[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

RE: [linux-lvm] LVM problem on MD devices



 Yes, /dev/md/2 is the actual device file (I'm using devfs).

Also, I tested the same with LVM 1.0.8 plus I applied the kernel patches to
1.0.8, - same problem.

Dan

> -----Original Message-----
> From: Jeffrey Layton [mailto:jtlayton poochiereds net] 
> Sent: Wednesday, June 02, 2004 5:55 PM
> To: LVM general discussion and development
> Cc: Dan Bar Dov
> Subject: Re: [linux-lvm] LVM problem on MD devices
> 
> On Wed, 2004-06-02 at 10:44, Dan Bar Dov wrote:
> > I create an MD multipath device, and then a PV on it. 
> > Pvdisplay on the device fails with
> > pvdisplay -- ERROR "pv_read(): pv_create_name_from_kdev_t" no VALID 
> > physical volume "/dev/md/2"
> 
> Just a guess here, but is /dev/md/2 an actual block device 
> file? LVM is picky about symlinks and such...
> -- Jeff
> 
> 

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]