[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Cable Modem Blues...



I tried to ping my other computer and got "network is unreachable".

This is the output from my  /var/log/messages after I log on as root.

May  3 00:24:13 cj49180-a syslogd 1.3-3: restart.
May  3 00:24:13 cj49180-a syslog: syslogd startup succeeded
May  3 00:24:13 cj49180-a kernel: klogd 1.3-3, log source = /proc/kmsg
started.
May  3 00:24:13 cj49180-a kernel: Inspecting /boot/System.map-2.2.12-20
May  3 00:24:13 cj49180-a syslog: klogd startup succeeded
May  3 00:24:13 cj49180-a kernel: Loaded 6865 symbols from
/boot/System.map-2.2.12-20.
May  3 00:24:13 cj49180-a kernel: Symbols match kernel version 2.2.12.
May  3 00:24:13 cj49180-a kernel: Loaded 2 symbols from 1 module.
May  3 00:24:13 cj49180-a kernel: Linux version 2.2.12-20
(root porky devel redhat com) (gcc version egcs-2.91.66 19990314/Linux
(egcs-1.1.2 release)) #1 Mon Sep 27 10:40:35 EDT 1999
May  3 00:24:13 cj49180-a kernel: Detected 400916775 Hz processor.
May  3 00:24:13 cj49180-a kernel: Console: colour VGA+ 80x25
May  3 00:24:13 cj49180-a kernel: Calibrating delay loop... 399.77 BogoMIPS
May  3 00:24:13 cj49180-a kernel: Memory: 95164k/98240k available (1008k
kernel code, 412k reserved, 1312k data, 64k init)
May  3 00:24:13 cj49180-a kernel: DENTRY hash table entries: 262144 (order:
9, 2097152 bytes)
May  3 00:24:13 cj49180-a kernel: Buffer-cache hash table entries: 131072
(order: 7, 524288 bytes)
May  3 00:24:13 cj49180-a kernel: Page-cache hash table entries: 32768
(order: 5, 131072 bytes)
May  3 00:24:13 cj49180-a kernel: VFS: Diskquotas version dquot_6.4.0
initialized
May  3 00:24:13 cj49180-a kernel: CPU: Intel Pentium II (Deschutes) stepping
02
May  3 00:24:13 cj49180-a kernel: Checking 386/387 coupling... OK, FPU using
exception 16 error reporting.
May  3 00:24:13 cj49180-a kernel: Checking 'hlt' instruction... OK.
May  3 00:24:13 cj49180-a kernel: POSIX conformance testing by UNIFIX
May  3 00:24:13 cj49180-a kernel: mtrr: v1.35a (19990819) Richard Gooch
(rgooch atnf csiro au)
May  3 00:24:13 cj49180-a kernel: PCI: PCI BIOS revision 2.10 entry at
0xfd9b4
May  3 00:24:13 cj49180-a kernel: PCI: Using configuration type 1
May  3 00:24:13 cj49180-a kernel: PCI: Probing PCI hardware
May  3 00:24:13 cj49180-a kernel: PCI: Enabling I/O for device 00:3a
May  3 00:24:13 cj49180-a kernel: PCI: Enabling I/O for device 00:50
May  3 00:24:13 cj49180-a kernel: PCI: Enabling memory for device 00:50
May  3 00:24:13 cj49180-a kernel: PCI: Enabling I/O for device 00:60
May  3 00:24:13 cj49180-a kernel: PCI: Enabling memory for device 00:61
May  3 00:24:13 cj49180-a kernel: PCI: Enabling memory for device 00:62
May  3 00:24:13 cj49180-a kernel: Linux NET4.0 for Linux 2.2
May  3 00:24:13 cj49180-a kernel: Based upon Swansea University Computer
Society NET3.039
May  3 00:24:13 cj49180-a kernel: NET4: Unix domain sockets 1.0 for Linux
NET4.0.
May  3 00:24:13 cj49180-a kernel: NET4: Linux TCP/IP 1.0 for NET4.0
May  3 00:24:13 cj49180-a kernel: IP Protocols: ICMP, UDP, TCP, IGMP
May  3 00:24:13 cj49180-a kernel: TCP: Hash tables configured (ehash 131072
bhash 65536)
May  3 00:24:13 cj49180-a kernel: Initializing RT netlink socket
May  3 00:24:13 cj49180-a kernel: Starting kswapd v 1.5
May  3 00:24:13 cj49180-a kernel: Detected PS/2 Mouse Port.
May  3 00:24:13 cj49180-a kernel: Serial driver version 4.27 with MANY_PORTS
MULTIPORT SHARE_IRQ enabled
May  3 00:24:13 cj49180-a kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
May  3 00:24:13 cj49180-a kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
May  3 00:24:13 cj49180-a kernel: pty: 256 Unix98 ptys configured
May  3 00:24:13 cj49180-a kernel: apm: BIOS version 1.2 Flags 0x03 (Driver
version 1.9)
May  3 00:24:13 cj49180-a kernel: Real Time Clock Driver v1.09
May  3 00:24:13 cj49180-a kernel: RAM disk driver initialized:  16 RAM disks
of 96000K size
May  3 00:24:13 cj49180-a kernel: PIIX4: IDE controller on PCI bus 00 dev 39
May  3 00:24:13 cj49180-a kernel: PIIX4: not 100% native mode: will probe
irqs later
May  3 00:24:13 cj49180-a kernel:     ide0: BM-DMA at 0x1050-0x1057, BIOS
settings: hda:pio, hdb:DMA
