RE: HP Netraid... or booting to Hardware raid...

["Andrews, Bryan (CCI-Atlanta)" <Bryan Andrews cox com>]

Yes... It was set up with the default redhat 6.0 server build as was one
sitting next to it. The difference being the other one has the system drives
hanging off the on board adaptec chipset (this one boots w/o startup
diskette).

I will re-verify this afternoon though on this issue (marked bootable).
_______________________________

Bryan Andrews
Site Administrator - CCI Web
404.843.7408
404.847.6335 fax
404.597.2316 cel

Cox Communications, Inc.
1400 Lake Hearn Drive
Atlanta, GA 30319
mailto:bryan andrews cox com
_______________________________


		-----Original Message-----
		From:	Chris Fishwick [mailto:rimmer calvin nu]
		Sent:	Thursday, August 05, 1999 9:35 AM
		To:	redhat-list redhat com
		Subject:	Re: HP Netraid... or booting to Hardware
raid... 

		> Does this system have CMOS settings controlling the boot
device
		> sequence?  If so, make sure the floppy is last.
		> 
		> Does /sbin/lilo run OK after you get booted?

		Just a thought on this issue, does the drive that you want
to from have a
		partition on it that is marked bootable??

		Regards

		Chris



		-- 
		To unsubscribe: mail redhat-list-request redhat com with
"unsubscribe"
		as the Subject.