Installing RedHat Enterprise 3 under z/VM 4.4
Rick Stevens
rstevens at vitalstream.com
Wed Mar 9 00:17:34 UTC 2005
Larry Pickering wrote:
>
> Hello list ,
>
> Has anyone else had a problem were Linux can't see the DASD defined on
> the z/VM host ? ..
>
> The messages on the VM guest seem to be ok, but when I SSH in I get a
> message saying "no disk drives found"
>
>
> I'm using NFS on a RedHat Enterprise 3 (Intel) machine for the install..
>
>
> Thanks Larry
To be honest, I've never used VM, so I can't answer this. Anyone else?
>
>
>
> redhat.parm file
>
> =====================
>
> ROOT=/dev/ram0 ro ip=off ramdisk_size=40000
> CMSDASD=191
> CMSCONFFILE=redhat.parm
> DASD=200-202
> IPADDR=10.1.15.200
> NETWORK=10.1.1.1
> NETMASK=255.255.0.0
> GATEWAY=10.1.1.1
> BROADCAST=10.1.255.255
> HOSTNAME=RH01.CYBERMATION.COM
> MTU=1492
>
>
>
> Mini-disk defined
>
> ==================
>
> LABEL VDEV M STAT CYL TYPE BLKSZ FILES BLKS USED-(%) BLKS LEFT
> BLK TOTAL
> LNX191 191 A R/W 45 3390 4096 5 2145-26 5955
> 8100
> *LNX201 201 B R/W 200 3390 4096 0 11-00 35989
> 36000*
> *LNX202 202 C R/W 1000 3390 4096 0 19-00 179981
> 180000*
> *LNX200 200 D R/W 100 3390 4096 0 7-00 17993
> 18000*
> MNT190 190 S R/O 100 3390 4096 692 14304-79 3696
> 18000
> MNT19E 19E Y/S R/O 250 3390 4096 1009 26522-59 18478
> 45000
>
>
>
>
>
> Log messages on VM guest
>
> =============================
>
> Linux version 2.4.21-4.EL (bhcompile at devel5.z900.redhat.com) (gcc
> version 3.2.3
> 20030502 (Red Hat Linux 3.2.3-20)) #1 SMP Fri Oct 3 17:30:41 EDT 2003
>
> We are running under VM (64 bit mode)
>
> On node 0 totalpages: 65536
>
> zone(0): 65536 pages.
>
> zone(1): 0 pages.
>
> zone(2): 0 pages.
>
> Kernel command line: ROOT=/dev/ram0 ro ip=off ramdisk_size=40000
> CMSDASD=191
>
> CMSCONFFILE=redhat.parm
>
> DASD=200-202
>
> IPADDR=10.1.15.200
>
> NETWORK=10.1.1.1
>
> NETMASK=255.255.0.0
>
> GATEWAY=10.1.1.1
>
> BROADCAST=10.1.255.255
>
> HOSTNAME=RH01.CYBERMATION.COM
>
> MTU=1492
>
> Highest subchannel number detected (hex) : 000E
>
> Calibrating delay loop... 304.74 BogoMIPS
>
> Memory: 241356k/262144k available (2364k kernel code, 0k reserved, 994k
> data, 32
> 4k init)
>
> Dentry cache hash table entries: 32768 (order: 7, 524288 bytes)
>
> Inode cache hash table entries: 16384 (order: 6, 262144 bytes)
>
> Mount cache hash table entries: 256 (order: 0, 4096 bytes)
>
> Buffer cache hash table entries: 16384 (order: 5, 131072 bytes)
>
> Page-cache hash table entries: 65536 (order: 7, 524288 bytes)
>
> debug: Initialization complete
>
> POSIX conformance testing by UNIFIX
>
> Detected 2 CPU's
>
> Boot cpu address 0
>
> cpu 0 phys_idx=0 vers=FF ident=0539FA machine=2066 unused=0000
>
> cpu 1 phys_idx=1 vers=FF ident=0539FA machine=2066 unused=0000
>
> Starting migration thread for cpu 0
>
> Starting migration thread for cpu 1
>
> init_mach : starting machine check handler
>
> Linux NET4.0 for Linux 2.4
>
> Based upon Swansea University Computer Society NET3.039
> Initializing RT netlink socket
>
> mach_handler : ready
>
> mach_handler : waiting for wakeup
> Starting kswapd
> VFS: Disk quotas vdquot_6.5.1
> aio_setup: num_physpages = 16384
>
> aio_setup: sizeof(struct page) = 104
>
> pty: 2048 Unix98 ptys configured
>
> NET4: Frame Diverter 0.46
> RAMDISK driver initialized: 256 RAM disks of 40000K size 1024 blocksize
> md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>
> md: Autodetecting RAID arrays.
