RE: Ethernet help

[Paul Hamm <paulhamm OpenRatings com>]

We will need a bit more information please.  RH version, what is the output
of "# ifconfig" what are the contents of /etc/modules.conf, oh below I see
DEVICE=eth0 I expect that ifcfg-eth1 is DEVICE=eth1, and what type of NIC
are you using?

-----Original Message-----
From: redhat nextnet com [mailto:redhat nextnet com]
Sent: Wednesday, February 27, 2002 7:09 PM
To: redhat-list redhat com
Subject: Ethernet help


Is there any software out there that I can use to test to see whether or not
my ethernet card is actually working? I have a two port card. Both lights
work on the card but I can't get either port to work. Both are configured as
follows:
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=static
IPADDR=xxx.xxx.xxx.xxx
NETMASK=255.255.255.248
GATEWAY= xxx.xxx.xxx.xxx

I have stopped and restarted the machine. Both eth0 and eth1 start up as
"OK" on startup. Can't ping in, can't ping out.
What am I missing?

Linda



_______________________________________________
Redhat-list mailing list
Redhat-list redhat com
https://listman.redhat.com/mailman/listinfo/redhat-list