Re: 3c509b EtherLink III

["Dalibor Marceta" <dalibor_marceta hotmail com>]

Thanks a lot. At least now I know that this combination works. Below is 
output.

#ifconfig
eth0   Link encap:Ethernet HWaddr 00:50:DA:05:F5:FA
      inet addr:24.113.219.210 Bcast:24.113.219.255 Mask:255.255.255.192
      UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
      RX packets:0 errors:0 dropped:0 overruns:0 frame:0
      TX packets:150 errors:0 dropped:0 overruns:0 carrier:0
      collision:0 txqueuelen:100
      Interrupt:10 Base address:0x300

lo     Link encap:Local Loopback
      inet addr:127.0.0.1 Mask:255.0.0.0
      UP LOOPBACK RUNNING MTU:3924 Metric:1
      RX packets:90 errors:0 dropped:0 overruns:0 frame:0
      TX packets:90 errors:0 dropped:0 overruns:0 carrier:0
      collision:0 txqueuelen:0

#netstat -rn
Kernel IP routing table
Destination    Gateway        Genmask         Flags MSS Window irtt Iface
24.113.219.210 0.0.0.0        255.255.255.255 UH      0 0      0 eth0
24.113.219.192 0.0.0.0        255.255.255.192 U       0 0      0 eth0
127.0.0.0      0.0.0.0        255.0.0.0       U       0 0      0 lo
0.0.0.0        24.113.219.193 0.0.0.0         UG      0 0      0 eth0

#traceroute 24.113.219.193
traceroute to 24.113.219.193 (24.113.219.193), 30 hops max, 38 byte packets 
1 localhosts.localdomain (24.113.219.210) 3008.726 ms !H 3009.496 ms !H 
3009.943 ms !H


> From: Edward Marczak <marczak usa net>
> Reply-To: redhat-list redhat com
> To: <redhat-list redhat com>
> Subject: Re: 3c509b EtherLink III
> Date: Sat, 04 Mar 2000 20:47:55 -0500
>
> on 4/3/2000 3:30 PM, Dalibor Marceta shot down the bitstream:
>
> > I have Red Hat 6.1 and rogers home  Network card is 3c509b. During
> > Installation only option I had was 3c509.
> > It seems working.
> > ifconfig -a ...  gives me that network is up.
> > netstat -re gives me output for my IP, Netmask and Loopback (gateway 
> listed
> > for them is * ???????) but it takes same time to show gateway address.
>
> What does the entry for 'default' show?  Or if you netstat -rn, what does
> the 0.0.0.0 entry read?
>
> > I can ping my self and loopback but can't my gateway.
> > traceroute and ping for any address outside gives me
> > "Destination Host Unreachable"
> > Cablemodem seems working ... I can see lights flashing for OnLine Rx and 
> Tx.
> >
> > How can I locate the problem? Any command which can help me? Any 
> experience
> > or driver?
>
> I use the 509b in several machines and it does work just fine (yes, with 
> the
> 509 driver).  Can you post your ifconfig and netstat -rn output?
> --
> Ed Marczak
> marczak usa net
>
>
> --
> To unsubscribe: mail redhat-list-request redhat com with "unsubscribe"
> as the Subject.

______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com