Re: [linux-lvm] Question about order of drives in a lvm volume

[Heinz Mauelshagen <mauelsha ez-darmstadt telekom de>]

Hello Håkan,

please try "lvdisplay -v /dev/YourVG/YourLV | less" and have a look at the
information about distribution of the volume over the physical volumes.

Tell me if that answers your question.

BTW: if your RAID0 volume is spread over all the disks, you can't remove
     a disk because you can't remove a stripe without destroying the total
     volume.

Regards,
Heinz

> Hello,
> 
> first I'd like to say a big thank you to Heinz for LVM, great work, keep it
> up!
> 
> I have a hopefully simple question:
> 
> I'm using quite a few ide-drives in a raid0 volume (hda -> hdh) and I came
> to think of that it would be good to know in which order I added the drives
> to the volume in case I need to remove one from the volume, is there any way
> I can get the order in which the drives are placed in the raid0 volume? (in
> a list like hda, hdc, hdb, hdg, ... etc)
> 
> Regards,
> 
> Håkan
> 


-- 

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Systemmanagement CS-TS                           T-Nova
                                                 Entwicklungszentrum Darmstadt
Heinz Mauelshagen                                Otto-Roehm-Strasse 71c
Senior Systems Engineer                          Postfach 10 05 41
                                                 64205 Darmstadt
mge EZ-Darmstadt Telekom de                      Germany
                                                 +49 6151 886-425
                                                          FAX-386
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-