Re: modem dial-up script

[Fred Grant <fdgrant powercom net>]

On Thu, 2004-02-05 at 20:12, Rick Stevens wrote:
> Ian Timshel wrote:
> > 
> > On February 5, 2004 05:28 pm, you wrote:
> > 
> >>Does anyone know the location of the modem dial-up script for rh9?  
> > 
> > I'd
> > 
> >>like to modify it so the modem volume is set to mute.
> >>
> > 
> > 
> > ====================
> > 
> > I don't know if "wvdial" comes with RH9 but I'm using it on RH7.2 and 
> > it's been perfectly stable and simple and effective.
> > Cheers!  Ian.  
> 
> Yes, it comes with RH9.  Edit /etc/wvdial.conf and add the appropriate
> command to the "[Dialer Defaults]" section, for example
> 
> Was:		Init2 = AT S11=50
> Change To:	Init2 = AT S11=50 M0
> 
> (or whatever the command is.  I've forgotten the AT command set).  See
> "man wvdial.conf" for details.
> ----------------------------------------------------------------------
> - Rick Stevens, Senior Systems Engineer     rstevens vitalstream com -
> - VitalStream, Inc.                       http://www.vitalstream.com -
> -                                                                    -
> -     I.R.S.: We've got what it takes to take what you've got!       -
> ----------------------------------------------------------------------
> 
> 

> 
Thanks Rick, that worked fine.  I also found that, as root, the network
connection device can be edited and the ATM0 can be added (under
options).  Unfortunately, I had been using O(oh) instead of 0 (zero).
Thanks again.  Fred