>
> md: autorun ...
> md: ... autorun DONE.
> Initializing Cryptographic API
>
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP: routing cache hash table of 512 buckets, 12Kbytes
> TCP: Hash tables configured (established 4096 bind 8192)
>
> Linux IP multicast router 0.06 plus PIM-SM
>
> Initializing IPsec netlink socket
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> RAMDISK: Compressed image found at block 0
>
> Freeing initrd memory: 5486k freed
>
> VFS: Mounted root (ext2 filesystem) readonly.
> Freeing unused kernel memory: 40k freed
> Starting the zSeries initrd to configure networking. Version is 1.01
>
> Enter which kind of network device do you intend to use
> (e.g. ctc, escon, iucv, eth, hsi, tr):
> eth
> Enter parameters you need to pass to the channel device layer.
> This includes the I/O ports of your ctc, escon, qeth, hsi and lcs
> devices.
> (e.g. "ctc0,0x600,0x601" will activate the ctc0 interface at I/O
>
> ports 0x600,0x601)
>
> Hipersocket interfaces need to be configured like qeth devices,
>
> p.e. qeth0,0x3000,0x3001,0x3002
>
> Additional parameters for QETH devices such as the portname
>
> should be entered at the next prompt, not here !
>
> qeth0,0x600,0x0601,0x0602
>
> Each OSA-Express feature in QDIO mode must be associated with a port
> name
> Enter additional parameters for your QETH device
>
> (e.g. "add_parms,0x10,{lo_devno,hi_devno},portname:port_name")
>
> Press enter if you don't want to enter additional parameters
>
> add_parms,0x10,0x600,0x602,portname:osdport1
>
> qdio: loading QDIO base support version 2 ($Revision: 1.145 $/$Revision:
> 1.57 $)
>
>
> qeth: loading qeth S/390 OSA-Express driver ($Revision: 1.337
> $/$Revision: 1.113
> $/$Revision: 1.42 $:VLAN)
>
> qeth: allocated 0 spare buffers
>
> qeth: Trying to use card with devnos 0x600/0x601/0x602
>
> qeth: Device 0x600/0x601/0x602 is an OSD Express card (level: V440)
>
> with link type Gigabit Eth (no portname needed by interface)
>
> divert: allocating divert_blk for eth0
>
> Enter your DNS server(s), separated by colons (:):
>
> 131.50.30.14
>
> Enter your DNS search domain(s) (if any), separated by colons (:):
>
>
>
> eth0 Link encap:Ethernet HWaddr 02:00:01:00:00:00
>
> inet addr:10.1.15.200 Bcast:10.1.255.255 Mask:255.255.0.0
>
> UP BROADCAST RUNNING NOARP MULTICAST MTU:1492 Metric:1
>
> RX packets:56 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>
> collisions:0 txqueuelen:100
>
> RX bytes:8085 (7.8 Kb) TX bytes:0 (0.0 b)
>
> Interrupt:4
>
>
>
> lo Link encap:Local Loopback
>
> inet addr:127.0.0.1 Mask:255.0.0.0
>
> UP LOOPBACK RUNNING MTU:16436 Metric:1
>
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>
> collisions:0 txqueuelen:0
>
> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
>
>
>
> Kernel IP routing table
>
> Destination Gateway Genmask Flags Metric Ref Use
> Iface
> 127.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0
> lo
> 10.1.0.0 0.0.0.0 255.255.0.0 U 0 0 0
> eth0
> 0.0.0.0 10.1.1.1 0.0.0.0 UG 0 0 0
> eth0
> Starting portmap.
