,
tangchen
[libvirt] [PATCH 14/7] snapshot: virsh shorthand for operating on current snap,
Eric Blake
[libvirt] [PATCH 0/2] snapshot: allow editing disk-only snapshots,
Eric Blake
Re: [libvirt] [libvirt-glib] API to deal with storage pool(s),
Christophe Fergeau
[libvirt] [PATCH] remote_driver: Avoid double free in EventControl building,
Michal Privoznik
[libvirt] [PATCH] Fail gracefully when hashtables are NULL,
Marc-André Lureau
[libvirt] [PATCH] Make saving domain XML more robust,
Jiri Denemark
[libvirt] [PATCH] Don't send back unknown program errors for async messages,
Daniel P. Berrange
[libvirt] [PATCH] Fix deadlock when the RPC program is unknown,
Daniel P. Berrange
[libvirt] [PATCH 2/2] xenParseXM: don't dereference NULL pointer when script is empty,
Guido Günther
[libvirt] [PATCH 1/2] xen: add error handling to UUID parsing,
Guido Günther
[libvirt] [PATCH] qemu: enable multifunction for older qemu,
Eric Blake
[libvirt] virsh bash completion file,
Serge E. Hallyn
[libvirt] [PATCH] maint: fix minor issues in virterror public header,
Eric Blake
[libvirt] [PATCH 0/4] Add support for QEMU guest agent control,
Daniel P. Berrange
[libvirt] [RFC PATCHv2 0/9] DHCP snooping support for libvirt.,
David L Stevens
[libvirt] [PATCH] qemu: Don't fail virDomainGetInfo if we can't update balloon info,
Jiri Denemark
[libvirt] [PATCH 1.5/2] snapshot: use qemu-img on disks in use at time of snapshot,
Eric Blake
[libvirt] Qemu/KVM guest boots 2x slower with vhost_net,
Reeted
Re: [libvirt] [PATCH 2/2] snapshot: enforce REVERT_FORCE on qemu,
Laine Stump
Re: [libvirt] [PATCH 1/2] snapshot: add REVERT_FORCE to API,
Laine Stump
Re: [libvirt] [RFC PATCH] snapshot: better virsh handling of missing current, parent,
Laine Stump
[libvirt] [PATCH 0/2] qemu: fix disk error_policy problems,
Laine Stump
Re: [libvirt] [RFC] security_dac: don't chown iso file,
Serge E. Hallyn
[libvirt] [PATCH] init: raise default system aio limits,
Eric Blake
[libvirt] [PATCH] build: fix 'make distcheck' with pdwtags installed,
Eric Blake
[libvirt] [PATCH] Make LXC work with new network configuration types,
Daniel P. Berrange
Re: [libvirt] [RFC] Adding new filesystem 'proxy' to 9p,
M. Mohan Kumar
[libvirt] [PATCH] qemu: Fix migration with dname,
Jiri Denemark
[libvirt] [PATCH] network: fill in bandwidth from portgroup for all forward modes,
Laine Stump
[libvirt] question for virsh vcpupin enhancement,
KAMEZAWA Hiroyuki
Re: [libvirt] bug: try to take disk snapshot for LVM2 Volume,
MATSUDA, Daiki
[libvirt] [PATCHv2 13/7] snapshot: implement snapshot children listing in vbox,
Eric Blake
[libvirt] [PATCHv2 12/7] snapshot: implement snapshot roots listing in esx,
Eric Blake
[libvirt] [PATCHv2 11/7] snapshot: optimize vbox snapshot name lookup,
Eric Blake
Re: [libvirt] [PATCH] Add AHCI support to qemu driver,
Adam Litke
[libvirt] [PATCH] Document that ff callbacks need to be invoked from a clean stack,
Guido Günther
[libvirt] [PATCHv2 8/7] snapshot: implement snapshot roots listing in esx,
Eric Blake
[libvirt] [PATCH] Allow passing of command line args to LXC container,
Daniel P. Berrange
[libvirt] [PATCH] Add support for bandwidth filtering on LXC guests,
Daniel P. Berrange
Re: [libvirt] [RFC PATCH] lxc: don't return error on GetInfo when cgroups not yet set up,
Daniel P. Berrange
[libvirt] [PATCH v2 0/2] Allow to make disk optional on migration,
Michal Privoznik
[libvirt] hugepages error: "hugetlbfs filesystem is not mounted",
Shahar Havivi
Re: [libvirt] [PATCH v4 0/2] Allow domain reboot after core dump,
Michal Privoznik
[libvirt] [PATCH] bridge_driver.c: Fix autoconf setting,
Neil Wilson
[libvirt] [RFC PATCH 0/3] Guest NUMA topology support - v0,
Bharata B Rao
Re: [libvirt] [PATCH v2 03/12] Introduce two public APIs for keepalive protocol,
Daniel P. Berrange
Re: [libvirt] [PATCH v2 01/12] Define keepalive protocol,
Daniel P. Berrange
Re: [libvirt] [libvirt-glib] gir: fix introspection of asyncs and array delegate,
Daniel P. Berrange
Re: [libvirt] [libvirt-glib] RFC: delay event handle freeing to avoid dead lock,
Daniel P. Berrange
[libvirt] Comment inconsistency in bridge_driver.c,
Neil Wilson
Re: [libvirt] [Openstack] [RFC PATCH] lxc: don't return error on GetInfo when cgroups not yet set up,
Serge E. Hallyn
[libvirt] [libvirt-glib] [PATCH] Explicitly link conn-test example against libgobject,
Guido Günther
Re: [libvirt] [PATCH 1/2] snapshot: implement getparent for esx,
Matthias Bolte
Re: [libvirt] [PATCH 2/2] snapshot: implement getparent for vbox,
Matthias Bolte
[libvirt] [libvirt-glib] event: remove timeout and handle from arrays,
Marc-André Lureau
[libvirt] [libvirt-glib] Turn GVirStream into a GIO Stream,
Marc-André Lureau
Re: [libvirt] [PATCHv2 2/2] qemu: make PCI multifunction support more manual,
Laine Stump
Re: [libvirt] "Connection does not support host device enumeration",
Kaushal Shriyan
[libvirt] [libvirt-glib] enums: fix incorrect prefix strip,
Marc-André Lureau
[libvirt] [PATCH] Set to NULL members that have been freed to prevent crashes,
Marc-André Lureau
[libvirt] [PATCH] virsh: do not unlink NULL file,
Marc-André Lureau