[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: LILO Conf



At 09:34 PM 12/2/97 +0000, you wrote:
>
> label=linux
> image=/boot/vmlinuz
> root=/dev/hda2
> read-only
> label=dos
> other=/dev/hda1
> table=/dev/hda
>
>
>The other problem could be where root is on /dev/hda2. Keep in mind that
>the root partition MUST be within the first 1024 cylinders of the disk.
>If any part of / goes beyond 1024 cylinders, all bets are off. That is
>why I have separate disks for Windoze95 and Linux.
>
>In any event, I need to look at mine to really know for sure.

I tried the above configuration and it didn't work either. As for the cylinder issue, my drive is only 1.3 Gig so the root partition is well within the 1024 ceiling.

Oh well, I hope you find the solution at your other computer.

Thx.


--Gardy--
___________________________________________________

Edgardo I. Nazario
Technical Manager
edgardo real com

Real
Networks
, Inc.
http://www.Real.com
Direct Line: 206-674-2381
Fax: 206-674-2698
___________________________________________________


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]