Re: SONY CDU-76S & aic7xxx

["Huter.Liu" <huter xtu edu cn>]

hi,Libor Stehlik!
     I have never use scsi cd-rom installed linux,but I found a aic7xxx_old driver, for I used a DELL PowerEdge 2600 with the lastest 320M scsi controller, and when I add a 2940UW scsi card in it, I found the added line "alias scsi1 aic7xxx" not work, I must modprobe aic7xxx, so I add one line to /etc/init.d/rc.local, is modprobe aic7xxx_old, I forgot to try it out in /etc/module.conf, ;-)
     maybe you can try aic7xxx_old.
======= 2002-12-02 09:58:00 Origin Letter=======
>Hi All,
>
>I have troubles installing RH 8.0:
>/booting from floppy (boot.img) & continuing in text mode/
>When installer asks for source, I choose a) CD-ROM -> b) SCSI -> c)
>...aic7xxx
>The problem is that it returns (almost immediatelly) back to dialog b) (only
>SCSI is displayed as the IDE controller is disabled).
>There is an onboard AHA-7770 SCSI host adapter from HP.
>
>The strange is that if I do the same when installing RH 7.1, _it founds the
>CD_ !!!
>
>Is it related to kernel or aic7xxx driver changes from 7.1 till 8.0 ?
>Shall I try some module parameters ? (and which ones)
>
>Any suggestion kindly appreciated
>
>TIA
>Libor Stehlik
>
>
>
>_______________________________________________
>Redhat-install-list mailing list
>Redhat-install-list redhat com
>https://listman.redhat.com/mailman/listinfo/redhat-install-list
>To Unsubscribe Go To ABOVE URL or send a message to:
>redhat-install-list-request redhat com
>Subject: unsubscribe
= = = = = = = = = = = = = = = = = = = =
Best Regards
Yours
Huter.Liu
huter xtu edu cn