[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Cable Modem Blues...



Hello Bennie,
Everything looks ok except /proc/interrupts. No irq for the eth card:(
Two things to check.
Bios assign irq to pci.
And...
I'm using RH6.1 so this may not apply. What distro are you using?
With RH6.1 open the control panel then open the netwok configuration tool.
Edit the eth0 interface to assign the ip addy, netmask, activate interface at
boot time and allow any user to (de)activate interface.
Use the last option with discretion. 

Laterz,
<<zank>>

On Thu, 04 May 2000, Bennie L. Caldwell wrote:
> Scott,
> 
> Here is that info you requested.
> 
> /proc/interrupts :
> 
>            CPU0
>   0:      12679          XT-PIC  timer
>   1:        274          XT-PIC  keyboard
>   2:          0          XT-PIC  cascade
>   6:          9          XT-PIC  floppy
>   8:          1          XT-PIC  rtc
>  12:          9          XT-PIC  PS/2 Mouse
>  13:          1          XT-PIC  fpu
>  14:      44356          XT-PIC  ide0
>  15:          4          XT-PIC  ide1
> NMI:          0
> 
> 
> /proc/pci :
> 
> PCI devices found:
>   Bus  0, device   0, function  0:
>     Host bridge: Intel 440BX - 82443BX Host (rev 3).
>       Medium devsel.  Master Capable.  Latency=32.
>       Prefetchable 32 bit memory at 0xf8000000 [0xf8000008].
>   Bus  0, device   1, function  0:
>     PCI bridge: Intel 440BX - 82443BX AGP (rev 3).
>       Medium devsel.  Master Capable.  Latency=128.  Min Gnt=140.
>   Bus  0, device   7, function  0:
>     ISA bridge: Intel 82371AB PIIX4 ISA (rev 2).
>       Medium devsel.  Fast back-to-back capable.  Master Capable.  No
> bursts.
>   Bus  0, device   7, function  1:
>     IDE interface: Intel 82371AB PIIX4 IDE (rev 1).
>       Medium devsel.  Fast back-to-back capable.  Master Capable.
> Latency=32.
>       I/O at 0x1050 [0x1051].
>   Bus  0, device   7, function  2:
>     USB Controller: Intel 82371AB PIIX4 USB (rev 1).
>       Medium devsel.  Fast back-to-back capable.  Master Capable.
> Latency=32.
>       I/O at 0x1060 [0x1061].
>   Bus  0, device   7, function  3:
>     Bridge: Intel 82371AB PIIX4 ACPI (rev 2).
>       Medium devsel.  Fast back-to-back capable.
>   Bus  0, device  10, function  0:
>     Ethernet controller: LiteOn LNE100TX (rev 32).
>       Medium devsel.  Fast back-to-back capable.  Master Capable.
> Latency=32.
>       I/O at 0x1400 [0x1401].
>       Non-prefetchable 32 bit memory at 0xf4000000 [0xf4000000].
>   Bus  0, device  12, function  0:
>     Multimedia audio controller: Unknown vendor Unknown device (rev 0).
>       Vendor id=127a. Device id=4320.
>       Medium devsel.  Fast back-to-back capable.  Master Capable.
> Latency=32.
>       I/O at 0x1080 [0x1081].
>   Bus  0, device  12, function  1:
>     Communication controller: Unknown vendor Unknown device (rev 0).
>       Vendor id=127a. Device id=4321.
>       Medium devsel.  Fast back-to-back capable.  Master Capable.
> Latency=32.
>       Non-prefetchable 32 bit memory at 0xf4010000 [0xf4010000].
>   Bus  0, device  12, function  2:
>     Input device controller: Unknown vendor Unknown device (rev 0).
>       Vendor id=127a. Device id=4322.
>       Medium devsel.  Fast back-to-back capable.  Master Capable.  No
> bursts.
>       Non-prefetchable 32 bit memory at 0xf4001000 [0xf4001000].
>   Bus  1, device   0, function  0:
>     VGA compatible controller: ATI Mach64 GB (rev 92).
>       Medium devsel.  Fast back-to-back capable.  IRQ 11.  Master Capable.
> Latency=66.  Min Gnt=8.
>       Non-prefetchable 32 bit memory at 0xf5000000 [0xf5000000].
>       I/O at 0x2000 [0x2001].
>       Non-prefetchable 32 bit memory at 0xf4100000 [0xf4100000].
> 
> 
> 
> Bennie
> 
> "Scott A. Zanke" <szanke america net> wrote in message
> news:00050222313200 00667 mango   
> > Hola,
> > The following three lines from your /var/log/messages are similar to mine
> except
> > for the IRQ 0. That isn't right:(
