RE: sound config in 6.1

["Reimert, Scott" <Scott Reimert sbs siemens com>]

You haven't supplied enough information.

1) Is sound compiled as a module?
	If so, are the modules loading (in the right order)? Check with
'lsmod'
2) Are there resource conflicts? (IRQ/DMA/Ports) 
      Check with 'cat /proc/interrupts' etc.
3) Verify that you really have a Crystal PNP chipset.
4) Check /var/log/messages for clues.
5) Read the Sound-HOWTO and the Sound-Playing-HOWTO in /usr/doc (usually)

-- Scott
____________________________________________
Scott Reimert
Siemens Business Services (SBS)
4900 Old Ironsides Drive, M/S 408
Santa Clara, Ca.  95052-8075
*: 408.492.3874
*: Scott Reimert sbs siemens com
* Black holes are where God divided by zero *


-----Original Message-----
From: Daniel Goldin [mailto:dgoldin ix netcom com]
Sent: Thursday, December 16, 1999 10:35 AM
To: redhat-list redhat com
Cc: recipient list not shown
Subject: sound config in 6.1


No sound after install. I have, I believe, a Crystal PNP Audio
System (CODEC), MPU-401 compatible.

CS4232 Audio Device Driver

Not only do I not have sound, but the system freezes frequently on
reboot at this point.

               SCSI: 0 hosts
               SCSI: detected total

I'm a non-programmer, non-system-administrator trying cobble together
a humble Linux box. Thanks for any help.


-- 
To unsubscribe: mail redhat-list-request redhat com with "unsubscribe"
as the Subject.