[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

[linux-lvm] LVM drive changed from USB to Firewire



I have an old Dell gx300 with a Maxtor one-touch partitioned using LVM
When I first installed Ubuntu (Breezy Badger), it was detected on usb
and set up very nicely, thank you very much. But I decided that usb
1.0 is way too slow, so I bought a firewire card, which was also
detected very nicely.

The problem is that the drive is not found at boot anymore, and an
error is raised because it can't be mounted. But if I do a vgscan,
then a vgchage -ay, then mount -a, all is well and my volumes are
mounted.

How do I tell LVM to look at the firewire card instead of the usb controller?

TIA
Joel


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]