RE: Routing Problems

["Tanner, Robby" <TANNER Wardrop com>]

Also, pinging through a firewall, from any machine other than the firewall,
is more involved than most people think.

> -----Original Message-----
> From:	Yehuda Feinsilber [SMTP:yehuda feinzilber com]
> Sent:	Friday, March 24, 2000 5:19 PM
> To:	redhat-install-list redhat com
> Subject:	RE: Routing Problems
> 
> Line #3 you have 198.168..... instead of 192.168.....
>  
> Yehuda Feinsilber
> 
> 	-----Original Message-----
> 	From: Ed Kellogg [mailto:crazyed sunlink net]
> 	Sent: Saturday, March 25, 2000 1:07 AM
> 	To: redhat-install-list redhat com
> 	Subject: Routing Problems
> 	
> 	
> 	 
> 	 
> 	Hi all,
> 	 
> 	I am having a routing problem that I can't seem to figure out.
> 	 
> 	The problem : I have 2 NIC's connected to my network the eth0 goes
> to my private network and eth1 goes to my ISP
> 	 
> 	I can ping to the ISP from the local host so I know the network card
> is ok. I cannot ping to the ISP from the local network.
> 	I can ping the eth1 network card from the private network.
> 	 
> 	I have ip forwarding on and routed running with RedHat 6.1. 
> 	Kernel IP routing table
> 	Destination            Gateway                      Genmask
> Flags     Metric Ref    Use Iface
> 	207.103.111.154       *                              255.255.255.255
> UH           0      0       0    eth1
> 	207.103.111.153      *                              255.255.255.255
> UH           0      0       0    eth1
> 	198.168.0.5              *
> 255.255.255.255    UH           0      0       0    eth0
> 	207.103.111.152    207.103.111.154          255.255.255.248    UG
> 0      0       0    eth1
> 	207.103.111.152       *                              255.255.255.248
> U             0      0       0    eth1
> 	192.168.0.0         192.168.0.5                  255.255.255.0
> UG           0      0       0    eth0
> 	192.168.0.0              *
> 255.255.255.0      U             0      0       0   eth0
> 	127.0.0.0                  *                             255.0.0.0
> U              0      0        0  lo
> 	default                  207.103.111.153            0.0.0.0
> UG            0      0        0  eth1
> 	 
> 	 
> 	Any suggestions/solutions on how to solve this problem??
> 	 
> 	 
> 	Thanks in advance
> 	Ed
> 	 
> 	 
> 
> 	 
>