[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Cable Modem Blues...



Hello,
The etho: Lite-On 82C168 is correct. It's the same message I get with my
Linksys LNE100TX cards. The IRQ 0 isn't right though.
The MII transceiver message is the same as mine also.
I have 3 boxes networked with Linksys 10/100 cards, 1 win box, 1 RH6.1 box and
one dual boot box. with a 10/100 autosensing hub. Works fine with Samba and
Win98 networking.
I had cable modem for a few months and was sharing it. Wasn't really impressed
with it. I'm waiting on asdl.
Can you ping and telnet to the other boxes?
Any other pertinent info in /var/log/messages?

Laterz,
<<zank>>


  On Thu, 27 Apr 2000,
Bennie L. Caldwell wrote: > I didn't see eth0 comming up in /var/log/boot.log
for my hostname. > I checked /var/log/messages and found:
> 
>  Apr 27 10:23:24 Hstname kernel: eth0: Lite-On 82c168 PNIC at 0x1400, 00 a0
> cc 28 52 cd, IRQ 0.
>  Apr 27 10:23:24 Hstname kernel: eth0: MII transceiver found at MDI0 address
> 1, config 3100 status 7829.
> 
> This doesn't look like my ethernet card. Is there anyway I can determine
> what the card address is?
> 
> 
> 
> Bennie
> 
> 
> 
> 
> ----- Original Message -----
> From: "Karl Pearson" <karlp colubs com>
> To: "Bennie L. Caldwell" <bennie-caldwell home com>
> Sent: Thursday, April 27, 2000 1:40 PM
> Subject: Re: Cable Modem Blues...
> 
> 
> > Check /var/log/boot.log for eth0 and see if it comes up okay during the
> > bootup, unless you watch closely and see it coming up. It should if the
> > card is working.  Also check /var/log/messages and see if there's a line
> > that says something like:
> >
> > Apr 27 10:23:24 Hstname kernel: eth0: NE2000 found at 0x300, using IRQ 9.
> >
> > That's what comes up on my box.
> >
> > If there are errors there, you can probably deduce why it's failing by
> > seeing what the message says.
> >
> > Karl L. Pearson
> > Senior uniVerse Database Analyst
> > Senior Unix/NT/Win Analyst
> > karlp colubs com
> >
> 
> 
> 
> -- 
> To unsubscribe: mail redhat-install-list-request redhat com with
> "unsubscribe" as the Subject.



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]