>
> Journalled Block Device driver loaded
>
>
>
> Starting telnetd and sshd to allow login over the network.
>
>
>
> Connect now to 10.1.15.200 to start the installation.
>
> sshd(pam_unix)[62]: session opened for user root by (uid=0)
>
> * modules to insert vga16fb
>
> * module(s) vga16fb not found
>
> * load module set done
>
> * 249216 kB are available
>
> * modules to insert cramfs vfat sunrpc lockd nfs loop isofs floppy
> * loaded cramfs from /modules/modules.cgz
> * loaded sunrpc from /modules/modules.cgz
> * loaded lockd from /modules/modules.cgz
> * loaded nfs from /modules/modules.cgz
> * loaded loop from /modules/modules.cgz
> * module(s) vfat isofs floppy not found
> * inserted /tmp/cramfs.o
> * inserted /tmp/sunrpc.o
> * inserted /tmp/lockd.o
> * inserted /tmp/nfs.o
> loop: loaded (max 8 devices)
> * inserted /tmp/loop.o
> * load module set done
> * modules to insert ide-cd
> * module(s) ide-cd not found
> * load module set done
> * modules to insert sd_mod sr_mod
> * module(s) sd_mod sr_mod not found
> * load module set done
> * modules to insert dasd_mod
> * loaded dasd_mod from /modules/modules.cgz
> dasd: initializing...
> dasd: Registered successfully to major no 94
> dasd: initialization finished
> * inserted /tmp/dasd_mod.o
> * load module set done
> * modules to insert dasd_diag_mod dasd_fba_mod dasd_eckd_mod
> * loaded dasd_fba_mod from /modules/modules.cgz
> * loaded dasd_eckd_mod from /modules/modules.cgz
> * module(s) dasd_diag_mod not found
> dasd(fba): FBA discipline initializing
>
> dasd: <devno: 0200> Add lowmem page :000000000e667000
>
> dasd: <devno: 0200> Add lowmem page :000000000e651000
>
> dasd: <devno: 0200> Free lowmem page :000000000e651000
>
> dasd: <devno: 0200> Free lowmem page :000000000e667000
>
> dasd: <devno: 0201> Add lowmem page :000000000e667000
>
> dasd: <devno: 0201> Add lowmem page :000000000e651000
>
> dasd: <devno: 0201> Free lowmem page :000000000e651000
>
> dasd: <devno: 0201> Free lowmem page :000000000e667000
>
> dasd: <devno: 0202> Add lowmem page :000000000e667000
>
> dasd: <devno: 0202> Add lowmem page :000000000e651000
>
> dasd: <devno: 0202> Free lowmem page :000000000e651000
>
> dasd: <devno: 0202> Free lowmem page :000000000e667000
>
> dasd(fba): We are interested in: Dev 9336/00 @ CU 6310/00
>
> dasd(fba): We are interested in: Dev 3370/00 @ CU 3880/00
>
> * inserted /tmp/dasd_fba_mod.o
>
> dasd(eckd): ECKD discipline initializing
>
> dasd: <devno: 0200> Add lowmem page :000000000e595000
>
> dasd: <devno: 0200> Add lowmem page :000000000e593000
>
> dasd(eckd): /dev/dasda ( 94: 0),0200 at 01: 3390/0A(CU:3990/04) Cyl:100
> Head:15 S
> ec:224
>
> dasd(eckd): /dev/dasda ( 94: 0),0200 at 01: 3390/0A(CU:3990/04):
