Re: [Linux-cluster] GFS installation

["Yazan Al-Sheyyab" <yazan ccs com jo>]

hi haydar,

 my friend i was having the same case : which is a two ml 370 hp proliant 
nodes and a shared storage msa500 and the two nodes connected to the shared 
by SCSI cable , the problem was with the lock server when implementing the 
GFS.

im using RHEL_ES_V3_U4 and a GFS for V3 U4 also,  but here in this GFS 
release you have to have an odd number of lock server , i mean that when you 
have two server so you have to have a three lock server , but in my case i 
have used only the first node as lock server and then i reached a poor 
redunduncy in the cluster cause i still studying the purchase of a third 
server., i heared that there is a release of GFS which is GFS 6.1 working 
with RHEL_V4 which will work without the need of the locking service  ..... 
some body correct me if that is not right.

but some body told me that i can use the third lock server as logical not 
physical server  , he meant that i dont need another HardWare like a server

but my question now is there any body on our list can explain me the use of 
the third server as logical way , is it as unix and hp-ux  as an area of the 
disk used for locking or what?

can we manage one of the two cpu on the server as virtual to get a solution 
without another server.

Sorry for the long Email , but we have this last problem.



Regards
-------------------------------------------------

Yazan
---------------------------

----- Original Message ----- 
From: "haydar Ali" <haydar2906 hotmail com>
To: <linux-cluster redhat com>
Sent: Tuesday, July 05, 2005 6:22 PM
Subject: Re: [Linux-cluster] GFS installation


> Hi Igor,
>
> Thanks for this URL.
> My question is: Have I to use 3 nodes to achieve GFS solution?
> We have 2 servers HP Proliant 380 G3 (RedHat Advanced Server 2.1) attached 
> by 2 fiber channels each to the storage area network SAN HP MSA1000 and we 
> want to install and configure GFS to allow 2 servers to simultaneously 
> read and write to a single shared file system (Word documents located into 
> /u04) located on the Storage area network SAN HP MSA1000.
> I read the example that you have sent to me and I see 3 nodes, 2 client 
> nodes share a directory mounted on the 3d server node, but our solution 
> the directory is located in the SAN.
>
> Have you any explanation or ideas for our request?
> Thanks
>
> Haydar
>
>
> > From: Igor <logastellus yahoo com>
> > Reply-To: linux clustering <linux-cluster redhat com>
> > To: linux clustering <linux-cluster redhat com>
> > Subject: Re: [Linux-cluster] GFS installation
> > Date: Thu, 16 Jun 2005 08:33:16 -0700 (PDT)
> >
> > Look at this URL that David suggested to me:
> >
> > http://sources.redhat.com/cgi-bin/cvsweb.cgi/cluster/doc/min-gfs.txt?rev=1.3&content-type=text/x-cvsweb-markup&cvsroot=cluster
> >
> > it's pretty good.
> >
> > --- haydar Ali <haydar2906 hotmail com> wrote:
> >
> > > Hi,
> > >
> > > I'm looking for an installing and configuring
> > > procedure for GFS (examples).
> > > We have 2 servers HP Proliant 380 G3 (RedHat
> > > Advanced Server 2.1) attached
> > > by fiber optic to the storage area network SAN HP
> > > MSA1000 and we want to
> > > install and configure GFS to allow 2 servers to
> > > simultaneously read and
> > > write to a single shared file system (Word documents
> > > located into /u04) on
> > > the SAN.
> > >
> > > Thanks.
> > >
> > > Haydar
> > >
> > >
> > > --
> > > Linux-cluster mailing list
> > > Linux-cluster redhat com
> > > http://www.redhat.com/mailman/listinfo/linux-cluster
> > >
> >
> >
> >
> >
> > __________________________________
> > Discover Yahoo!
> > Stay in touch with email, IM, photo sharing and more. Check it out!
> > http://discover.yahoo.com/stayintouch.html
> >
> > --
> > Linux-cluster mailing list
> > Linux-cluster redhat com
> > http://www.redhat.com/mailman/listinfo/linux-cluster
>
>
> --
> Linux-cluster mailing list
> Linux-cluster redhat com
> http://www.redhat.com/mailman/listinfo/linux-cluster