> > IRQ 0 is system timer. My Linksys card on this box is IRQ5
> > Try cat /proc/interrupts to see what your iRQs are.
> > You might need to set the pci irq's in your bios.
> > Also try cat /proc/pci  to see more detailed info....
> >
> > Let me know what the output of the above is and I may be able to help.
> > Once you can ping , telnet, ftp and such between boxen, you can share your
> > cable  modem connection several ways.
> > You can set up a linux box as a gateway router with ipchains (ipmasq) or
> use a
> > hardawre router or use a Win98 software solution such as WinProxy.
> >
> >
> > Laterz,
> > <<zank>>
> >
> >
> >  On Wed, 03 May 2000, Bennie L. Caldwell wrote:
> > > I tried to ping my other computer and got "network is unreachable".
> > >
> > > This is the output from my  /var/log/messages after I log on as root.
> > >
> >
> > > May  3 00:24:13 cj49180-a kernel: tulip.c:v0.89H 5/23/98
> > > becker cesdis gsfc nasa gov
> > > May  3 00:24:13 cj49180-a kernel: eth0: Lite-On 82c168 PNIC at 0x1400,
> 00 a0
> > > cc 28 52 cd, IRQ 0.
> > > May  3 00:24:13 cj49180-a kernel: eth0:  MII transceiver found at MDIO
> > > address 1, config 3100 status 7829.
> >
> > > Bennie
> > > "Scott A. Zanke" <szanke america net> wrote in message
> > > news:00043020280000 27694 mango   
> > > > Hello,
> > > > The etho: Lite-On 82C168 is correct. It's the same message I get with
> my
> > > > Linksys LNE100TX cards. The IRQ 0 isn't right though.
> > > > The MII transceiver message is the same as mine also.
> > > > I have 3 boxes networked with Linksys 10/100 cards, 1 win box, 1 RH6.1
> box
> > > and
> > > > one dual boot box. with a 10/100 autosensing hub. Works fine with
> Samba
> > > and
> > > > Win98 networking.
> > > > I had cable modem for a few months and was sharing it. Wasn't really
> > > impressed
> > > > with it. I'm waiting on asdl.
> > > > Can you ping and telnet to the other boxes?
> > > > Any other pertinent info in /var/log/messages?
> > > >
> > > > Laterz,
> > > > <<zank>>
> > > >
> > > >
> > > >   On Thu, 27 Apr 2000,
> > > > Bennie L. Caldwell wrote: > I didn't see eth0 comming up in
> > > /var/log/boot.log
> > > > for my hostname. > I checked /var/log/messages and found:
> > > > >
> > > > >  Apr 27 10:23:24 Hstname kernel: eth0: Lite-On 82c168 PNIC at
> 0x1400, 00
> > > a0
> > > > > cc 28 52 cd, IRQ 0.
> > > > >  Apr 27 10:23:24 Hstname kernel: eth0: MII transceiver found at MDI0
> > > address
> > > > > 1, config 3100 status 7829.
> > > > >
> > > > > This doesn't look like my ethernet card. Is there anyway I can
> determine
> > > > > what the card address is?
> > > > >
> > > > >
> > > > >
> > > > > Bennie
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Karl Pearson" <karlp colubs com>
> > > > > To: "Bennie L. Caldwell" <bennie-caldwell home com>
> > > > > Sent: Thursday, April 27, 2000 1:40 PM
> > > > > Subject: Re: Cable Modem Blues...
> > > > >
> > > > >
> > > > > > Check /var/log/boot.log for eth0 and see if it comes up okay
> during
> > > the
> > > > > > bootup, unless you watch closely and see it coming up. It should
> if
> > > the
> > > > > > card is working.  Also check /var/log/messages and see if there's
> a
> > > line
> > > > > > that says something like:
> > > > > >
> > > > > > Apr 27 10:23:24 Hstname kernel: eth0: NE2000 found at 0x300, using
> IRQ
> > > 9.
> > > > > >
> > > > > > That's what comes up on my box.
> > > > > >
> > > > > > If there are errors there, you can probably deduce why it's
> failing by
> > > > > > seeing what the message says.
> > > > > >
> > > > > > Karl L. Pearson
> > > > > > Senior uniVerse Database Analyst
> > > > > > Senior Unix/NT/Win Analyst
> > > > > > karlp colubs com
> >
> >
> > --
> > To unsubscribe: mail redhat-install-list-request redhat com with
> > "unsubscribe" as the Subject.
> >
> 
> 
> 
> 
> -- 
> To unsubscribe: mail redhat-install-list-request redhat com with
> "unsubscribe" as the Subject.



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]