RE: HP Netraid... or booting to Hardware raid...

["Andrews, Bryan" <Bryan Andrews SecondShift Net>]

Yes it is marked at bootable. I've never 'ran' LILO besides using it to
boot... but when I /sbin/lilo it responds:

Added Linux *

[root me: /sbin]#

Does this mean it works? :|

-----Original Message-----
From: Lance A. Brown [mailto:brown9 niehs nih gov]
Sent: Thursday, August 05, 1999 7:10 AM
To: redhat-list redhat com
Subject: Re: HP Netraid... or booting to Hardware raid... 


Andrews, Bryan <Bryan Andrews SecondShift Net> writes:


> Yeah.. I have another set up with the system drives on the channel0 of the
> netraid. The 6.0 install (server default) found it... but it just won't
boot
> without the floppy... (it sees the drives fine). It doesn't get stuck at
LI
> either. It simply says 'Insert Bootable Medium' then boots from floppy
when
> I push it in.

> Hmmm....

Does this system have CMOS settings controlling the boot device
sequence?  If so, make sure the floppy is last.

Does /sbin/lilo run OK after you get booted?

--[Lance]


-- 
To unsubscribe: mail redhat-list-request redhat com with "unsubscribe"
as the Subject.