[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

RE: [linux-lvm] 2.4.5 & Adaptec 7890 U2W Controller solved, LVM 0.9.1 b7 FAILS.



Search the lvm-devel mailing list archives for "get_hardblocksize" for the
solution -- you need to change the function call name as the name has
changed.

-----Original Message-----
From: Bas
To: linux-xfs oss sgi com
Cc: linux-lvm sistina com
Sent: 6/6/01 9:18 AM
Subject: [linux-lvm] 2.4.5 & Adaptec 7890 U2W Controller solved, LVM 0.9.1
b7 FAILS.

You're right. Today I downloaded the default kernel coming from
ftp.kernel.org. Patched it using 06042001-xfs-patch. It compiled and it
runs. But when I patch this kernel to 0.9.1 beta 7, (CVS or standard
patch
makes no difference) it fails to compile.

Now this:

drivers/md/mddev.o: In function `__update_hardblocksize':
drivers/md/mddev.o(.text+0x22d6): undefined reference to
`get_hardblocksize'
drivers/md/mddev.o(.text+0x2312): undefined reference to
`get_hardblocksize'
make[1]: *** [kallsyms] Error 1
make: *** [vmlinux] Error 2

How can I fix this.

Thanks again,
Bas.



----- Original Message -----
From: "Joe Krahn" <krahn niehs nih gov>
To: "Timothy Shimmin" <tes boing melbourne sgi com>
Cc: "Bas" <list showme wox org>; <linux-xfs oss sgi com>
Sent: Tuesday, June 05, 2001 3:49 PM
Subject: Re: 2.4.5 & Adaptec 7890 U2W Controller.


> Timothy Shimmin wrote:
> >
> > On Mon, Jun 04, 2001 at 10:02:56PM +0200, Bas wrote:
> > >
> > > From: "J Hayward" <jhayward micron net>
> > > Subject: Re: 2.4.5 & Adaptec 7890 U2W Controller.
> > >
> > > > > [ ]   Build Adapter Firmware with Kernel Build (NEW)
> > > > >
> > > > > It is the last option under Adaptec AIC7xxx support.  The
firmware
> > > > > included in the 2.4.5 release is out of sync with the kernel
driver.
> > > > >
> > > > > I have not done this myself, since my current XFS machine does
not
have
> > > a
> > > > > SCSI controller, but see the below email for more info.
> > > >
> > > > Has anyone had any success using this option? Didn't work for
me.
Problem
> > > > isn't isolated to just the 7890 it seems, I get the same error
on a
> > > Adaptec
> > > > 2930CU. It still produced:
> > > >
> > > > >In interrupt handler - not syncing
> > > >
> > > > I also tried using the old aic7xxx driver, which did load the
module.
> > > However
> > > > it produced a kernel oops immediately after. I don't remember
the
exact
> > > point
> > > > in the boot sequence, I believe it was at "Trying to unmount old
root".
> > >
> > > Tried the firmware option too, but didn't work for me.
> > >
> >
> > Tried the firmware option too, and it did work for me.
> >
> > scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.1.13
> >         <Adaptec 2940 Ultra SCSI adapter>
> >         aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs
> >
> > --Tim
>
>
> The problem is that linux-2.4.5-xfs-05312001.patch.bz2
> includes the files aic7xxx_seq.h and aic7xxx_reg.h which
> are out of date, but which get a newer timestamp. Also
> the binary aicasm/aicasm is included in the patch, but
> patch creates it non-executable. Try touching aic7xxx.seq
> and removing aicasm/aicasm, then rebuilding the
> aic7xxx module with the build-firmware option.
>
> This is actually a problem with "make clean" and
> "make mrproper" not knowing about some of the aic7xxx
> files.
>
> Joe Krahn
>

_______________________________________________
linux-lvm mailing list
linux-lvm sistina com
http://lists.sistina.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]