Re: Upgrading to RHEL 4

[jlopes151 comcast net]

> On Mon, 2005-11-21 at 19:20 +0000, jlopes151 comcast net wrote:
> > > On Sun, 2005-11-20 at 03:07 +0000, jlopes151 comcast net wrote:
> > > > Ok so I have downloaded the *.iso files now what? I don't yet know enough 
> > > about Linx to use these files. Can anyone help?
> > > 
> > > You can burn the files to CDs and install from there.  That's probably
> > > the easiest way.
> > > 
> > > Are you currently running Linux?  If so, what version?  Can you post
> > > the output of the "dmesg" command?
> > > 
> > 
> > I ran the dmesg command the output is in the attached file. I tried to burn a 
> cd using the cdrecord command.
> > Found the cdrom dev values with -scanbus option. I have two cds drives on this 
> machine one wouldn't mount the other appears to work. The command executes and 
> runs with a number of messages but when I acces the cd nothing is there. 
> > 
> > Here's the command
> > mkisofs -R -o /vzr/tmp/myhome.cd /home/myhome
> > cdrecord -scanbus (see attached fiel scanbus.txt)
> > cdrecord -v speed=2 dev=0,0,0 -data /var/tmp/myhome.cd
> 
> Yes, that's right.  The LiteON is a DVD-RW (I have one too).  The other
> device appears to be a simple DVD reader:
> 
> 	hdc: attached ide-cdrom driver.
> 	hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
> 
> Now, as far as burning the .iso images you downloaded, the command you
> want to use is:
> 
> 	cdrecord -v dev=0,0,0 /path/to/iso/file
> 
> Repeat that for each .iso you downloaded.  When you're done, you should
> be able to take the CD you burned for the first .iso file and boot right
> off it.

How can I check that the file is on the CD? I have tried to backup my home dir files but don't see anything when I mount the drive.


> On Mon, 2005-11-21 at 19:20 +0000, jlopes151 comcast net wrote:
> > > On Sun, 2005-11-20 at 03:07 +0000, jlopes151 comcast net wrote:
> > > > Ok so I have downloaded the *.iso files now what? I don't yet know enough 
> > > about Linx to use these files. Can anyone help?
> > > 
> > > You can burn the files to CDs and install from there.  That's probably
> > > the easiest way.
> > > 
> > > Are you currently running Linux?  If so, what version?  Can you post
> > > the output of the "dmesg" command?
> > > 
> > 
> > I ran the dmesg command the output is in the attached file. I tried to burn a 
> cd using the cdrecord command.
> > Found the cdrom dev values with -scanbus option. I have two cds drives on this 
> machine one wouldn't mount the other appears to work. The command executes and 
> runs with a number of messages but when I acces the cd nothing is there. 
> > 
> > Here's the command
> > mkisofs -R -o /vzr/tmp/myhome.cd /home/myhome
> > cdrecord -scanbus (see attached fiel scanbus.txt)
> > cdrecord -v speed=2 dev=0,0,0 -data /var/tmp/myhome.cd
> 
> Yes, that's right.  The LiteON is a DVD-RW (I have one too).  The other
> device appears to be a simple DVD reader:
> 
> 	hdc: attached ide-cdrom driver.
> 	hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
> 
> Now, as far as burning the .iso images you downloaded, the command you
> want to use is:
> 
> 	cdrecord -v dev=0,0,0 /path/to/iso/file
> 
> Repeat that for each .iso you downloaded.  When you're done, you should
> be able to take the CD you burned for the first .iso file and boot right
> off it.
> 
> ----------------------------------------------------------------------
> - Rick Stevens, Senior Systems Engineer     rstevens vitalstream com -
> - VitalStream, Inc.                       http://www.vitalstream.com -
> -                                                                    -
> -           What is a "free" gift?  Aren't all gifts free?           -
> ----------------------------------------------------------------------
> 
> _______________________________________________
> Redhat-install-list mailing list
> Redhat-install-list redhat com
> https://www.redhat.com/mailman/listinfo/redhat-install-list
> To Unsubscribe Go To ABOVE URL or send a message to:
> redhat-install-list-request redhat com
> Subject: unsubscribe