Re: network

[abe flonet com]

So I looked in hwconf.  Thats the first place I have seen any sign of my nic.
Here is what it looks like
class: NETWORK
bus: PCI
detached: 0
device: eth
driver: unknown
desc: "BROADCOM Corporation|unknown device 14e4:4401"
vendorId: 14e4
deviceId: 4401
subVendorId: 1043
subDeviceId: 80a8
pciType: 1

No sign of being "disabled"

im not sure what lspci is cause i couldn't run it.  Im almost sure my PATH 
is ok so im not sure what to do now.

Thanks a lot

At 01:39 PM 12/16/2002 -0600, you wrote:
> On Mon, 2002-12-16 at 12:34, Ben Russo wrote:
> > check your /etc/sysconfig/hwconf and see if it is listed as "disabled"
> > if it is then use "neat" and you might be able to "enable" it.
> >
> > With RH8 I have had this happen on several of my machines, the NIC would
> > work during the install process, then after the reboot the NIC wouldn't
> > come up, I checked the hwconf file and it was listed as disabled.
> >
> > Also check "lspci" that might give you some clues.
> >
>
> lspci is exactly what I was going to suggest only I usually run it with
> the -v option.
>
> You might need to run it as root to get all the information.
>
> lspci -v
>
> Bret
>
>
>
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request redhat com?subject=unsubscribe
> https://listman.redhat.com/mailman/listinfo/redhat-list