RE: Help ! about network interface and mii-tool

[PACAUD Safia <safia pacaud siemens com>]

> Hi every body,
> 
> i like to configure 3 network devices on Fuul Duplex, i try this:
> 
> /sbin/mii-tool -F 100baseTx-FD
> 
> i have more error msg:
> 
> SIOCGMIIPHY on 'eth0' failed: Operation not supported
> SIOCGMIIPHY on 'eth1' failed: Operation not supported
> SIOCGMIIPHY on 'eth2' failed: Operation not supported
> no MII interfaces found
> 
> 
> type of my  3 network interaces eth0, eth1 and  eth2, are :
> 
> eth0: Intel(R) 8255x-based Ethernet Adapter
>   Mem:0xf8120000  IRQ:16  Speed:100 Mbps  Dx:Full
>   Hardware receive checksums enabled
>   ucode was not loaded
> 
> eth1: Intel(R) PRO/100+ Server Adapter (PILA8470B)
>   Mem:0xfa200000  IRQ:29  Speed:100 Mbps  Dx:Full
>   Hardware receive checksums enabled
>   ucode was not loaded
> 
> eth2: Intel(R) PRO/100+ Server Adapter (PILA8470B)
>   Mem:0xfa201000  IRQ:30  Speed:100 Mbps  Dx:Half
>   Hardware receive checksums enabled
>   ucode was not loaded
> 
> how can i do, 
> 
> 
> I work with SUSE 7.1
> 
> mailto:safia pacaud siemens com
>