Re: NIC Recognition

[Stephen Tenhet <stenhet saftek com>]

Thanks for the assistance. 

This is part of my problem. With the 7.0 installation I can't get
anything to compile - I get all kinds of error messages. ie... structure
has no member named tbusy, etc.

I understand they screwed up with the gcc and I'm having to use kgcc. I
can't put a good gcc on the system, since I can't network... catch 22.

Drew Hunt wrote:
> 
> Revision 4 card?
> 
> Compile and use the tulip.o and pci_scan.o drivers included on the driver
> disk.  Have RH load the pci-scan first, then tulip.  Be warned, this will
> seriously confuse your other tulip cards if you have any.
> 
> Drew
> 
> > -----Original Message-----
> > From: redhat-install-list-admin redhat com
> > [mailto:redhat-install-list-admin redhat com]On Behalf Of Stephen Tenhet
> > Sent: Monday, April 16, 2001 8:52 PM
> > To: redhat-install-list redhat com
> > Subject: NIC Recognition
> >
> >
> > Running Redhat 7.0
> >
> >
> > I had a problem with a D-Link DFE-550Tx nic card, so I removed it.
> >
> > I installed a Linksys LNE100TX card. This card is supposedly supported
> > by the tulip.o file. I configured everything, but continue to get
> > startup messages indicating the card is not being activated.
> > Specifically insmod failure and the hing that the IO or IRQ may not be
> > set properly. This is a pci card.
> >
> > I really need some help getting the network card setup. Any ideas would
> > be appreciated.
> >
> > Thanks.
> >
> >
> >
> > _______________________________________________
> > Redhat-install-list mailing list
> > Redhat-install-list redhat com
> > https://listman.redhat.com/mailman/listinfo/redhat-install-list
> 
> _______________________________________________
> Redhat-install-list mailing list
> Redhat-install-list redhat com
> https://listman.redhat.com/mailman/listinfo/redhat-install-list