Re: Where is eth0?

[Cédric CACHAT <lsf noos fr>]

Thanks for the hint Rick. I tried it but it didn't work.
It just poped an unhandled error telling me to report it. Thing is, I 
didn't write it down so I can't do it anymore.
I had to change my card to a PCI card . Once I had removed kudzu which 
seems to inhibit all connections to the outside
# chkconfig --del kudzu
and done a correct
# ifconfig eth0 ... netmask ...
with my parameters and a
# ifup eth0
well, it all worked fine.

For a reason, this didn't work with my former ISA card. I have no idea why.

So I now updated my system to Fedora Core 2 and once more removed kudzu 
and ... no problem.


Rick Stevens a écrit:

> Cédric CACHAT wrote:
>
> > Hello,
> >
> > I'm just getting started with Linux so please excuse me if  the 
> > explanations aren't clear enough.
> > I have encountered some problems while installing Fedora Core 2 on my 
> > computer. All information concerning eth0 is lost after installation, 
> > I can't have any network connection whatsoever.
> >
> > Here is a summary of what I've done so far:
> > - I've put Fedora core 2 with minimal configuration on a computer 
> > that used to be running with windows. This first time, it worked just 
> > fine. I could update the rpms to the latest version available with 
> > up2date.
> > This is where I screwed up:
> > - I then tried to install ALL the rpms from the CD, starting from 
> > scratch, and as I rebooted the computer, the connection to internet 
> > was lost as if my 3com card wasn't there anymore
> > - I tried to put back the minimal configuration, even get back down 
> > to Fedora Core 1, but always with the same result.
> > - I tried to install from a hard drive => didn't work either
> > So I figured my card was dead. I tried to put windows on a partition 
> > and Fedora on an other. When I boot with windows, there is no problem 
> > with the network connection.
> > But as soon as I try to start using the fedora partition, well, I let 
> > you guess... nothing!
> > The % ifconfig is nearly "empty". It just gives the "lo" details. The 
> > % ifup eth0 gives "configuration for eth0 not found". How could I 
> > restore my connection?
> >
> > Has anybody encountered such problems? Can you tell me what to do?
>
>
> When you did the second install, the system probably asked you if you
> wanted to migrate your network settings.  If you answered "No", then the
> old config is erased.
>
> Log in as the root user.  At the "#" prompt under Fedora Core 1, enter:
>
>     redhat-config-network
>
> If you're using Fedora Core 2, use:
>
>     system-config-network
>
> Fill in the forms as you need them.  That should reconfigure your
> network settings.
> ----------------------------------------------------------------------
> - Rick Stevens, Senior Systems Engineer     rstevens vitalstream com -
> - VitalStream, Inc.                       http://www.vitalstream.com -
> -                                                                    -
> -           Give me ambiguity or give me something else!             -
> ----------------------------------------------------------------------
>
>
> _______________________________________________
> Redhat-install-list mailing list
> Redhat-install-list redhat com
> https://www.redhat.com/mailman/listinfo/redhat-install-list
> To Unsubscribe Go To ABOVE URL or send a message to:
> redhat-install-list-request redhat com
> Subject: unsubscribe