[linux-lvm] Re: HELP changing md-device's partition-type to LVM(or may be LV's partition id)
svetljo
galia at st-peter.stw.uni-erlangen.de
Fri Aug 31 08:35:35 UTC 2001
i have forgoten my mail : svetljo at lycos.com
galia at st-peter.stw.uni-erlangen.de
i'll be tankfull for any idea write me
and one more question :
can i make a VG and LV's over LV's
the idea is replacing the linear sofware RAID with a linear LV's, but i
think i'll have the same roblems that i had with the raid
the LV ( lvcreate -i3 -I4 -L26G -nMusic )
the VG -> myData /dev/hdh10 /dev/linVG1/linLV1 /dev/linVG2/linLV2
/dev/hdh10 normal partition 14G
/dev/linVG1/linLV1 -> linear LV 14G /dev/hde6 /dev/hde12
/dev/linVg2/linLV2 -> linear LV 14G /dev/hdg1 /dev/hdg5 /dev/hdg6
/dev/hdg12
> Hi i couldn't change the partition's id of the RAID but i mannaged it
> to create the VG, LV and to format the LV
> but when i try to mount the the LV mount segfaults and every try to
> do anything with the LV finish witth a sleep
> i mean when i try to mount anything ( a partition, a CD or a LV) after
> the segfault of the first ' mount -t xfs /dev/myData/Music /mnt/music
> ' mount goes to sleep and do not do anything
> vgdisplay says that the volume is activ
> lvremove says that the volume is open and can not be removed
> do you have an idea wthat is the problem
> and what can i try
>
> the LV ( lvcreate -i3 -I4 -L26G -nMusic )
>
> the VG -> myData /dev/hdh10 /dev/md6 /dev/md7
>
> /dev/hdh10 normal partition 14G
> /dev/md6 -> linear software RAID 14G /dev/hde6 /dev/hde12
> /dev/md7 -> linear software RAID 14G /dev/hdg1 /dev/hdg5 /dev/hdg6
> /dev/hdg12
>
> the reason:
>
> after trying BeOS, FreeBSD and useing windows , i was trying to switch
> complete to linux without having to repartiton all the drives( i have
> tree )
> and lose about 30G of Data + and a new instalation ( the current Data
> and instalation is over a software RAID-0 other a striped LV's or to
> back up 30 Gigs of Data
> AJ Lewis wrote:
>
>>On Thu, Aug 30, 2001 at 03:26:38PM +0200, svetljo wrote:
>>
>>>Hi i saw your postings on the lvm-board
>>>and i was woundering whether you can help me
>>>
>>>can you plese tell me how can i change the type of 'partition' on
>>>md-device (softweare Linear RAID )
>>>i can not make it with fdisk on md-device
>>>
>>>i have 3 disks with a lot of partitions and i wanted to build striped
>>>LV's on a new VG
>>>i've created the VG ( /dev/md5 /dev/md6 /dev/hdh10 )
>>>but when i try to create LV's it returns to me that not all PV's are
>>>online ( md5 )
>>>and /proc/mdstat tells me that everything is ok :
>>> md5 ( /dev/hde6 /dev/hde12 linear) and md6 (/dev/hdg1 /dev/hdg2
>>>/dev/hdg8 linear) are online
>>>but they are marked as ext2 partitions
>>>
>>>can you please help me
>>>
>>
>>I'm sorry. I don't personally have any experience using md. I suggest you
>>post this to linux-lvm. There should be people there that have done what
>>you're proposing.
>>
>>>linux-2.4.9-xfs-cvs with LVM 1.0.1rc1
>>>
>>
>>Regards,
>>
>
>
More information about the linux-lvm
mailing list