[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: 'masalah' SCSI (Re-explanations)



Is this the way you handle a problem (This list staff)? can't you at least
reply one for any comment or something like that?

Why??? Should i tell this to everyone?

Have a nice day!!!

Abdul Malik bin Hilman bin Mahyuddin
------------------------------------
Your Windows can not be cleaned?
Use Linux.

On Thu, 21 Sep 2000, Adinda Praditya wrote:

> Hallo,... anybody home?!
> 
> Where's every body? Did i do wrong? 
> 
> Abdul Malik bin Hilman bin Mahyuddin
> ------------------------------------
> Your Windows can not be cleaned?
> Use Linux.
> 
> On Tue, 19 Sep 2000, Adinda Praditya wrote:
> 
> > Hai List,...
> > 
> > As Leo asked, i start my problem.
> > 
> > When i installed RH 6.2 at 'LILO' section, i set it MBR. After that,
> > everything were OK (according to my experience with installing RH 6.2
> > before). My problem is :
> > 
> > 1. My LILO didn't work, it prompted "LI-"
> > 
> > 2. I tried to set sound configuration, so i ran 'setup'. before i finished
> > it, it showed the message like this :
> > 
> > ---
> > ATAPI device hdd:
> >   Error: Unit attention -- (Sense key=0x06)
> >   Power on, reset or bus device reset occurred -- (asc=0x29, ascq=0x00)
> >   hdd: irq timeout: status=0xd0 { Busy }
> >   hdd: ATAPI reset complete
> >   end_request: I/O error, dev 16:40 (hdd), sector 1354368
> >   ATAPI device hdd:
> >   Error: Unit attention -- (Sense key=0x06)
> >   Power on, reset or bus device reset occurred -- (asc=0x29,
> > ascq=0x00)timeout: status=0xd0 { Busy } }
> >   hdd: ATAPI reset complete
> >   end_request: I/O error, dev 16:40 (hdd), sector 1354376
> >   ATAPI device hdd:ention -- (Sense key=0x06)
> >   Error: Unit attention -- (Sense key=0x06)red -- (asc=0x29, ascq=0x00)
> >   Power on, reset or bus device reset occurred -- (asc=0x29, ascq=0x00)
> > ...
> > 
> > (there is also message about SCSI, but i couldn't cathed them, cause my
> > linux hung)
> > 
> > ---
> > 
> > It looks like the CD-ROM problem if you see the message, but i don't have
> > any problem with my CD-ROM drive and other programs.  It's just got hang
> > when i ran 'setup', 'linuxconf' or something like them. for more
> > information here is my fstab :
> > 
> > ---
> > /dev/sda5               /                       ext2    defaults        1
> > 1
> > /dev/sda6               /backup                 ext2    defaults        1
> > 2
> > /dev/sda1               /boot                   ext2    defaults        1
> > 2
> > /dev/cdrom              /mnt/cdrom              iso9660 noauto,owner,ro 0
> > 0
> > /dev/hda1               /mnt/praditya1          vfat    defaults        0
> > 0
> > /dev/fd0                /mnt/floppy             auto    noauto,owner    0
> > 0
> > none                    /proc                   proc    defaults        0
> > 0
> > none                    /dev/pts                devpts  gid=5,mode=620  0
> > 0
> > /dev/sda7               swap                    swap    defaults        0
> > 0
> > /dev/hdc1	/mnt/data	vfat	 user,exec,dev,suid,rw 1 1
> > ---
> > 
> > Leo told me to run 'e2fsck /dev/sda5' after boot from CD, and i got this :
> > 
> > here is what i've done:
> > 1. Boot from CD, then type 'linux rescue expert'
> >         I configured my SCSI card, and it was detected (no problemo)
> > 2. run 'e2fsck /dev/sda5' the output was
> >         e2fsck 1.18, 11-Nov-1999 for EXT2 FS 95/08/09
> >         e2fsck: No such file or directory while trying to open /dev/sda5
> > 
> >         The superblock could not be read or does not describe a correct
> >         ext2 filesystem. If the device is valid and it really contains an
> >         ext2 filesystem (and not swap or ufs or something else), then the
> >         superblock is corrupt, and you might try running e2fsck with an
> >         alternate superblock:
> >                 e2fsck -b 8193 <device>
> > ---
> > 
> > I think this is my re-explanation for my problems. Tell me if there is
> > something missing or wrong, Leo.
> > 
> > I hope someone can help me. 
> > 
> > Thank you in advance,
> > 
> > Abdul Malik bin Hilman bin Mahyuddin
> > ------------------------------------
> > Your Windows can not be cleaned?
> > Use Linux.
> > 
> > 
> > 
> > _______________________________________________
> > Redhat-install-list mailing list
> > Redhat-install-list redhat com
> > https://listman.redhat.com/mailman/listinfo/redhat-install-list
> > 
> 
> 
> 
> _______________________________________________
> Redhat-install-list mailing list
> Redhat-install-list redhat com
> https://listman.redhat.com/mailman/listinfo/redhat-install-list
> 





[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]