[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Cable Modem Blues...



Scott,

Here is that info you requested.

/proc/interrupts :

           CPU0
  0:      12679          XT-PIC  timer
  1:        274          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  6:          9          XT-PIC  floppy
  8:          1          XT-PIC  rtc
 12:          9          XT-PIC  PS/2 Mouse
 13:          1          XT-PIC  fpu
 14:      44356          XT-PIC  ide0
 15:          4          XT-PIC  ide1
NMI:          0


/proc/pci :

PCI devices found:
  Bus  0, device   0, function  0:
    Host bridge: Intel 440BX - 82443BX Host (rev 3).
      Medium devsel.  Master Capable.  Latency=32.
      Prefetchable 32 bit memory at 0xf8000000 [0xf8000008].
  Bus  0, device   1, function  0:
    PCI bridge: Intel 440BX - 82443BX AGP (rev 3).
      Medium devsel.  Master Capable.  Latency=128.  Min Gnt=140.
  Bus  0, device   7, function  0:
    ISA bridge: Intel 82371AB PIIX4 ISA (rev 2).
      Medium devsel.  Fast back-to-back capable.  Master Capable.  No
bursts.
  Bus  0, device   7, function  1:
    IDE interface: Intel 82371AB PIIX4 IDE (rev 1).
      Medium devsel.  Fast back-to-back capable.  Master Capable.
Latency=32.
      I/O at 0x1050 [0x1051].
  Bus  0, device   7, function  2:
    USB Controller: Intel 82371AB PIIX4 USB (rev 1).
      Medium devsel.  Fast back-to-back capable.  Master Capable.
Latency=32.
      I/O at 0x1060 [0x1061].
  Bus  0, device   7, function  3:
    Bridge: Intel 82371AB PIIX4 ACPI (rev 2).
      Medium devsel.  Fast back-to-back capable.
  Bus  0, device  10, function  0:
    Ethernet controller: LiteOn LNE100TX (rev 32).
      Medium devsel.  Fast back-to-back capable.  Master Capable.
Latency=32.
      I/O at 0x1400 [0x1401].
      Non-prefetchable 32 bit memory at 0xf4000000 [0xf4000000].
  Bus  0, device  12, function  0:
    Multimedia audio controller: Unknown vendor Unknown device (rev 0).
      Vendor id=127a. Device id=4320.
      Medium devsel.  Fast back-to-back capable.  Master Capable.
Latency=32.
      I/O at 0x1080 [0x1081].
  Bus  0, device  12, function  1:
    Communication controller: Unknown vendor Unknown device (rev 0).
      Vendor id=127a. Device id=4321.
      Medium devsel.  Fast back-to-back capable.  Master Capable.
Latency=32.
      Non-prefetchable 32 bit memory at 0xf4010000 [0xf4010000].
  Bus  0, device  12, function  2:
    Input device controller: Unknown vendor Unknown device (rev 0).
      Vendor id=127a. Device id=4322.
      Medium devsel.  Fast back-to-back capable.  Master Capable.  No
bursts.
      Non-prefetchable 32 bit memory at 0xf4001000 [0xf4001000].
  Bus  1, device   0, function  0:
    VGA compatible controller: ATI Mach64 GB (rev 92).
      Medium devsel.  Fast back-to-back capable.  IRQ 11.  Master Capable.
Latency=66.  Min Gnt=8.
      Non-prefetchable 32 bit memory at 0xf5000000 [0xf5000000].
      I/O at 0x2000 [0x2001].
      Non-prefetchable 32 bit memory at 0xf4100000 [0xf4100000].



