[Date Prev][Date Next] [Thread Prev][Thread Next]
[Thread Index]
[Date Index]
[Author Index]
Re: Installation Problems..please help..it's URGENT!
- From: "Werner Kliewer" <Werner_Kliewer MPIC mb ca>
- To: <redhat-install-list redhat com>
- Subject: Re: Installation Problems..please help..it's URGENT!
- Date: Thu, 27 Nov 1997 17:32:25 -0600
Per,
You say in some of your other posts that you cannot change the IRQ's of the
SCSI controllers. You should still be able to change the IRQ of the network
card. If that is what you did to get linux working, but then have to change
it back for Win95/NT etc., Try this. Change it to the appropriate IRQ for
Linux. Then delete all references to it and all drivers for it from
Win95/NT. Then let them re-discover the card (or even add it in manually)
with the new IRQ setting. All systems should be able to use the new IRQ.
----------
> From: Per Kristiansen <perk crb oslo no>
> Newsgroups: linux.redhat.install
> Subject: Installation Problems..please help..it's URGENT!
> Date: Wednesday, November 26, 1997 4:49 PM
>
> Hi..
>
> I'm testing the new HP Kayak PC's with Linux RedHat 4.2 and have bumped
> into some problems:
>
> but first some data:
>
> Hardware:
>
> HP KAYAK XU Dual P2-300 64Mb ram
> 1 Adaptec 7860 v1.32S2HP(onboard)
> 1 Adaptec 7880 v1.32S2HP(onboard)
> 1 AMD 79C970 Lance Net
> 1 Matrox II AGP 4Mb
>
> MotherBoard:
> HP's Own
>
> BIOS:
> PhoenixBios 4.0 Release 6.0.
> BIOS version:HB.11.07US
>
>
> Software:
> Redhat 4.2 with kernel 2.0.32
>
> Startup:
> Found PCnet/PCI at 0xfca0, irq 11
> eth0: PCnet (unknown) at 0xfca0 00 60 b0 a1 9c b5 assigned IRQ 11, no DMA
> needed
> lance.c:v1.09 Aug 20 1996 dplatt 3do com, becker cesdis gsfc nasa gov
>
> Then the 7860 reports:
> IRQ 10
>
> Then the 7880 reports
> IRQ 11 (same as net card)
>
>
> Problem:
> No matter what kind of PCI netcard I try , the same allways happens:
> one or both the SCSI cards conflicts with the NIC.
> Causing the NIC to go bananas! You can see it but you can't DO anything
> with it. Kinda sad really :)
>
> If I put in a old'n trusty NE2000 card, and rip out the PCI NIC,
everything
> works, but I MUST get it to work with a 100Mb card, and the last time I
> checked , there were mighty few ISA 100Mb cards ;)
>
> so to put it short...
> HELP!!!!!
>
>
> Per Kristiansen
> Elisenbergvn 20.
> 0265 Oslo
> Tlf:22 444 159
> Mob::900 57895
>
>
> --
> PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST
ARCHIVES!
> http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips
/mailing-lists
> To unsubscribe: mail redhat-install-list-request redhat com
> with "unsubscribe" as the Subject.
>
>
[Date Prev][Date Next] [Thread Prev][Thread Next]
[Thread Index]
[Date Index]
[Author Index]