[Ovirt-devel] ovirt see only 1 node. how to add other servers ?

[Perry Myers]

�� wrote:
> After destroy ovirt-appliance file system produce a lot of errors

Did you shut down the appliance first using shutdown -h now from the 
appliance console or an ssh session before running virsh destroy?  virsh 
destroy is equivalent to pulling the power plug out of a computer. 
Generally with ext3 filesystems that should not result in disk corruption, 
but it's always safer to shutdown the OS using virsh shutdown or using 
shutdown from within the guest.

> I boot second real node from cobbler on ovirt-appliance but it is not
> appear in list 
> second node have adress 192.168.50.254 - is this network for
> administrative message or 192.168.1222/24 ?

Not sure what you're asking here.

Let me summarize what I understand of your situation.

You have the ovirt-appliance running on a physical host.  It is bridged to 
an external network (using create-ovirt-appliance -e ethX).

You have a second physical machine on the same network as ethX from the 
above command.

You PXE boot the second physical machine and see the oVirt Node boot on 
that machine, but you never see the node appear in the hosts tab on the 
oVirt web interface.

Is my understanding correct?

If so, can you please send me a tarball with all of the logs on the 
appliance in /var/log and also a tarball of all of the logs on the Node in 
/var/log.

Thanks,

Perry