[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [linux-lvm] Help! unable to mount lv's - can't see why!



On Wed, Sep 18, 2002 at 04:33:05PM +0200, Robin Edgar - Tripany wrote:
> Hi Heinz,
> 
> Thanks for the help so far!
> 
> How can I find out the blocksize of my lv's? So far I've tried e2fsck on the
> lv's using the mke2fs -n /dev/tripserv_vol/pages, for all blocksizes (-b

Oops.
What you wanted to run is "e2fsck -osb=N ..." to repair the existing
filesystem *not* mke2fs, which will create a new one!

As mentioned in my other email: if your logical filesystem blocksize was 4k,
your first superblock backup would have been on block 131072.

Regards,
Heinz    -- The LVM Guy --

> 1024, 2048, 4096) but none of the superblocks respond to fsck. The only
> thing I can think of now is letting fsck rebuild the superblock, but I have
> to be sure of the blocksize for it to have any chance of success. Building
> the lv's, I followed the following steps:
> 
> pvcreate /dev/hde
>   /dev/hdf
>   /dev/hdg
>   /dev/hdh
> 
> vgcreate tripserv_vol /dev/hde /dev/hdf /dev/hdg /dev/hdh
> 
> lvcreate -i3 -I4 -L100M -nvolumename tripserv_vol
> 
> mke2fs -j -Lfslabel /dev/tripserv_vol/volumename
> 
> Cheers,
> Robin
> 
> 
> ----- Original Message -----
> From: "Heinz J . Mauelshagen" <mauelshagen sistina com>
> To: <linux-lvm sistina com>
> Sent: Wednesday, September 18, 2002 3:18 PM
> Subject: Re: [linux-lvm] Help! unable to mount lv's - can't see why!
> 
> 
> > On Wed, Sep 18, 2002 at 02:07:18PM +0200, Robin Edgar - Tripany wrote:
> > > Hi,
> > >
> > > I had 4 (ide) disks in an array (and 1 vg) of which one (hde) broke. As
> I was not too sure of the stability of the system, I decided to do a dd of
> the disk byte by byte to another identical disk. After this was done (with
> loads of sector unreadable errors) I replaced the old disk with the new
> disk, rebooted the system and by all standards all seems well (see below):
> >
> > Robin,
> >
> > lots of read errors during dd likely left you with a corrupted primary
> > superblock of the filesystem.
> >
> > > Unfortunately, only the /dev/tripserv_vol/docu will mount well!
> > > /dev/tripserv_vol/pages gives the following error:
> > >
> > > # mount /dev/tripserv_vol/pages /c
> > > mount: you must specify the filesystem type
> > >
> > > # mount /dev/tripserv_vol/pages /c -t ext3
> > > mount: wrong fs type, bad option, bad superblock on
> /dev/tripserv_vol/pages,
> > >        or too many mounted file systems
> > >
> > > Anyone have any ideas why it won't mount?!
> >
> > You need to figure out, if /dev/tripserv_vol/docu doesn't have *any*
> extents
> > allocated on the replaced disk. Try "lvdisplay -v /dev/tripserv_vol/docu"
> > to achive this. If it has, you'll likely find corrupted files in this one
> > too.
> >
> >
> > For the failing mount you might want to try
> >
> > "mount -r -osb=$ALTERNATE_SUPERBLOCK /dev/tripserv_vol/pages /c".
> >
> > In case you've got a logical 4k block size of the filesystem,
> > ALTERNATE_SUPERBLOCK=131072 would access the first backup copy.
> >
> > See "man mount" and look for the ext2 mount option "sb=" for more
> information.
> >
> > In case you have success with using a backup superblock this way, you need
> to
> > backup all files you can access successfully first, then recreate the
> filesystem
> > and restore. It is unlikely in the case of lots of read errors during dd,
> that
> > a fsck will help you. You'll probably end up with piles of lost+found
> entries.
> >
> > Regards,
> > Heinz    -- The LVM Guy --
> >
> >
> > >
> > > Cheers,
> > > Robin Edgar
> > >
> > > #pvscan:
> > > pvscan -- reading all physical volumes (this may take a while...)
> > > pvscan -- ACTIVE   PV "/dev/hdg1" of VG "tripserv_vol" [38.16 GB / 7.93
> GB free]
