Tape drive on HP Smart Array 6i HBA

Allen, Jack Jack.Allen at McKesson.com
Wed Sep 14 00:11:20 UTC 2005


        I have loaded AS 4 on an HP system with a Smart Array 6i HBA.
There is a 4mm tape drive connected to one of the channels. It shows up
during boot as the HBA is identified as LUN 5. But when Linux comes up
it does not see it therefore no /dev/st0 file is created. There are 5
disk on the system configured as a single logical disk via the HBA. The
disk shows up as /dev/cciss/c0d0 and then /dev/cciss/c0d0p1 through
/dev/cciss/c0d0p11 per the way the disk was partitioned at installation
time.

        So is there another drive that needs to be loaded? 

Thanks: 
        Jack Allen 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/redhat-install-list/attachments/20050913/8c749ad0/attachment.htm>


More information about the Redhat-install-list mailing list