[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Dell Dimension XPS D233 - Shrike 9.0 - Find Sound Card



>Do one of the two following commands
>
>  cat /proc/pci | less
>  lspci -v -v | less
>
>and look for a stanza that looks like it belongs to the sound card.
>Post that and we'll see if we can help you.
>
>Cheers,
>-- 
>Bob McClure, Jr.


I didn't see anything resembling a Sound Card so here is the complete
result of: lspci -v -v | less 

Gene

=======================================

00:00.0 Host bridge: Intel Corp. 440LX/EX - 82443LX/EX Host bridge (rev
03)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
        Latency: 32
        Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [a0] AGP version 1.0
                Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
                Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
                                                                                                                                             
00:01.0 PCI bridge: Intel Corp. 440LX/EX - 82443LX/EX AGP bridge (rev
03) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 96
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
        Memory behind bridge: fd000000-fdffffff
        Prefetchable memory behind bridge: f6000000-f6ffffff
        BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
                                                                                                                                             
00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 01)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
                                                                                                                                             
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
(prog-if 80 [Master])
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Region 4: I/O ports at fcf0 [size=16]
                                                                                                                                             
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
(prog-if 00 [UHCI])
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Interrupt: pin D routed to IRQ 11
        Region 4: I/O ports at fcc0 [size=32]00:07.3 Bridge: Intel Corp.
82371AB/EB/MB PIIX4 ACPI (rev 01)
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin ? routed to IRQ 9
 
00:0e.0 Ethernet controller: Linksys Network Everywhere Fast Ethernet
10/100 model NC100 (rev 11)
        Subsystem: Accton Technology Corporation: Unknown device 1216
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B+
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (63750ns min, 63750ns max), cache line size 08
        Interrupt: pin A routed to IRQ 9
        Region 0: I/O ports at f800 [size=256]
        Region 1: Memory at fedffc00 (32-bit, non-prefetchable)
[size=1K]
        Expansion ROM at <unassigned> [disabled] [size=128K]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 
01:00.0 VGA compatible controller: NVidia / SGS Thomson (Joint Venture)
Riva128 (rev 10) (prog-if 00 [VGA])
        Subsystem: STB Systems Inc STB Velocity 128
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (750ns min, 250ns max)
        Interrupt: pin A routed to IRQ 9
        Region 0: Memory at fd000000 (32-bit, non-prefetchable)
[size=16M]
        Region 1: Memory at f6000000 (32-bit, prefetchable) [size=16M]
        Expansion ROM at <unassigned> [disabled] [size=4M]
        Capabilities: [44] AGP version 1.0
                Status: RQ=4 SBA- 64bit- FW- Rate=x1
                Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>

=============================================




[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]