> > > pvscan -- ACTIVE   PV "/dev/hdh1" of VG "tripserv_vol" [38.16 GB / 8.01
> GB free]
> > > pvscan -- ACTIVE   PV "/dev/hde1" of VG "tripserv_vol" [55.91 GB / 0
> free]
> > > pvscan -- ACTIVE   PV "/dev/hdf1" of VG "tripserv_vol" [55.91 GB / 3.37
> GB free]
> > > pvscan -- total: 4 [188.16 GB] / in use: 4 [188.16 GB] / in no VG: 0 [0]
> > >
> > > (identical output to before changing the disks around)
> > >
> > > #pvdisplay /dev/hde1
> > > --- Physical volume ---
> > > PV Name               /dev/hde1
> > > VG Name               tripserv_vol
> > > PV Size               55.92 GB [117266625 secs] / NOT usable 4.18 MB
> [LVM: 179 KB]
> > > PV#                   1
> > > PV Status             available
> > > Allocatable           yes (but full)
> > > Cur LV                20
> > > PE Size (KByte)       4096
> > > Total PE              14313
> > > Free PE               0
> > > Allocated PE          14313
> > > PV UUID               KCIKwa-3lvx-k7bj-27ks-hGlI-oZRo-5q7CjM
> > >
> > > (also identical)
> > >
> > > #vgck -v
> > > vgck -- locking logical volume manager
> > > vgck -- finding all volume group(s)
> > > vgck -- checking volume group name "tripserv_vol"
> > > vgck -- checking existence of volume group "tripserv_vol"
> > > vgck -- reading volume group data for "tripserv_vol" from lvmtab
> > > vgck -- checking volume group consistency  of "tripserv_vol" in lvmtab
> > > vgck -- VGDA of "tripserv_vol" in lvmtab is consistent
> > > vgck -- reading volume group data for "tripserv_vol" from physical
> volume(s)
> > > vgck -- checking volume group consistency  of "tripserv_vol" on physical
> volumes
> > > vgck -- VGDA of "tripserv_vol" on physical volumes is consistent
> > > vgck -- unlocking logical volume manager
> > >
> > > # vgdisplay
> > > --- Volume group ---
> > > VG Name               tripserv_vol
> > > VG Access             read/write
> > > VG Status             available/resizable
> > > VG #                  0
> > > MAX LV                255
> > > Cur LV                22
> > > Open LV               1
> > > MAX LV Size           255.99 GB
> > > Max PV                255
> > > Cur PV                4
> > > Act PV                4
> > > VG Size               188.13 GB
> > > PE Size               4 MB
> > > Total PE              48162
> > > Alloc PE / Size       43220 / 168.83 GB
> > > Free  PE / Size       4942 / 19.30 GB
> > > VG UUID               KDiCWx-ae2w-oDnx-Hl5O-Amhd-fIM3-y51bIX
> > >
> > > # vgscan -v
> > > vgscan -- removing "/etc/lvmtab" and "/etc/lvmtab.d"
> > > vgscan -- creating empty "/etc/lvmtab" and "/etc/lvmtab.d"
> > > vgscan -- reading all physical volumes (this may take a while...)
> > > vgscan -- scanning for all active volume group(s) first
> > > vgscan -- found active volume group "tripserv_vol"
> > > vgscan -- reading data of volume group "tripserv_vol" from physical
> volume(s)
> > > vgscan -- inserting "tripserv_vol" into lvmtab
> > > vgscan -- backing up volume group "tripserv_vol"
> > > vgscan -- checking volume group name "tripserv_vol"
> > > vgscan -- checking volume group consistency of "tripserv_vol"
> > > vgscan -- checking existence of "/etc/lvmtab.d"
> > > vgscan -- storing volume group data of "tripserv_vol" in
> "/etc/lvmtab.d/tripserv_vol.tmp"
> > > vgscan -- storing physical volume data of "tripserv_vol" in
> "/etc/lvmtab.d/tripserv_vol.tmp"
> > > vgscan -- storing logical volume data of volume group "tripserv_vol" in
> "/etc/lvmtab.d/tripserv_vol.tmp"
> > > vgscan -- renaming "/etc/lvmtab.d/tripserv_vol.tmp" to
> "/etc/lvmtab.d/tripserv_vol"
> > > vgscan -- removing special files and directory for volume group
> "tripserv_vol"
> > > vgscan -- creating directory and group character special file for
> "tripserv_vol"
> > > vgscan -- creating block device special files for tripserv_vol
> > > vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created
> > > vgscan -- WARNING: This program does not do a VGDA backup of your volume
> group
> > >
> > > #lvscan
> > > lvscan -- ACTIVE   Original "/dev/tripserv_vol/docu" [512 MB] striped[4]
> > > lvscan -- ACTIVE   Original "/dev/tripserv_vol/install" [10 GB]
> striped[4]
> > > lvscan -- ACTIVE   Original "/dev/tripserv_vol/pages" [20 GB] striped[4]
> > > lvscan -- ACTIVE            "/dev/tripserv_vol/gfx" [10 GB] striped[4]
> > > lvscan -- ACTIVE            "/dev/tripserv_vol/sfx" [10 GB] striped[4]
> > > lvscan -- ACTIVE            "/dev/tripserv_vol/people" [20 GB]
> striped[4]
> > > lvscan -- ACTIVE   Original "/dev/tripserv_vol/dim" [2 GB] striped[4]
> > > lvscan -- ACTIVE            "/dev/tripserv_vol/mp3" [20 GB] striped[4]
> > > lvscan -- ACTIVE            "/dev/tripserv_vol/applications" [2 GB]
> striped[4]
> > > lvscan -- ACTIVE   Original "/dev/tripserv_vol/code" [512 MB] striped[4]
> > > lvscan -- ACTIVE            "/dev/tripserv_vol/dumpdir" [10 GB]
> striped[4]
> > > lvscan -- ACTIVE   Original "/dev/tripserv_vol/homes" [10 GB] striped[4]
> > > lvscan -- ACTIVE   Original "/dev/tripserv_vol/info" [5 GB] striped[4]
> > > lvscan -- ACTIVE            "/dev/tripserv_vol/log" [252 MB] striped[3]
> > > lvscan -- ACTIVE            "/dev/tripserv_vol/store" [608 MB]
> striped[4]
> > > lvscan -- ACTIVE   Snapshot "/dev/tripserv_vol/docusnap" [492.19 MB] of
> /dev/tripserv_vol/docu
> > > lvscan -- ACTIVE   Snapshot "/dev/tripserv_vol/installsnap" [9.84 GB] of
> /dev/tripserv_vol/install
> > > lvscan -- ACTIVE   Snapshot "/dev/tripserv_vol/dimsnap" [1.97 GB] of
> /dev/tripserv_vol/dim
> > > lvscan -- ACTIVE   Snapshot "/dev/tripserv_vol/codesnap" [504 MB] of
> /dev/tripserv_vol/code
> > > lvscan -- ACTIVE   Snapshot "/dev/tripserv_vol/pagessnap" [19.69 GB] of
> /dev/tripserv_vol/pages
> > > lvscan -- ACTIVE   Snapshot "/dev/tripserv_vol/infosnap" [4.92 GB] of
> /dev/tripserv_vol/info
> > > lvscan -- ACTIVE   Snapshot "/dev/tripserv_vol/homessnap" [9.84 GB] of
> /dev/tripserv_vol/homes
> > > lvscan -- 22 logical volumes with 168.08 GB total in 1 volume group
> > > lvscan -- 22 active logical volumes
> > >
> > > # lvdisplay /dev/tripserv_vol/docu
> > > --- Logical volume ---
> > > LV Name                /dev/tripserv_vol/docu
> > > VG Name                tripserv_vol
> > > LV Write Access        read/write
> > > LV snapshot status     source of
> > >                        /dev/tripserv_vol/docusnap [active]
> > > LV Status              available
> > > LV #                   1
> > > # open                 1
> > > LV Size                512 MB
> > > Current LE             128
> > > Allocated LE           128
> > > Stripes                4
> > > Stripe size (KByte)    4
> > > Allocation             next free
> > > Read ahead sectors     120
> > > Block device           58:0
> > >
> > > # lvdisplay /dev/tripserv_vol/people
> > > --- Logical volume ---
> > > LV Name                /dev/tripserv_vol/people
> > > VG Name                tripserv_vol
> > > LV Write Access        read/write
> > > LV Status              available
> > > LV #                   6
> > > # open                 0
> > > LV Size                20 GB
> > > Current LE             5120
> > > Allocated LE           5120
> > > Stripes                4
> > > Stripe size (KByte)    4
> > > Allocation             next free
> > > Read ahead sectors     120
> > > Block device           58:5
> > >
> > > # lvdisplay /dev/tripserv_vol/pages
> > > --- Logical volume ---
> > > LV Name                /dev/tripserv_vol/pages
> > > VG Name                tripserv_vol
> > > LV Write Access        read/write
> > > LV snapshot status     source of
