Re: rh5.0 can't find Intel Lan adapter

[Dan Cyr <dan VALLEYNET BC CA>]

Choose the Etherexpress Pro;
Specify options;
irq=9 io=0x???

??? = whatever your it set at. eg. 300 or 320

If you plan on using a sound card in your system, I suggest you set the IRQ
to 10 or 11. Of course you know how to do that with the dos drivers. =)

Should work sweetly after that. I have quite afew of these cards and 'love'
them.


Dan


At 09:51 PM 4/2/98 -0500, Jim Weathers wrote:
>Hi:
>
>After going through the HOW-TO's, I've at least determined
>that my ethernet card should be supported.
>
>RH 5.0 install (not an upgrade) can't find my Intel
>EtherExpress PRO/10+ ISA LAN adapter.  According to
>Linux Ethernet-Howto: Vendor/Manufacturer/Model Specific Information
><http://sunsite.unc.edu/LDP/HOWTO/Ethernet-HOWTO-5.html#card-intro>
>this card should be supported as a EtherExpress PRO/100.
>
>When I run the Intel diagnostics under DOS, the card is there,
>and reports at IRQ 9.  At this point I am at a loss as to what
>to do.
>
>Any suggestions would be appreciated.
>
>thanks,
>Jim.
>
>Jim Weathers                     weather intrex net
>N4RSE