[linux-lvm] Using LVM with EMC Powerpath...
Allen, Jack
Jack.Allen at McKesson.com
Fri Jun 9 16:34:42 UTC 2006
-----Original Message-----
From: linux-lvm-bounces at redhat.com [mailto:linux-lvm-bounces at redhat.com]
On Behalf Of Gary Mansell
Sent: Friday, June 09, 2006 9:20 AM
To: linux-lvm at redhat.com
Subject: [linux-lvm] Using LVM with EMC Powerpath...
Hi,
I have a powerpath device that I want to encapsulate in LVM so that I
can grow it in the future but when I try and create the physical volume,
I get an error:
[root at ricserver ~]# powermt display dev=emcpowera
Pseudo name=emcpowera
CLARiiON ID=29R231J [Ricardo]
Logical device ID=600601604EC01000E0FC2ED6AAF5DA11 [5FCALRAID5]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0
Owner: default=SP B, current=SP B
========================================================================
======
---------------- Host --------------- - Stor - -- I/O Path - --
Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs
Errors
========================================================================
======
1 lpfc sde SP B0 active alive 0
0
2 lpfc sdi SP A1 active alive 0
0
3 lpfc sdm SP A0 active alive 0
0
4 lpfc sdq SP B1 active alive 0
0
When I try to create the physical volume:
[root at ricserver ~]# pvcreate /dev/emcpowera1
Physical volume "/dev/emcpowera1" successfully created
[root at ricserver ~]# pvscan
Found duplicate PV QwbwqAi02sELEsEpefW6PNZ53XY8Wgo0:
using /dev/emcpowera1 not /dev/sdq1
Found duplicate PV QwbwqAi02sELEsEpefW6PNZ53XY8Wgo0: using /dev/sde1
not /dev/sdq1
Found duplicate PV QwbwqAi02sELEsEpefW6PNZ53XY8Wgo0: using /dev/sdi1
not /dev/sdq1
Found duplicate PV QwbwqAi02sELEsEpefW6PNZ53XY8Wgo0: using /dev/sdm1
not /dev/sdq1
PV /dev/sda2 VG VolGroup00 lvm2 [33.75 GB / 32.00 MB free]
PV /dev/sdq1 lvm2 [266.42 GB]
Total: 2 [300.17 GB] / in use: 1 [33.75 GB] / in no VG: 1 [266.42 GB]
What am I doing wrong?
Any help gladly recieved
Regards
Gary Mansell
====================
Depending on the Linux version you are using, look at /etc/lvm/lvm.conf
and do man on lvm.conf. Basically you need to exclude the /dev/sd*
entries so the various LVM commands will not look at them. They will
only look at the emcpower* names.
Jack Allen
More information about the linux-lvm
mailing list