[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [linux-lvm] SEGSEGV with vgcreate



I've determined that this was caused by the DAC960 driver when LVM
attempted to open a device that did not exist, which would have been
attached to that controller.  A fixed driver fixed this problem.

Mark

On 14 Aug, To: linux-lvm sistina com wrote:
> Hi, wasn't sure how to report this problem.  I'll run through what I've
> done so far.  I'm running a 2.6.0-test3 kernel using LVM2 2.00.05.  I
> run:
> 
> pvcreate /dev/sde
> dd if=/dev/zero of=/dev/sde bs=1k count=1
> blockdev --rereadpt /dev/sde
> vgcreate log_volume /dev/sde
> 
> I ran strace on vgcreate, and I'll attached the output.  Is there any
> other information I can provide?




[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]