[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [linux-lvm] Large disk problem with LVM2...



Thanks Bryn for getting back to me.

Here is the information you requested... I see that it is indeed a MSDos partition table... I've done a quite google search, but I can't find out how to convert it over to a GPT Partition table... Can you please help me with that or can it even be done (without erasing all the data)

Thanks,
 --Greg

======================

[root bill ~]# fdisk -l /dev/sda

Disk /dev/sda: 3499.8 GB, 3499890573312 bytes
255 heads, 63 sectors/track, 425504 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

  Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1          13      104391   83  Linux
/dev/sda2              14       13067   104856255   8e  Linux LVM
/dev/sda3           13068      158155  1165416554+  8e  Linux LVM
[root bill ~]# parted /dev/sda p

Model: Promise 14+2 Disk RAID6 (scsi)
Disk /dev/sda: 3500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      32.3kB  107MB   107MB   primary  ext3         boot
2 107MB 107GB 107GB primary lvm 3 107GB 1301GB 1193GB primary lvm Information: Don't forget to update /etc/fstab, if necessary.
[root bill ~]# cat /proc/partitions
major minor  #blocks  name

  8     0 3417861888 sda
  8     1     104391 sda1
  8     2  104856255 sda2
  8     3 1165416554 sda3
253     0   40960000 dm-0
253     1   59768832 dm-1
253     2    4096000 dm-2
253     3  167772160 dm-3
253     4  314572800 dm-4
253     5  524288000 dm-5
253     6  104857600 dm-6


--Greg

Bryn M. Reeves wrote:
Greg Varga wrote:
device-mapper: table: device 8:3 too small for target
device-mapper: table: 253:7: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table

How was the underlying device (sda) partitioned? For a device this large, you'll need to use a GPT partition table, rather than the traditional MSDOS MBR. Some versions of tools may allow you to create large partitions on MSDOS which later cause problems, since the MSDOS format is limited to 2TiB addressing.

The output of "fdisk -l /dev/sda" and "parted /dev/sda p", as well as the content of /proc/partitions would help to confirm if this is the problem.

Anyone have any ideas why pvs shows the DevSize of 1.09TB?

There have been some cosmetic bugs that caused the wrong device sizes to be reported, but this doesn't look like one of those cases - since you're getting errors from the kernel when mapping LVs onto the
device, it really does appear that it's not as big as we're expecting.

Regards,
Bryn.

--
----------------------------------------------------------------------
Greg Varga
Systems Engineer & Development

Skyway West
 Phone: (604) 482-1128
 Email: gvarga skywaywest com
 WebSite: www.skywaywest.com
----------------------------------------------------------------------

This communication contains confidential information intended only for the person to whom it is addressed. Any unauthorized disclosure, copying, other distribution of this communication or taking any action on its contents is strictly prohibited. If you have received this message in error, please notify immediately and delete this message without reading, copying or forwarding it to anyone.



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]