May  3 00:24:13 cj49180-a kernel:     ide1: BM-DMA at 0x1058-0x105f, BIOS
settings: hdc:pio, hdd:pio
May  3 00:24:13 cj49180-a kernel: hda: QUANTUM BIGFOOT TS12.7A, ATA DISK
drive
May  3 00:24:13 cj49180-a kernel: hdb: Maxtor 91366U4, ATA DISK drive
May  3 00:24:13 cj49180-a kernel: hdc: CRD-8322B, ATAPI CDROM drive
May  3 00:24:13 cj49180-a kernel: hdd: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY
drive
May  3 00:24:13 cj49180-a kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
May  3 00:24:13 cj49180-a kernel: ide1 at 0x170-0x177,0x376 on irq 15
May  3 00:24:13 cj49180-a kernel: hda: QUANTUM BIGFOOT TS12.7A, 12243MB
w/418kB Cache, CHS=1658/240/63
May  3 00:24:13 cj49180-a kernel: hdb: Maxtor 91366U4, 13029MB w/2048kB
Cache, CHS=1764/240/63
May  3 00:24:13 cj49180-a kernel: hdc: ATAPI 32X CD-ROM drive, 128kB Cache
May  3 00:24:13 cj49180-a kernel: Uniform CDROM driver Revision: 2.56
May  3 00:24:13 cj49180-a kernel: Floppy drive(s): fd0 is 1.44M
May  3 00:24:13 cj49180-a kernel: FDC 0 is a post-1991 82077
May  3 00:24:13 cj49180-a kernel: md driver 0.90.0 MAX_MD_DEVS=256,
MAX_REAL=12
May  3 00:24:13 cj49180-a kernel: raid5: measuring checksumming speed
May  3 00:24:13 cj49180-a kernel: raid5: MMX detected, trying high-speed MMX
checksum routines
May  3 00:24:13 cj49180-a kernel:    pII_mmx   :   891.159 MB/sec
May  3 00:24:13 cj49180-a kernel:    p5_mmx    :   935.736 MB/sec
May  3 00:24:13 cj49180-a kernel:    8regs     :   688.467 MB/sec
May  3 00:24:13 cj49180-a kernel:    32regs    :   385.953 MB/sec
May  3 00:24:13 cj49180-a kernel: using fastest function: p5_mmx (935.736
MB/sec)
May  3 00:24:13 cj49180-a kernel: scsi : 0 hosts.
May  3 00:24:13 cj49180-a kernel: scsi : detected total.
May  3 00:24:13 cj49180-a kernel: md.c: sizeof(mdp_super_t) = 4096
May  3 00:24:13 cj49180-a kernel: Partition check:
May  3 00:24:13 cj49180-a kernel:  hda: hda1
May  3 00:24:13 cj49180-a kernel:  hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 hdb8 >
May  3 00:24:13 cj49180-a kernel: RAMDISK: Compressed image found at block 0
May  3 00:24:13 cj49180-a kernel: autodetecting RAID arrays
May  3 00:24:13 cj49180-a kernel: autorun ...
May  3 00:24:13 cj49180-a kernel: ... autorun DONE.
May  3 00:24:13 cj49180-a kernel: VFS: Mounted root (ext2 filesystem).
May  3 00:24:13 cj49180-a kernel: autodetecting RAID arrays
May  3 00:24:13 cj49180-a kernel: autorun ...
May  3 00:24:13 cj49180-a kernel: ... autorun DONE.
May  3 00:24:13 cj49180-a kernel: VFS: Mounted root (ext2 filesystem)
readonly.
May  3 00:24:13 cj49180-a kernel: change_root: old root has d_count=1
May  3 00:24:13 cj49180-a kernel: Trying to unmount old root ... okay
May  3 00:24:13 cj49180-a kernel: Freeing unused kernel memory: 64k freed
May  3 00:24:13 cj49180-a kernel: Adding Swap: 105800k swap-space
(priority -1)
May  3 00:24:13 cj49180-a kernel: tulip.c:v0.89H 5/23/98
becker cesdis gsfc nasa gov
May  3 00:24:13 cj49180-a kernel: eth0: Lite-On 82c168 PNIC at 0x1400, 00 a0
cc 28 52 cd, IRQ 0.
May  3 00:24:13 cj49180-a kernel: eth0:  MII transceiver found at MDIO
address 1, config 3100 status 7829.
May  3 00:24:13 cj49180-a atd: atd startup succeeded
May  3 00:24:14 cj49180-a crond: crond startup succeeded
May  3 00:24:14 cj49180-a rc: Starting pcmcia succeeded
May  3 00:24:14 cj49180-a inet: inetd startup succeeded
May  3 00:24:14 cj49180-a lpd: lpd startup succeeded
May  3 00:24:14 cj49180-a keytable: Loading keymap:
May  3 00:24:14 cj49180-a keytable: Loading
/usr/lib/kbd/keymaps/i386/qwerty/us.kmap.gz
May  3 00:24:15 cj49180-a keytable: Loading system font:
May  3 00:24:15 cj49180-a rc: Starting keytable succeeded
May  3 00:24:15 cj49180-a sendmail: sendmail startup succeeded
May  3 00:24:15 cj49180-a gpm: gpm startup succeeded
May  3 00:24:16 cj49180-a xfs: xfs startup succeeded
May  3 00:24:16 cj49180-a linuxconf: Linuxconf final setup
May  3 00:24:16 cj49180-a xfs: Warning: The directory
"/usr/X11R6/lib/X11/fonts/100dpi" does not exist.
May  3 00:24:16 cj49180-a xfs:          Entry deleted from font path.
May  3 00:24:17 cj49180-a rc: Starting linuxconf succeeded
May  3 00:24:51 cj49180-a PAM_pwdb[530]: (login) session opened for user
root by LOGIN(uid=0)




