[Date Prev][Date Next] [Thread Prev][Thread Next]
[Thread Index]
[Date Index]
[Author Index]
Re: redhat AS 3.0 update 1 SATA problems
- From: Rick Stevens <rstevens vitalstream com>
- To: Getting started with Red Hat Linux <redhat-install-list redhat com>
- Subject: Re: redhat AS 3.0 update 1 SATA problems
- Date: Thu, 06 May 2004 10:11:49 -0700
Neil McFadyen wrote:
I am trying to run redhat AS 3.0 update 1 on a new intel SE7505VB2
motherboard
with 2 SATA disks, 1 - 120GB Western Digitial and the 2nd is a 200GB
SATA western digital
the / is on the first disk and works ok
however the partition table on the second disk keeps getting corrupted,
it loses its label and the partition has to be re-created and the
filesystem rebuilt
eg fdisk /dev/hdg
n
p
1
w
then mk2efs -L /export /dev/hdg1
and tune2fs -j /dev/hdg1 to make it a ext3 filesystem
Why not "mke2fs -j -L /export /dev/hdg1" instead of two commands?
copying files to and from the 2nd disk results in io errors and finally
a total lost partition table and Label
I also had a Adaptec 2410a (ATA raid) with 2 160GB disk in the same
computer, and had similar problems, I removed it hoping it would solve
the above problem but it did not.
I am left to think that redhat AS 3.0 update 1 is not compatible with
this motherboard
I'm more likely to suspect your RAM. Filesystems don't just "corrupt"
for no reason. Unless the driver is flakey (unlikely), I'd really
check your RAM.
Since you had your machine open switching cards and such, shut the thing
down and unplug ALL PCI cards, your RAM and your CPU and reinstall them.
The connectors sometimes get dirty or the card slightly misaligns with
the connector when the case flexes as you lift it. Reseating the cards
will often fix this sort of glitch.
Also download and run memtest86 (http://www.memtest86.com) and run that
to test your RAM. I can't tell you how many machines have marginal RAM
in them and start acting weird. I've had four crap out this week alone.
Filesystem corruption is one of the primary indications of flakey RAM
or PCI busses.
Has anyone been able to install it and use 2 disks, or some other raid
controller
Try the above stuff. I'll bet you'll find the problem there.
----------------------------------------------------------------------
- Rick Stevens, Senior Systems Engineer rstevens vitalstream com -
- VitalStream, Inc. http://www.vitalstream.com -
- -
- "And on the seventh day, He exited from append mode." -
----------------------------------------------------------------------
[Date Prev][Date Next] [Thread Prev][Thread Next]
[Thread Index]
[Date Index]
[Author Index]