[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Segmentaion faults



On Thu, May 09, 2002 at 06:36:19PM +0100, Anthony Gardner wrote:
> Grendel,
> 
> I ran e2fsck and yes there were errors with the
> partition that was causing the seg faults. So, I ran
> it again and let the client fix the errors.
> 
> When I rebooted the system on lt closing I got errors
> about the filesystem not being correct and when it
> restarted, I got the same erros as the close but the
> system fixed them automatically.
> 
> Once in the system, I ran e2fsck again and I got more
> errors, many more errors and different errors!!
> 
> Running it again after rebooting I got the output
> below
> 
> Hmmmmm, what's going on here?

Yes, possibly the controller or disk drive, but check that the cable
is plugged in securely on the controller (MB?) and the drive(s).  I
had a similar problem after I'd been inside the machine on an
unrelated matter.  I'd slightly pulled the cable off one of the
drives.

Cheers,
-- 
Bob McClure, Jr.            | We have enough youth.
Bobcat Open Systems, Inc.   | How about a fountain of SMART?
robertmcclure earthlink net |





[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]