> Configuration da
> ta read
>
> dasd: No request IRQ
>
> dasd: <devno: 0201> Add lowmem page :000000000e58a000
>
> dasd: <devno: 0201> Add lowmem page :000000000e589000
>
> dasd(eckd): /dev/dasda ( 94: 0),0200 at 01: (4kB blks): 72000kB at
> 48kB/trk linux
> disk layout
>
> dasd(eckd): /dev/dasdb ( 94: 4),0201 at 02: 3390/0A(CU:3990/04) Cyl:200
> Head:15 S
> ec:224
> dasd(eckd): /dev/dasdb ( 94: 4),0201 at 02: 3390/0A(CU:3990/04):
> Configuration da
> ta read
>
> dasd: No request IRQ
>
> dasd: <devno: 0202> Add lowmem page :000000000e583000
>
> dasd: <devno: 0202> Add lowmem page :000000000e582000
>
> dasd(eckd): /dev/dasdb ( 94: 4),0201 at 02: (4kB blks): 144000kB at
> 48kB/trk linu
> x disk layout
>
> dasd(eckd): /dev/dasdc ( 94: 8),0202 at 03: 3390/0A(CU:3990/04) Cyl:1000
> Head:15
> Sec:224
>
> dasd(eckd): /dev/dasdc ( 94: 8),0202 at 03: 3390/0A(CU:3990/04):
> Configuration da
> ta read
>
> dasd: No request IRQ
>
> dasd: waiting for responses...
>
> dasd(eckd): /dev/dasdc ( 94: 8),0202 at 03: (4kB blks): 720000kB at
> 48kB/trk linu
> x disk layout
>
> Partition check:
>
> dasda:CMS1/ LNX200: dasda1
>
> dasdb:CMS1/ LNX201: dasdb1
>
> dasdc:CMS1/ LNX202: dasdc1
>
> dasd(eckd): We are interested in: CU 3880/00
>
> dasd(eckd): We are interested in: CU 3990/00
>
> dasd(eckd): We are interested in: CU 2105/00
>
> dasd(eckd): We are interested in: CU 9343/00
>
> * inserted /tmp/dasd_eckd_mod.o
>
> * load module set done
>
> * looking for usb controllers
>
> * no usb controller found
>
> * no firewire controller found
>
> * no pcic controller found
>
> * probing buses
> * finished bus probing
>
> * found nothing
>
> * going to set language to en_US.UTF-8
>
> * setting language to en_US.UTF-8
>
> * need to set up networking
>
> * going to pick interface
>
> * going to do getNetConfig
>
> * doing kickstart... setting it up
>
> * reverse name lookup worked
>
> * starting to STEP_URL
>
> * going to do nfsGetSetup
>
> * mounting nfs path nissan.cybermation.com:/export/home
>
> nfs warning: mount version older than kernel
>
> * mounted nissan.cybermation.com:/export/home on /mnt/source
>
> * can access stage2.img
>
> * mntloop loop0 on /mnt/runtime as /mnt/source/RedHat/base/stage2.img fd
> is 14
> Unable to identify CD-ROM format.
>
> VFS: Can't find ext2 filesystem on dev loop(7,0).
>
> * mntloop loop7 on /tmp/product-disk as
> /mnt/source/RedHat/base/product.img fd i
> s 14
>
> Unable to identify CD-ROM format.
>
> * recursively copying /tmp/product-disk/lost+found
>
> * recursively copying /tmp/product-disk/installclasses
>
> * recursively copying /tmp/product-disk/pixmaps
>
> * umounting loopback /tmp/product-disk loop7
>
> * after mountStage2, rc is 0
>
> * got url nfs://mnt/source/.
