Mystery Solved: Redhat 7.3 install stops

[patrick_androsik bankone com]

First off thanks to everyone who provided me suggestions.

On the CD size discussion.  The CD's I used were of the 650MB size and
700MB size.  Once I used the below fix both sets worked fine.

The answer that has fixed my problem was to not use the EXT3 filesystem.
For some reason still really unknown, the install did not like it when I
choose to use the EXT3 filesystem.  I went ahead and installed Redhat
several times on each system using the EXT2 filesystem and no problems what
so ever.  I then decided to temp fate and I turned around and repeated the
process again and choose to use the EXT3 filesystem and guess what.  The
install failed to complete everytime.  So I turned around again (getting
dizzy at this point) and repeated the process and used EXT2 and low and
behold the install completed. So something must be wacked out in the
install for 7.3.

Just to let you know, in Redhat 7.2 I use the EXT3 filesystem and it works
fine.  No problems during the install.

Thanks,

Patrick




This transmission may contain information that is privileged, confidential and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the information contained herein (including any reliance thereon) is STRICTLY PROHIBITED. If you received this transmission in error, please immediately contact the sender and destroy the material in its entirety, whether in electronic or hard copy format. Thank you.