Re: Ping fails on eth0

["A. Benjamin" <postbox new-wen net>]

Do I add 2 lines for two different cards in the /lilo.conf ?
I had one line added, but it still didn't work.
Do I type the line as: cat /proc/modules or lsmod
or you mean this :cat /proc/modules or that: cat /proc/lsmod ?

----- Original Message -----
From: Ridhwan <rizwan clovertechnologies com>
To: <redhat-install-list redhat com>
Cc: <ans clover prv>
Sent: Monday, June 26, 2000 12:41 PM
Subject: Re: Ping fails on eth0


>
> Try this,
> cat /proc/ioports # Check ioports
> cat /proc/interrupts # Check irq clashes if any.
> cat /proc/modules or lsmod .# See if proper modules for each card is
> loaded
>
> BTW have u added an append="ether=<ioports>,<irq>, eth1" in your
> /etc/lilo.conf.
>
> Rizwan
>
> On Sun, 25 Jun 2000, A. Benjamin wrote:
> >
> > I finally after several days was able to get two ethernet cards to be
recognize by my linux box with 5.2 (Apollo version).
> One is a SMC-Ultra and the other Micronet Fast Ehternet. The local host
pings
> with no problem. Great! The eth1 pings with no problem. Great! However,
eth0
> does not display packets being transmitted and reports a 100% packet loss
once
> I end the Pinging. All show up when I issue the command ifconfig or dmesg.
I
> have looked in lilo.conf and conf.modules to make sure everthing.
Everthing
> looks fine. I am thinking maybe the assigned IRQs and I/O is conflicting.
Are
> there any suggestions? >
>
> ----------------------------------------
> Content-Type: text/html; name="unnamed"
> Content-Transfer-Encoding: quoted-printable
> Content-Description:
> ----------------------------------------
>
>
> --
> To unsubscribe: mail redhat-install-list-request redhat com with
> "unsubscribe" as the Subject.
>
>