> > >                        /dev/tripserv_vol/pagessnap [active]
> > > LV Status              available
> > > LV #                   3
> > > # open                 0
> > > LV Size                20 GB
> > > Current LE             5120
> > > Allocated LE           5120
> > > Stripes                4
> > > Stripe size (KByte)    4
> > > Allocation             next free
> > > Read ahead sectors     120
> > > Block device           58:2
> > >
> > > tripserv:/# lvdisplay /dev/tripserv_vol/pagessnap
> > > --- Logical volume ---
> > > LV Name                /dev/tripserv_vol/pagessnap
> > > VG Name                tripserv_vol
> > > LV Write Access        read only
> > > LV snapshot status     active destination for /dev/tripserv_vol/pages
> > > LV Status              available
> > > LV #                   20
> > > # open                 0
> > > LV Size                20 GB
> > > Current LE             5120
> > > Allocated LE           5120
> > > snapshot chunk size    64 KB
> > > Allocated to snapshot  0.00% [0/19.69 GB]
> > > Allocated to COW-table 320 MB
> > > Stripes                4
> > > Stripe size (KByte)    4
> > > Allocation             next free
> > > Read ahead sectors     120
> > > Block device           58:19
> > >
> > > # lvdisplay /dev/tripserv_vol/docusnap
> > > --- Logical volume ---
> > > LV Name                /dev/tripserv_vol/docusnap
> > > VG Name                tripserv_vol
> > > LV Write Access        read only
> > > LV snapshot status     active destination for /dev/tripserv_vol/docu
> > > LV Status              available
> > > LV #                   16
> > > # open                 0
> > > LV Size                512 MB
> > > Current LE             128
> > > Allocated LE           128
> > > snapshot chunk size    64 KB
> > > Allocated to snapshot  0.05% [256 KB/492.19 MB]
> > > Allocated to COW-table 7.81 MB
> > > Stripes                4
> > > Stripe size (KByte)    4
> > > Allocation             next free
> > > Read ahead sectors     120
> > > Block device           58:15
> > >
> > > So it all looks good!
> >
> > *** Software bugs are stupid.
> >     Nevertheless it needs not so stupid people to solve them ***
> >
> >
> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> =-
> >
> > Heinz Mauelshagen                                 Sistina Software Inc.
> > Senior Consultant/Developer                       Am Sonnenhang 11
> >                                                   56242 Marienrachdorf
> >                                                   Germany
> > Mauelshagen Sistina com                           +49 2626 141200
> >                                                        FAX 924446
> >
> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> =-
> >
> > _______________________________________________
> > linux-lvm mailing list
> > linux-lvm sistina com
> > http://lists.sistina.com/mailman/listinfo/linux-lvm
> > read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html
> >
> >
> 
> 
> 
> _______________________________________________
> linux-lvm mailing list
> linux-lvm sistina com
> http://lists.sistina.com/mailman/listinfo/linux-lvm
> read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html

*** Software bugs are stupid.
    Nevertheless it needs not so stupid people to solve them ***

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Heinz Mauelshagen                                 Sistina Software Inc.
Senior Consultant/Developer                       Am Sonnenhang 11
                                                  56242 Marienrachdorf
                                                  Germany
Mauelshagen Sistina com                           +49 2626 141200
                                                       FAX 924446
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]