Bennie
"Scott A. Zanke" <szanke america net> wrote in message
news:00043020280000 27694 mango   
> Hello,
> The etho: Lite-On 82C168 is correct. It's the same message I get with my
> Linksys LNE100TX cards. The IRQ 0 isn't right though.
> The MII transceiver message is the same as mine also.
> I have 3 boxes networked with Linksys 10/100 cards, 1 win box, 1 RH6.1 box
and
> one dual boot box. with a 10/100 autosensing hub. Works fine with Samba
and
> Win98 networking.
> I had cable modem for a few months and was sharing it. Wasn't really
impressed
> with it. I'm waiting on asdl.
> Can you ping and telnet to the other boxes?
> Any other pertinent info in /var/log/messages?
>
> Laterz,
> <<zank>>
>
>
>   On Thu, 27 Apr 2000,
> Bennie L. Caldwell wrote: > I didn't see eth0 comming up in
/var/log/boot.log
> for my hostname. > I checked /var/log/messages and found:
> >
> >  Apr 27 10:23:24 Hstname kernel: eth0: Lite-On 82c168 PNIC at 0x1400, 00
a0
> > cc 28 52 cd, IRQ 0.
> >  Apr 27 10:23:24 Hstname kernel: eth0: MII transceiver found at MDI0
address
> > 1, config 3100 status 7829.
> >
> > This doesn't look like my ethernet card. Is there anyway I can determine
> > what the card address is?
> >
> >
> >
> > Bennie
> >
> >
> >
> >
> > ----- Original Message -----
> > From: "Karl Pearson" <karlp colubs com>
> > To: "Bennie L. Caldwell" <bennie-caldwell home com>
> > Sent: Thursday, April 27, 2000 1:40 PM
> > Subject: Re: Cable Modem Blues...
> >
> >
> > > Check /var/log/boot.log for eth0 and see if it comes up okay during
the
> > > bootup, unless you watch closely and see it coming up. It should if
the
> > > card is working.  Also check /var/log/messages and see if there's a
line
> > > that says something like:
> > >
> > > Apr 27 10:23:24 Hstname kernel: eth0: NE2000 found at 0x300, using IRQ
9.
> > >
> > > That's what comes up on my box.
> > >
> > > If there are errors there, you can probably deduce why it's failing by
> > > seeing what the message says.
> > >
> > > Karl L. Pearson
> > > Senior uniVerse Database Analyst
> > > Senior Unix/NT/Win Analyst
> > > karlp colubs com
> > >
> >
> >
> >
> > --
> > To unsubscribe: mail redhat-install-list-request redhat com with
> > "unsubscribe" as the Subject.
>
>
> --
> To unsubscribe: mail redhat-install-list-request redhat com with
> "unsubscribe" as the Subject.
>





[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]