>
> * getting ready to spawn shell now
>
> %G* modules to insert ide-cd
>
> * module(s) ide-cd not found
> * load module set done
>
> * modules to insert sd_mod sr_mod
>
> * module(s) sd_mod sr_mod not found
>
> * load module set done
>
> * probing buses
>
> * finished bus probing
>
> * found nothing
>
> -/bin/sh-2.05b# * modules to insert fsm ctc
>
> * loaded fsm from /modules/modules.cgz
>
> * loaded ctc from /modules/modules.cgz
>
> * inserted /tmp/fsm.o
>
> CTC driver Version: 1.57 with CHANDEV support initialized
>
> * inserted /tmp/ctc.o
>
> * load module set done
>
> * modules to insert iucv netiucv
>
> * loaded iucv from /modules/modules.cgz
>
> * loaded netiucv from /modules/modules.cgz
>
> IUCV lowlevel driver Version: 1.39 initialized
>
> * inserted /tmp/iucv.o
>
> NETIUCV driver Version: 1.21 initialized
>
> * inserted /tmp/netiucv.o
>
> * load module set done
>
> * looking for video cards requiring agpgart module
>
> * no video cards found
>
> * modules to insert md raid0 raid1 xor raid5 msdos reiserfs jfs xfs
> lvm-mod
> * loaded raid0 from /mnt/runtime/modules/modules.cgz
>
> * loaded raid1 from /mnt/runtime/modules/modules.cgz
>
> * loaded xor from /mnt/runtime/modules/modules.cgz
>
> * loaded raid5 from /mnt/runtime/modules/modules.cgz
>
> * loaded lvm-mod from /mnt/runtime/modules/modules.cgz
> * module(s) md msdos reiserfs jfs xfs not found
> md: raid0 personality registered as nr 2
> * inserted /tmp/raid0.o
> md: raid1 personality registered as nr 3
> * inserted /tmp/raid1.o
> raid5: measuring checksumming speed
> 8regs : 471.200 MB/sec
> 8regs_prefetch: 568.800 MB/sec
> 32regs : 404.400 MB/sec
> 32regs_prefetch: 373.200 MB/sec
> raid5: using function: 8regs_prefetch (568.800 MB/sec)
> * inserted /tmp/xor.o
> md: raid5 personality registered as nr 4
> * inserted /tmp/raid5.o
> LVM version 1.0.5+(22/07/2002) module loaded
> * inserted /tmp/lvm-mod.o
> * load module set done
> * NFS install method detected, will use RHupdates/
> * Running anaconda script /usr/bin/anaconda
> sshd(pam_unix)[62]: session closed for user root
> sending termination signals...done
> sending kill signals...done
> disabling swap...
> unmounting filesystems...
> ¨/mnt/runtime done
> ¨disabling /dev/loop0
> ¨/proc done
> ¨/dev/pts done
> ¨/tmp/ramfs done
> ¨/mnt/source done
> you may safely reboot your system
>
>
>
>
>
>
>
> Messages received on Telnet session ..
>
> ====================================
>
> Warning
> No hard drives have been found.
> You probably need to manually
> choose device drivers for the
> installation to succeed. Would
> you like to select drivers now?
>
>
>
>
> Devices
> No device drivers have been loaded for your
> system. Would you like to load any now?
>
>
>
>
>
> S/390 Channel to Channel (ctc)
>
> S/390 Inter-User Communication Vehicle (iucv) (netiucv)
>
>
>
>
> An error has occurred - no valid devices
> were found on which to create new file
> systems. Please check your hardware for
> the cause of this problem.
>
>
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Redhat-install-list mailing list
> Redhat-install-list at redhat.com
> https://www.redhat.com/mailman/listinfo/redhat-install-list
> To Unsubscribe Go To ABOVE URL or send a message to:
> redhat-install-list-request at redhat.com
> Subject: unsubscribe
--
----------------------------------------------------------------------
- Rick Stevens, Senior Systems Engineer rstevens at vitalstream.com -
- VitalStream, Inc. http://www.vitalstream.com -
- -
- It is better to have loved and lost. Cheaper, too! -
----------------------------------------------------------------------
More information about the Redhat-install-list
mailing list