Bennie

"Scott A. Zanke" <szanke america net> wrote in message
news:00050222313200 00667 mango   
> Hola,
> The following three lines from your /var/log/messages are similar to mine
except
> for the IRQ 0. That isn't right:(
> IRQ 0 is system timer. My Linksys card on this box is IRQ5
> Try cat /proc/interrupts to see what your iRQs are.
> You might need to set the pci irq's in your bios.
> Also try cat /proc/pci  to see more detailed info....
>
> Let me know what the output of the above is and I may be able to help.
> Once you can ping , telnet, ftp and such between boxen, you can share your
> cable  modem connection several ways.
> You can set up a linux box as a gateway router with ipchains (ipmasq) or
use a
> hardawre router or use a Win98 software solution such as WinProxy.
>
>
> Laterz,
> <<zank>>
>
>
>  On Wed, 03 May 2000, Bennie L. Caldwell wrote:
> > I tried to ping my other computer and got "network is unreachable".
> >
> > This is the output from my  /var/log/messages after I log on as root.
> >
>
> > May  3 00:24:13 cj49180-a kernel: tulip.c:v0.89H 5/23/98
> > becker cesdis gsfc nasa gov
> > May  3 00:24:13 cj49180-a kernel: eth0: Lite-On 82c168 PNIC at 0x1400,
00 a0
> > cc 28 52 cd, IRQ 0.
> > May  3 00:24:13 cj49180-a kernel: eth0:  MII transceiver found at MDIO
> > address 1, config 3100 status 7829.
>
> > Bennie
> > "Scott A. Zanke" <szanke america net> wrote in message
> > news:00043020280000 27694 mango   
> > > Hello,
> > > The etho: Lite-On 82C168 is correct. It's the same message I get with
my
> > > Linksys LNE100TX cards. The IRQ 0 isn't right though.
> > > The MII transceiver message is the same as mine also.
> > > I have 3 boxes networked with Linksys 10/100 cards, 1 win box, 1 RH6.1
box
> > and
> > > one dual boot box. with a 10/100 autosensing hub. Works fine with
Samba
> > and
> > > Win98 networking.
> > > I had cable modem for a few months and was sharing it. Wasn't really
> > impressed
> > > with it. I'm waiting on asdl.
> > > Can you ping and telnet to the other boxes?
> > > Any other pertinent info in /var/log/messages?
> > >
> > > Laterz,
> > > <<zank>>
> > >
> > >
> > >   On Thu, 27 Apr 2000,
> > > Bennie L. Caldwell wrote: > I didn't see eth0 comming up in
> > /var/log/boot.log
> > > for my hostname. > I checked /var/log/messages and found:
> > > >
> > > >  Apr 27 10:23:24 Hstname kernel: eth0: Lite-On 82c168 PNIC at
0x1400, 00
> > a0
> > > > cc 28 52 cd, IRQ 0.
> > > >  Apr 27 10:23:24 Hstname kernel: eth0: MII transceiver found at MDI0
> > address
> > > > 1, config 3100 status 7829.
> > > >
> > > > This doesn't look like my ethernet card. Is there anyway I can
determine
> > > > what the card address is?
> > > >
> > > >
> > > >
> > > > Bennie
> > > >
> > > >
> > > >
> > > >
> > > > ----- Original Message -----
> > > > From: "Karl Pearson" <karlp colubs com>
> > > > To: "Bennie L. Caldwell" <bennie-caldwell home com>
> > > > Sent: Thursday, April 27, 2000 1:40 PM
> > > > Subject: Re: Cable Modem Blues...
> > > >
> > > >
> > > > > Check /var/log/boot.log for eth0 and see if it comes up okay
during
> > the
> > > > > bootup, unless you watch closely and see it coming up. It should
if
> > the
> > > > > card is working.  Also check /var/log/messages and see if there's
a
> > line
> > > > > that says something like:
> > > > >
> > > > > Apr 27 10:23:24 Hstname kernel: eth0: NE2000 found at 0x300, using
IRQ
> > 9.
> > > > >
> > > > > That's what comes up on my box.
> > > > >
> > > > > If there are errors there, you can probably deduce why it's
failing by
> > > > > seeing what the message says.
> > > > >
> > > > > Karl L. Pearson
> > > > > Senior uniVerse Database Analyst
> > > > > Senior Unix/NT/Win Analyst
> > > > > karlp colubs com
>
>
> --
> To unsubscribe: mail redhat-install-list-request redhat com with
> "unsubscribe" as the Subject.
>





[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]