[Date Prev][Date Next] [Thread Prev][Thread Next]
[Thread Index]
[Date Index]
[Author Index]
Re: Red Hat 7.2 install problem
- From: Diego Zuluaga <dfz101 yahoo com>
- To: redhat-install-list redhat com
- Subject: Re: Red Hat 7.2 install problem
- Date: Fri, 23 Nov 2001 10:20:13 -0600 (CST)
unsubscribe
--- redhat install list mdsh com escribió: > I have a
Pentium 90 machine from circa 1995 which is
> perfect for my ADSL
> IP tables firewall. It has had RedHat 7.1 on for a
> while but I want to
> upgrade it to RedHat 7.2 as an easy way of getting
> EXT3 (its in a domestic
> situation and there are occasional power outages
> which can be a bitch to
> recover from).
>
> I usually install from NFS, so I boot with the
> bootnet.img floppy and
> select the appropriate settings for my NFS setup.
> There is some network
> activity and I get the message "Running anaconda -
> please wait..." but
> that is as far as the install gets. The computer is
> completely locked up
> and a power cycle or reset is the only way to
> 'recover'.
>
> I have also tried installing from CD-ROM and that
> gives exactly the same
> results.
>
> I know the NFS store and ISO images are OK because
> I've upgraded other
> machines from them. Its just this one old Pentium 90
> which won't play
> ball.
>
> The box has all SCSI disks which are correctly
> terminated. The box has, in
> the past, been up for a year and a half running
> Oracle 805 and is
> currently up running RH7.1, so I know it is working
> OK, I just can't get
> RH7.2 installer to run properly.
>
> I looked at the output displayed on the other
> virtual terminals F3 and F4
> during the "Running anaconda - please wait..." stage
> of a text mode
> install.
>
> The important thing seems to be on F3 where the last
> message is "Looking
> for USB mouse" which is followed by the machine
> locking up. The thing is,
> there is no USB at all on this ancient machine.
>
> I guess now I need to know how to stop it looking
> for USB mouses. I would
> be grateful if anyone can offer a clue as to how I
> can cure this problem.
>
> Any suggestions?
>
>
> A few notes on the box:
>
> # lspci -vt
> -[00]-+-00.0 Intel Corporation 430FX - 82437FX TSC
> [Triton I]
> +-07.0 Intel Corporation 82371FB PIIX ISA
> [Triton I]
> +-07.1 Intel Corporation 82371FB PIIX IDE
> [Triton I]
> +-0a.0-[01]--+-04.0 Intel Corporation 82557
> [Ethernet Pro 100]
> | \-05.0 Intel Corporation 82557
> [Ethernet Pro 100]
> +-0b.0 Matrox Graphics, Inc. MGA 2064W
> [Millennium]
> \-0c.0 Adaptec AHA-294x / AIC-7871
>
> # cat /proc/cpuinfo
> processor : 0
> vendor_id : GenuineIntel
> cpu family : 5
> model : 2
> model name : Pentium 75 - 200
> stepping : 5
> cpu MHz : 89.815
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : yes
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 1
> wp : yes
> flags : fpu vme de pse tsc msr mce cx8
> bogomips : 178.99
>
> # cat /proc/meminfo
> total: used: free: shared: buffers:
> cached:
> Mem: 80277504 78213120 2064384 0 29892608
> 18710528
> Swap: 134193152 81920 134111232
> MemTotal: 78396 kB
> MemFree: 2016 kB
> MemShared: 0 kB
> Buffers: 29192 kB
> Cached: 18272 kB
> Active: 46308 kB
> Inact_dirty: 108 kB
> Inact_clean: 1048 kB
> Inact_target: 112 kB
> HighTotal: 0 kB
> HighFree: 0 kB
> LowTotal: 78396 kB
> LowFree: 2016 kB
> SwapTotal: 131048 kB
> SwapFree: 130968 kB
>
> # mount
> /dev/sda1 on / type ext2 (rw)
> none on /proc type proc (rw)
> /dev/sdb1 on /mnt/cww type ext2 (rw)
> none on /dev/pts type devpts (rw,gid=5,mode=620)
> automount(pid647) on /misc type autofs
> (rw,fd=5,pgrp=647,minproto=2,maxproto=3)
>
> # df
> Filesystem 1k-blocks Used Available
> Use% Mounted on
> /dev/sda1 888952 546224 297572
> 65% /
> /dev/sdb1 48078504 44430776 1205448
> 98% /mnt/cww
>
>
>
> _______________________________________________
> Redhat-install-list mailing list
> Redhat-install-list redhat com
>
https://listman.redhat.com/mailman/listinfo/redhat-install-list
_________________________________________________________
Do You Yahoo!?
¿Quieres armar tu própia página Web pero no sabes HTML?
Usa los asistentes de edición de Yahoo! Geocities
y tendrás un sitio en sólo unos minutos.
Visítanos en http://espanol.geocities.yahoo.com
[Date Prev][Date Next] [Thread Prev][Thread Next]
[Thread Index]
[Date Index]
[Author Index]